Kaplan Turbine Test Setup Manufacturer,Supplier and Exporter in India
Product Code : EL-HM-10034
Jlab Export is a leading Kaplan Turbine Test Setup Manufacturer,and suppliers in India
Kaplan Turbine Test Setup (code EL-HM-10034) is an axial-flow reaction turbine rig for low heads: water passes stationary guide vanes, flows axially through a runner with adjustable curved airfoil vanes on its hub and leaves through a draught tube. It comes in two models, HM 109 (1.33 HP) and HM 109 (5 HP), both for a 5 m supply head. Both Kaplan models are manufactured by JLab in Ambala, India.
Specifications
| Parameter | Detail |
|---|---|
| Models | HM 109 (1.33 HP) and HM 109 (5 HP) |
| Output power | 1.33 HP / 1 kW; 5 HP / 3.75 kW |
| Discharge (approx.) | 1500 LPM; 5000 LPM |
| Supply head | 5 m (both models) |
| Rope brake dynamometer | 200 mm dia; 300 mm dia |
| Sump tank | 300 litres; 600 litres |
| Circulation pump | Centrifugal, 7 HP; 20 HP; three phase |
| Speed | 1500 rpm (approx.) |
| Runner | Adjustable curved vanes |
| Discharge measurement | Pitot tube with manometer |
| Quality check | Each turbine test setup is visually inspected before dispatch |
| Pack quantity | Each (sold individually) |
| Minimum order quantity | 1 unit |
| Dispatch time | Usually 14–18 working days |
| Product code | EL-HM-10034 |
| Manufacturer | Jain Laboratory Instruments Pvt Ltd (JLab) — OEM |
| Country of origin | India (made in Ambala, Haryana) |
Why Kaplan Turbines Suit Low Heads
Turbine power is proportional to QH, so as the head falls the discharge must rise to give the same power. Axial flow through the runner lets a large discharge pass through a compact scroll casing. Adjusting the curved runner vanes keeps the angle at which water meets them suitable as the flow changes, which holds efficiency up at part load. A transparent acrylic cylinder between the casing and draught tube shows the flow onto the vanes, and pressure and vacuum gauges at inlet and outlet give the total supply head.
Choosing Between the 1.33 HP and 5 HP Models
The 5 HP model, rated 3.75 kW, passes about 5000 LPM and uses a 300 mm rope brake dynamometer, a 600 litre sump tank and a 20 HP circulation pump; the 1.33 HP model, rated 1 kW, passes about 1500 LPM with a 200 mm rope brake, a 300 litre sump and a 7 HP pump. In both, discharge is measured with a Pitot tube and manometer, so efficiency is the brake output divided by ρgQH. The control panel carries a star/delta starter, mains indicator and MCB for overload protection, and the rig needs water supply, drain and a 15 kW, 440 V AC, three-phase supply.
Other Turbines and the Kaplan Test Rig
- Pelton Wheel Turbine Test Setup — impulse turbine for high heads, with spear-regulated nozzle.
- Francis Turbine Test Setup — radial-entry, axial-exit reaction turbine in an air-tight casing.
- Kaplan Turbine Test Rig — 5 HP Kaplan rig with rope brake and orifice-meter input measurement.
More turbines and pumps are in Hydraulic Machine, a part of Fluid Mechanics and Hydraulics Lab Equipment.
Request a Quote
State the model (1.33 HP or 5 HP), the quantity and the delivery address when you use Add To Cart or the contact page.
Last updated: 30 October 2026
