• +91-85699-09696

Motorized Ring and Ball Apparatus Manufacturer,Supplier and Exporter in India

Motorized Ring and Ball Apparatus

Product Code : EL-GLE-4010
Jlab Export is a leading Motorized Ring and Ball Apparatus Manufacturer,and suppliers in India

The ring and ball apparatus finds the softening point of bitumen. A steel ball rests on a disc of the sample held in a ring, and the bath around it is heated and stirred. The softening point is the temperature at which the softened bitumen lets the ball sink through. This model is electrically operated and motorised.

Specifications

TestSoftening point by the ring and ball method
OperationElectrically operated, motorised
Minimum order quantity1 unit
Dispatch timeUsually 7–10 working days
ManufacturerJLab (Jain Laboratory Instruments Pvt Ltd), Ambala, India

Highway Materials Lab Exercises

In a civil engineering highway lab, students test two or three grades of bitumen. They compare the softening points with the penetration of the same grades, measured on a Digital Penetrometer. While the bath heats, one student reads the thermometer against a Digital Stop Watch every minute to check that the rise stays even.

Frequently Asked Questions

What does the motorised version do differently?
A motor drives the stirrer, so the bath is mixed at a steady rate through the whole test. With hand stirring the bath can heat unevenly, and the two balls may drop at different temperatures.

Which liquid goes in the bath?
Freshly boiled distilled water is used for bitumens that soften at lower temperatures. Glycerine is used for harder grades with high softening points, because water would boil before the ball drops.

Why must the temperature rise at a steady rate?
The softening point is not a true melting point. It depends on how fast the bitumen is heated, and a faster rise gives a higher reading. The test method fixes the rate of rise, so students check it against the clock every minute.

Why are two rings tested at once?
Two discs from the same sample are heated side by side, and the softening point is the mean of the two temperatures. If they differ by more than the method allows, the test is repeated with fresh discs.

What does a high softening point tell an engineer?
A higher softening point means the bitumen stays firm at higher road temperatures, so it suits hot climates and heavy traffic. Softer grades are easier to work but can bleed and rut in summer.

Other Bitumen and Oil Testing Apparatus

For a quote, use Add To Cart or send us a message through the contact page.

Last updated: 12 November 2026


   

Office Address

Works: 2475-84,
Hargolal Road,Ambala, Haryana

[email protected]

+91-85699-09696

Follow Us