General Laboratory Equipment Manufacturer, Suppliers and Exporter in India

Jlabexport is a leading General Laboratory Equipment Manufacturer,and suppliers in India

General laboratory equipment includes instruments used for electrophoresis, optical measurement, refractive-index testing, viscosity testing, flash-point work, material testing and other analytical laboratory procedures. JLab Export manufactures and exports general laboratory equipment for schools, universities, TVET institutions, research laboratories and industrial users.

The visible category range includes electrophoresis systems and power supplies, refractometers, a research polarimeter, flash-point apparatus, viscometers, a motorized ring-and-ball apparatus and a pyrogen-testing instrument. These products serve different laboratory disciplines and cannot be selected from the category name alone.

Buyers should identify the intended test, required measuring range, electrical supply, sample type, operating method and applicable documentation before requesting a quotation. Product-level specifications are incomplete for several listed items. Any omitted range, accuracy, construction, capacity, accessory or compliance detail should therefore be confirmed through a model-specific datasheet or written quotation.

How do you choose general laboratory equipment?

Choose general laboratory equipment by first defining the test or measurement to be performed. Then compare the required range, accuracy, operating mode, sample compatibility, electrical conditions and included components with the proposed model.

An electrophoresis setup requires different selection criteria from a refractometer, polarimeter, viscometer or flash-point apparatus. Buyers should therefore submit a separate specification for each instrument rather than using one general laboratory description.

Schools and TVET institutions should identify whether the product is intended for demonstration or supervised practical work. Universities, research laboratories and industrial users should request a line-by-line technical comparison. Where the category page does not state a parameter, treat the specification as available on request rather than assuming a value.

Which general laboratory equipment products are listed?

The JLab Export category currently displays ten products covering electrophoresis, refractometry, polarimetry, flash-point testing, viscosity-related work, ring-and-ball testing and pyrogen-related laboratory requirements.

The listed products are:

• Horizontal Electrophoresis System
• Digital Electrophoresis Power Supply
• Butyro Refractrometer
• Abbe Refreactrometer
• Research Polarimeter
• Abels Flash Point Apparatus
• Red Wood Viscometer
• Motorized Ring and Ball Apparatus
• Saybolt Viscometer Apparatus
• Pyrogen Testing Instrument

Product codes are shown for these listings, but complete technical specifications are not available for every product on the category page. Buyers should confirm the exact model, supplied configuration and current product naming before ordering.

What equipment is available for electrophoresis?

JLab Export lists a Horizontal Electrophoresis System and a Digital Electrophoresis Power Supply. The system is described for analytical separation work involving DNA, while the power supply is stated to provide constant-current operation.

The Digital Electrophoresis Power Supply is listed with a selectable current from 1 mA to 100 mA and a maximum voltage of 500 V. Buyers should still confirm the number and type of output terminals, display, adjustment method, protection features, input supply and included cables.

For a complete electrophoresis requirement, the enquiry should identify whether both the separation system and power supply are needed. Tank dimensions, gel format, buffer volume, combs, trays and accessories are not stated in the category summary and should be requested separately.

How should a laboratory refractometer be selected?

Select a refractometer by matching its scale, measuring range, reading method and stated accuracy to the sample and laboratory procedure. JLab Export lists a Butyro Refractrometer and an Abbe Refreactometer-type instrument in this category.

The Butyro instrument is described with a double scale. Its oil or Butyro scale is stated to cover 0 to 100, with an accuracy written as “+ 0.1” on the source page.

The Abbe instrument is listed for refractive-index measurement over a range of 1.3 to 1.7. The stated reading accuracy is 0.001 directly from the scale and 0.0001 by estimation. Buyers should verify the exact instrument name, scale configuration, temperature arrangement and supplied accessories before technical approval.

What should buyers check when selecting a research polarimeter?

A research polarimeter should be selected according to the required angular scale, sample arrangement, reading method and intended measurement. JLab Exports listing refers to an optical design intended to maintain focus and a glass scale marked in angular degrees.

The listed scale also carries a sugar scale in I.S.S. units. No complete measuring range, least count, tube length, illumination arrangement or accessory list is supplied in the category description.

Buyers should state whether the instrument is required for teaching, routine laboratory measurement, research or industrial testing. Request a model-specific datasheet showing the complete scale, reading system, sample-tube configuration and included components before comparing it with another polarimeter.

How should viscosity-testing apparatus be compared?

Compare viscosity-testing apparatus by confirming the intended method, sample type, operating temperature, timing arrangement, heating system, stirring method and electrical supply. JLab Export lists a Red Wood Viscometer and a Saybolt Viscometer Apparatus.

The Saybolt Viscometer Apparatus is described with manual stirring through a turntable arrangement and suitability for operation on 220 V AC mains. The Red Wood Viscometer listing does not provide a usable measuring range, model type or detailed configuration.

Buyers should request information about the bath, test cup, thermometer arrangement, timing accessories, heater, controller and supplied orifice where applicable. The product name alone does not establish conformity with a particular test method or standard.

What is listed for flash-point and softening-related testing?

The category lists an Abels Flash Point Apparatus and a Motorized Ring and Ball Apparatus. These are separate test-apparatus groups and should be specified according to the material, required method and operating conditions.

