Home » Our Product » Technical and Vocational Education and Training TVET

Technical and Vocational Education and Training TVET Manufacturer, Suppliers and Exporter in India

Jlabexport is a leading Technical and Vocational Education and Training TVET Manufacturer,and suppliers in India

Technical and Vocational Education and Training (TVET) equipment is the workshop machinery, trade tool sets, testing rigs and safety gear used to teach practical trades — welding, fabrication, machining, woodwork, plumbing, automobile work, construction testing and textiles — in polytechnics, ITIs, vocational institutes, universities and industry training centres. Jlab Export manufactures and exports TVET equipment from Ambala, Haryana, India, and organises its catalogue into 18 trade-specific ranges so a buyer equipping a single workshop can order against one trade at a time rather than a general list.

This category is the entry point to those 18 ranges. It does not list individual products directly; each trade range below holds its own product listings with codes and published specifications. Supply is quotation-based — items are configured and priced per enquiry rather than sold through an online checkout.

What counts as TVET equipment, and how is it different from science lab equipment?

TVET equipment trains occupational competence on production-grade hardware; school science equipment demonstrates scientific principles. A welding set, a pillar drill and a surface grinder are TVET items because a trainee must operate the same class of machine on the job. The distinction matters for procurement because TVET items carry industrial duty cycles, guarding and consumable requirements that classroom apparatus does not.

In practice, that changes three things about how you buy. Machines need a workshop power supply and floor fixing rather than a bench socket. Personal protective equipment is part of the specification, not an accessory. And consumables — electrodes, discs, wire, blades — carry ongoing cost that should be quoted alongside the machine.

Which trade ranges does Jlab Export list under TVET?

Jlab Export lists 18 trade ranges under TVET: workshop tools, electrical work bench, three welding and fabrication ranges, two woodworking ranges, CNC trainer machines, training workshop labs, automobile engineering, plumbing, theory of machines, concrete laboratory, soil mechanics, hydraulics and pneumatics, metal manufacturing training machines, washing machine, and textile technology.

The ranges are trade-shaped rather than discipline-shaped. Civil-trade content sits in Concrete Laboratory and Soil Mechanics; mechanical-trade content in Theory of Machines and Metal Manufacturing; services trades in Plumbing and Electrical Work Bench. Buyers equipping a multi-trade centre will usually draw from several ranges in one enquiry.

How do you choose TVET equipment for a vocational institute?

Start from the trade curriculum and the number of trainees per session, then work backwards to machine count. Specify each machine by the operation it must teach, the destination power supply, and the guarding standard your inspectorate requires. Ask for the consumables list and spare-parts availability in the same quotation as the machine.

Institutional buyers also need documentation that survives an audit: model numbers, published specifications, a packing list, and — where a standard or certification is claimed — the certificate itself rather than a claim in copy. On this site, published specifications vary in depth from range to range, so request the datasheet for any item where the listing shows only a short description.

What should you check before ordering welding and fabrication equipment?

Confirm the process (ARC/SMAW, MIG/MAG, TIG, spot or gas), the current range and duty cycle, the input voltage and phase for your country, and whether the quotation includes torches, cables, regulators and personal protective equipment. Welding is the trade where a set list, not a machine name, determines whether a workshop is actually usable on day one.

Jlab Export currently spreads welding across three separate ranges — Standard Welding Equipment Set, Welding Equipment and Workshop Lab Machine, and Plant Engineering and Welding Equipment — and the same process types appear in more than one of them. When enquiring, state the processes and station count you need rather than the range name, so the quotation is built from your requirement instead of the menu structure.

What is actually listed in the main TVET ranges?

Trade range	Representative items published on the site	Typical training use
Standard Welding Equipment Set	Shielded metal ARC welding machine, TIG welding machine, plasma cutting machine, power hacksaw, hacksaw frame, angle grinder, manual hand shear, bend test equipment, hydraulic pipe bending machine, welding shield, safety helmet, grinding goggles, gas welding goggles, welding leather gloves, welders apron	Basic-to-intermediate welding bays with cutting, forming and PPE in one set
Welding Equipment and Workshop Lab Machine	ARC welding transformer, ARC welding machine, MIG welding machine, TIG welding equipment, spot welding machine, gas welding equipment, oxy-acetylene equipment, electric shear, hydraulic steel worker, pillar drill machine, high precision surface grinder, universal tool and cutter grinder, compressor analyzer, electronic leak detector, digital clamp meter	Combined fabrication and machine-shop workshops covering multiple welding processes plus drilling and grinding
Plant Engineering and Welding Equipment	MIG welding machine, TIG welding machine, hand drill machine	Small supplementary welding station
Workshop Tools	Masonry saw, vibrating table, rammer, block making machine, site dumper, scaffold platform, hoisting equipment, poker vibrator, screwdrivers, socket set with ratchet handle, open-end spanner sets	Construction-site practice and general hand-tool training

Ranges not shown in this table are listed in the subcategory block below. Their contents were not individually confirmed in this review — request the current item list for any range before building it into a tender.

