Condensers Manufacturer, Suppliers and Exporter in India

Jlabexport is a leading Condensers Manufacturer,and suppliers in India

Laboratory condensers are glassware components used to cool vapour and convert it into liquid during distillation, reflux and solvent-recovery procedures. This category is intended for schools, universities, TVET institutions, research laboratories and industrial buyers selecting condensers by design, cooling surface area, effective length, overall length and laboratory joint configuration.

Jlab Export is a Manufacturer & Exporter of air, Allihn, Graham coil, double-surface Davies, jacketed-coil and Liebig condensers from Ambala, India. The category contains six listed products, with product codes from JL-C-1596 to JL-C-1601. Confirmed effective lengths range from 60 mm to 550 mm, while listed socket and cone options extend from B10 to B50, depending on the condenser design. Some configurations are listed without a socket, and selected Allihn and Graham models can be ordered with threaded connections instead of water connections.

Jlab Export states that it serves markets across Asia, Africa, Europe, North America, South America and Oceania.

What products are included in the Condensers category?

The Condensers category contains six laboratory condenser designs: air, Allihn, Graham coil, double-surface Davies, jacketed coil and Liebig. Each product has a separate JL-C code and a specification table covering some combination of cooling surface area, effective length, overall length, socket size, cone size or catalogue item number.

The listed products are:

• Condensers Air — JL-C-1596
• Condensers Allihn — JL-C-1597
• Condensers Coil Graham — JL-C-1598
• Condensers Double Surface Davies — JL-C-1599
• Condensers Jacketed Coil — JL-C-1600
• Condensers, Liebig — JL-C-1601

The individual listings do not consistently state glass composition, water-connection diameter, wall thickness, hose requirements or operating limits. Specifications are available on request.

How do you choose a laboratory condenser?

Choose a laboratory condenser by matching the design, effective cooling length, surface area and both joint connections to the intended apparatus. Buyers should also confirm whether the model requires water connections, threaded connections or no socket at one end, because the available configurations vary substantially across the six products.

Use this selection sequence:

1. Identify the required condenser design.
2. Select the listed effective length.
3. Confirm cooling surface area where stated.
4. Match the socket size.
5. Match the cone size.
6. Check the overall length against the apparatus.
7. Confirm water or threaded connection requirements.
8. Request missing construction and operating specifications.

A request based only on length is insufficient because multiple condensers may share the same effective length while differing in surface area, overall length and joints.

Which air condenser configurations are listed?

Air Condenser JL-C-1596 is listed in seven configurations with surface areas from 30 cm² to 500 cm², effective lengths from 100 mm to 550 mm and overall lengths from 120 mm to 570 mm. Socket and cone options range from B10 to B29.

Buyers should state all five fields because the same surface area or effective length may appear in more than one configuration.

Which Allihn condenser sizes are available?

Allihn Condenser JL-C-1597 is listed mainly with a 200 mm effective length, with cone sizes from B19 to B50. One jointed configuration has a 300 mm effective length with B24 socket and B24 cone. The page also states that threaded connections can replace water connections by adding “/T” to the code number.

The meaning of the missing socket entries should be confirmed before quotation or publication.

What Graham coil condenser options are listed?

Graham Coil Condenser JL-C-1598 is offered with effective lengths of 150 mm, 200 mm and 300 mm. Listed surface areas range from 230 cm² to 450 cm², and available cone sizes extend from B19 to B50. Selected versions have matching sockets, while others show no socket.

The page also states that threaded connections are available instead of water connections by adding “/T” to the code number.

Which double-surface Davies condenser configurations are available?

Double-Surface Davies Condenser JL-C-1599 is listed with effective lengths of 150 mm or 200 mm and surface areas from 180 cm² to 300 cm². Most configurations have matching socket and cone sizes, while one 200 mm model lists no socket and a B24 cone.

Buyers should verify whether the socket-free entry is an intentional cone-only version or an incomplete specification.

What jacketed-coil condenser sizes are listed?

Jacketed Coil Condenser JL-C-1600 is listed with a 430 cm² surface area and 150 mm effective length across all four configurations. Three options have matching B19, B24 or B29 socket-and-cone joints, while the fourth lists no socket and a B34 cone.

The product page does not provide coil diameter, jacket diameter, water-connection size or cooling-fluid requirements. These details should be requested where apparatus compatibility or performance must be evaluated.

Which Liebig condenser models are available?