No technical description is shown for the Abels Flash Point Apparatus on the category page. Its heating arrangement, test cup, thermometer, ignition system and electrical requirements must therefore be requested.

The Motorized Ring and Ball Apparatus is described only as electrically operated and motorized. Buyers should confirm the supplied rings, balls, support assembly, bath, heating system, stirrer, temperature measurement and power requirements. Do not attach a test-standard claim unless product-level documentation confirms it.

What should be verified for a pyrogen-testing instrument?

The listed Pyrogen Testing Instrument is described for pyrogen-related drug testing involving rabbits or rats and for measuring animal temperature. Its technical configuration, intended protocol and product-level regulatory status are not supplied.

Before procurement, buyers should confirm the number of measurement channels, sensor or probe type, temperature range, resolution, display, recording method, electrical supply and included accessories.

The institution must also determine whether the intended use is permitted under its applicable research, animal-welfare, ethical and regulatory requirements. The website listing alone is not sufficient to establish protocol suitability, regulatory acceptance or approval for a particular laboratory procedure.

How should schools, universities and TVET institutions specify this equipment?

Educational institutions should specify each instrument according to the planned practical activity, learner level, laboratory facilities and required supervision. A product intended for basic demonstration may need a different configuration from equipment used for advanced measurement or research.

The enquiry should include the instrument name, required range, accuracy, electrical supply, accessories, quantity and documentation. Institutions should also identify whether operating instructions, installation assistance or training are required.

JLab Export states that its equipment can be customised for curricular, institutional or industrial requirements. It also states that packaging, documentation, installation assistance and training modules are available with most equipment. These services should be confirmed for each quoted item because the source does not state that they apply to every product.

What should research and industrial buyers verify?

Research and industrial buyers should verify the complete measurement method, range, accuracy, repeatability requirements, sample compatibility, controls and data needs. Short category descriptions should not be used as substitutes for model-specific technical documentation.

For electrically operated equipment, confirm voltage, frequency, power, protection and connection requirements. For optical instruments, verify scales, reading systems, sample holders and illumination. For viscosity, flash-point or softening-related apparatus, define the required test procedure and accessories.

Where an equivalent instrument is offered, request a line-by-line comparison identifying every compliance point and deviation. The final make, model, specification and supplied configuration should appear in the accepted quotation or datasheet.

What should tender and bulk buyers include in an enquiry?

Tender and bulk buyers should submit a complete BOQ with separate lines for every instrument, required specification, quantity, destination and documentation requirement. This enables the offered make, model and any deviation to be declared before procurement.

JLab Exports tender page states that buyers can receive line-by-line BOQ quotations, technical datasheets, compliance documentation and export-grade packing. It also describes itemised quotations with make, model and deviation information, with manufacturer-side documents provided as applicable to the tender.

For general laboratory equipment, the BOQ should include measuring ranges, accuracy, electrical supply, controls, accessories and the required test method. Do not combine unrelated electrophoresis, optical and material-testing instruments under one generic line.

General Laboratory Equipment Types

Product types and stated values are derived from the visible category listings.

General Laboratory Equipment Selection Criteria

JLab Export Product and Enquiry Links

• View the complete product range
• Submit a tender or BOQ enquiry
• Learn about JLab Export
• Read frequently asked questions
• Contact JLab Export
• Visit the JLab Export homepage

Frequently Asked Questions

What is general laboratory equipment?

General laboratory equipment includes instruments used for electrophoresis, optical measurement, refractive-index work, polarimetry, viscosity testing, flash-point procedures, ring-and-ball testing and other laboratory measurements. The JLab Export category currently displays ten product listings.

Who can use JLab Export general laboratory equipment?

The stated audience includes schools, universities, TVET institutions, research laboratories and industrial users. The appropriate instrument should be selected according to the intended procedure, technical specification, laboratory facilities and user experience.

What electrophoresis equipment is available?

JLab Export lists a Horizontal Electrophoresis System and a Digital Electrophoresis Power Supply. The power supply is stated to operate in constant-current mode from 1 mA to 100 mA, with a maximum output of 500 V.

What is the stated range of the Abbe refractometer?

The listed Abbe refractometer has a stated refractive-index range of 1.3 to 1.7. The category description states an accuracy of 0.001 by direct scale reading and 0.0001 by estimation.

Does the Saybolt Viscometer Apparatus require electricity?

Yes. The category description states that the Saybolt Viscometer Apparatus is suitable for operation on 220 V AC mains, while stirring is performed manually through a turntable arrangement.

Are complete technical specifications available for every product?

No. Several category listings provide only a product name or a limited description. Buyers should request model-specific ranges, accuracy, construction, controls, accessories and electrical requirements before comparing products or placing an order.

Can general laboratory equipment be customised?

JLab Export states that its equipment can be customised for curricular, institutional or industrial requirements. The required modification and final configuration should be recorded in the approved quotation, technical datasheet or drawing.

Can JLab Export quote against a general laboratory equipment BOQ?

Yes. JLab Exports tender page states that buyers can submit a BOQ and receive a line-by-line quotation with technical datasheets, compliance documentation and declared deviations or equivalents.

Request General Laboratory Equipment Specifications

Send the required instrument names, technical specifications, quantities, intended applications and delivery destination to JLab Export.

Request a Quote

Request Catalogue

Submit a Tender or BOQ