The Complete A/C Diagnostic Tool Manufacturer,Supplier and Exporter in India
Product Code : EL-M-12790
Jlab Export is a leading The Complete A/C Diagnostic Tool Manufacturer,and suppliers in India
The Complete A/C Diagnostic Tool (code EL-M-12790) is an air-conditioning system analyser that calculates actual and target superheat, subcooling, temperature split, dry and wet bulb temperatures, relative humidity, dew point, air velocity and air flow volume. It covers refrigerants from R22 and R134a to R410A and R-32, takes a K-type thermocouple and an optional pressure transducer, and saves results for download. The analyser is manufactured in Ambala, India, by JLab.
Specifications
| Parameter | Detail |
|---|---|
| Calculates | Actual superheat, subcool, target superheat, temperature split, dry bulb, wet bulb, relative humidity, dew point, air velocity, air flow volume |
| Refrigerants | R22, R114, R123, R124, R134a, R141B, R142B, R401A, R401B, R404A, R407A, R407B, R407C, R407D, R408A, R409A, R410A, R411A, R411B, R414A, R414B, R417A, R507A, R-32 |
| Inputs | K-type thermocouple connection; optional pressure transducer; optional antenna-type meter |
| Display | Back-lit LCD; temperature in °F and °C; pressure in PSI and bar |
| Data | Results saved and downloaded in spreadsheet format; USB connection |
| Power | AAA or AA batteries; low-battery indicator |
| Operating conditions | 0 to 50 °C, humidity below 80% |
| Storage conditions | -20 to 50 °C (-4 to 122 °F), humidity below 90% |
| Dimensions with boot | 191 × 93 × 41 mm |
| Case | Blow-moulded plastic box |
| Quality check | Each A/C analyser is visually inspected before dispatch |
| Pack quantity | Each (sold individually) |
| Minimum order quantity | 5 units |
| Dispatch time | Usually 7–10 working days |
| Product code | EL-M-12790 |
| Manufacturer | Jain Laboratory Instruments Pvt Ltd (JLab) — OEM |
| Country of origin | India (made in Ambala, Haryana) |
Superheat, Subcool and Target Superheat
Actual superheat is the suction line temperature minus the saturation temperature at suction pressure, and subcooling is the saturation temperature at liquid line pressure minus the liquid line temperature. The K-type thermocouple input takes the line temperatures, and the optional pressure transducer gives direct system pressure readings. Target superheat is the superheat a fixed-orifice system should show under the present indoor wet-bulb and outdoor dry-bulb conditions; comparing it with the actual figure shows whether the refrigerant charge needs adjusting.
Air-Side Readings and Airflow
On the air side it reads air velocity, dry and wet bulb temperatures, relative humidity and dew point, and works out air flow volume as air velocity times the area of the duct or grille. Temperature split is the drop in air temperature across the indoor coil, from return air to supply air. An optional antenna-type meter reaches hard-to-reach locations, and results can be saved and downloaded in spreadsheet format for later use.
Other HVAC Diagnostic Tools
- Subcool/Superheat Calculator — superheat and subcool for 37 refrigerants, with bubble and dew point display.
- Airflow + Psychrometer — reads humidity, dew point, wet bulb, air velocity, air volume and BTU.
- Wireless Vacuum Gauge And P/T Gauge Combination — vacuum gauge combined with a P/T gauge, working up to 700 psia.
Other HVAC and field meters are in Miscellaneous, under Test and Measurement Equipment.
Request a Quote
Order the analyser through Add To Cart, or request a quotation on the contact page with the quantity and the delivery address.
Last updated: 30 October 2026