What selection criteria should appear in your specification?

Criterion	What to check
Power supply	Voltage, phase and frequency at the destination site; confirm before shipment, not after
Duty cycle and rated capacity	Continuous-use rating for machines that will run through back-to-back training sessions
Guarding and interlocks	Guards, emergency stop and eye shields specified on the quotation, not assumed
Personal protective equipment	Whether shields, goggles, gloves and aprons are inside the set price or quoted separately
Consumables	Electrodes, wire, gas, discs and blades — quantity supplied and reorder route
Installation and commissioning	Foundation or bench-fixing requirement, and who commissions on arrival
Documentation	Model numbers, published specifications, packing list, and certificates where a standard is claimed
Spares and service	Availability of wear parts and the lead time for them
Export packing and terms	Packing standard, Incoterm, port of loading and lead time — request in writing
Trade fit	Whether the item matches the trade syllabus being taught, since several ranges here overlap

Who is this equipment for?

Jlab Export states school, university, TVET, research and industry as its audience for this range. In practice, the buyers for a TVET category are polytechnics and ITIs, national and regional vocational training centres, university workshop departments, industry training divisions, and the ministries and agencies that procure for them.

Enquiries from this category commonly come in one of two shapes: a single-trade top-up, where an existing workshop needs replacement machines or PPE, and a full-workshop fit-out, where a trade bay is being equipped from empty. State which you are, and the item list should come back scoped accordingly.

Compliance and documentation

Jlab Export is based at Hargolal Road, Ambala, Haryana, India, and trades as Jain Laboratory Instruments Pvt. Ltd. Any standard, certification or conformity relevant to a specific machine should be requested as a certificate against that model at quotation stage. Certifications listed elsewhere on this website are manufacturer-stated and should be verified against current certificates before they are relied on in a tender submission.

Explore the TVET trade ranges

Related categories

Frequently asked questions

Does Jlab Export manufacture TVET equipment or resell it?

Jlab Export presents itself as a manufacturer, supplier and exporter of this range, operating from Ambala, Haryana. Individual product listings on the site are not uniformly worded on this point, so if manufacturing origin matters for your tender, ask for it to be confirmed in writing per line item at quotation stage rather than inferred from category copy.

Can I order TVET equipment online from this website?

No. This category is quotation-based. Item lists, configurations and prices are issued against a written enquiry that states the trade, the number of training stations and the destination country. Use Request a Quote on this page, or the enquiry route on the contact page, and include your syllabus or tender document if you have one.

Which trades are covered by the TVET range?

Eighteen trade ranges are listed: workshop tools, electrical work bench, three welding and fabrication ranges, two woodworking ranges, CNC trainer machines, training workshop labs, automobile engineering, plumbing, theory of machines, concrete laboratory, soil mechanics, hydraulics and pneumatics, metal manufacturing training machines, washing machine and textile technology.

Why does welding appear in three different categories?

The catalogue currently splits welding across Standard Welding Equipment Set, Welding Equipment and Workshop Lab Machine, and Plant Engineering and Welding Equipment, and the same processes appear in more than one. Treat all three as one welding catalogue when enquiring: state the processes, current ratings and station count you need, and ask for a consolidated list rather than choosing by category name.

Does the quotation include personal protective equipment and consumables?

Not automatically. PPE appears as separate listings in the Standard Welding Equipment Set range — shields, helmets, goggles, gloves and aprons — and consumables are not published as part of machine listings. Ask for PPE quantities per training station and a first-fill consumables allowance to be priced explicitly in your quotation.

What documentation is available for tender submissions?

Model numbers and published specifications are available for the items listed on this site, and a packing list and export documentation are issued per shipment. Any certification or standard you intend to cite in a tender should be requested as a current certificate against the specific model, since claims made in website copy are not a substitute for documentation.

Request a quote

Send your trade, station count, destination country and any tender document, and we will return a scoped item list with specifications and export terms.

Request a Quote ·Request Catalogue ·Tenders / OEM enquiries