Liebig Condenser JL-C-1601 is listed in seven catalogue configurations with effective lengths from 60 mm to 400 mm. Socket and cone sizes are matched within each entry and range from B10 to B29.

The product table also contains an “Each” column with unexplained numerical values. These values should not be published as prices or specifications until their meaning and currency are confirmed.

How should schools, universities and TVET institutions select condensers?

Educational institutions should select condensers from the practical schedule or apparatus list, then confirm design, effective length and joint compatibility. A school, university or TVET buyer should not substitute one condenser type for another solely because the length or joint size appears similar.

The enquiry should include:

• Product name and JL-C code
• Required condenser type
• Effective length
• Overall length
• Surface area, where specified
• Socket size
• Cone size
• Water or threaded connection requirement
• Number required per laboratory
• Packing and documentation requirements

Where the BOQ states only “laboratory condenser,” request a technical compliance statement identifying the exact product proposed.

What should research and industrial buyers verify?

Research and industrial buyers should verify the condensers material, cooling-path dimensions, joint tolerances and operating limitations. The individual listings provide dimensional combinations but do not consistently establish glass grade, water-flow requirements, thermal-shock resistance or pressure and vacuum suitability.

Request confirmation of:

• Glass material and grade
• Inner and outer tube diameters
• Coil or bulb dimensions
• Water-connection diameter and type
• Recommended cooling-fluid direction
• Joint tolerances
• Wall thickness
• Temperature limitations
• Chemical compatibility
• Pressure or vacuum suitability
• Included tubing or accessories

Product-specific technical documents should identify the exact JL-C code and configuration.

What should tender and bulk buyers include in an enquiry?

Tender and bulk buyers should submit the JL-C product code, complete dimensional combination, quantity, destination and documentation requirements. Jlab Export states that applicable institutional orders can include line-by-line BOQ quotations, technical datasheets, compliance documentation and export-grade packing.

Include:

• Tender or project reference
• Product name and code
• Surface area
• Effective and overall lengths
• Socket and cone sizes
• Water or threaded connection
• Material specification
• Quantity
• Inspection requirements
• Packing and carton markings
• Delivery country
• Required certificates or declarations
• Submission deadline

Any deviation from the BOQ should be identified in the technical quotation before approval.

Condenser Product Types

The table reflects only the configurations and dimensions stated on the category and individual product pages.

Condenser Selection Criteria

Jlab Export Links

• Jlab Export Home
• View Product Categories
• Condensers Category
• Laboratory and TVET Tender Supply
• About Jlab Export
• Frequently Asked Questions
• Contact Jlab Export

Frequently Asked Questions

How many products are listed in the Condensers category?

The category contains six products with codes from JL-C-1596 to JL-C-1601: Air, Allihn, Graham Coil, Double Surface Davies, Jacketed Coil and Liebig condensers.

What effective lengths are available for air condensers?

Air Condenser JL-C-1596 is listed with effective lengths of 100, 150, 200, 300, 400 and 550 mm. Some lengths appear with different surface areas or joints, so the complete configuration must be specified.

Can Allihn condensers be supplied with threaded connections?

Yes. The Allihn product page states that threaded connections are available instead of water connections at no extra cost and instructs buyers to add “/T” to the code number. The required thread specification should still be confirmed before ordering.

What is the largest surface area listed for a Graham condenser?

The largest surface area shown for Graham Coil Condenser JL-C-1598 is 450 cm², paired with a 300 mm effective length and 420 mm overall length. B19, B24 and B29 matching socket-and-cone options are listed for this configuration.

What effective length is listed for jacketed-coil condensers?

All four Jacketed Coil Condenser JL-C-1600 configurations show an effective length of 150 mm and a surface area of 430 cm². Their overall lengths and joint combinations vary.

What is the shortest Liebig condenser listed?

The shortest listed Liebig model is catalogue item CL60/00, with a 60 mm effective length, B10 socket and B10 cone.

Are glass material and operating limits confirmed online?

No. The individual listings do not consistently state glass composition, wall thickness, water-connection dimensions, chemical compatibility, temperature limits, or pressure and vacuum suitability. These specifications should be requested for the selected product code.

Are the stated certifications product-specific?

Product-specific certificates are not supplied on the six individual listings. The category and About pages contain manufacturer-stated certification and standards claims, but their validity, scope and applicability must be verified before publication or procurement.

Request a Quote for Laboratory Condensers

Request current configurations, effective and overall lengths, surface areas, joint sizes, connection details, documentation, quantity-based pricing and export-packing information.

Request a Quote

Request Catalogue