Fluid Machines and Hydraulic Machines Models Manufacturer,Supplier and Exporter in India
Product Code : EL-HM-10040
Jlab Export is a leading Fluid Machines and Hydraulic Machines Models Manufacturer,and suppliers in India
Fluid Machines and Hydraulic Machines Models (code EL-HM-10040) is a range of teaching models for a fluid mechanics and hydraulic machines lab: flow-measuring devices, manometers, valve models, a set of 8 pump and turbine runners, and models of turbines, pumps and a hydro-electric power installation. Lecturers use them to show each machine before students run the test rigs. JLab builds this range of hydraulics models in Ambala, India.
Specifications
| Parameter | Detail |
|---|---|
| Flow measurement | Hook gauge, venturimeter, orificemeter |
| Manometers | Pitot tube; U-tube, double column, differential and inclined manometers |
| Valve models | Hydraulic non-return valve, gate valve, globe valve |
| Runner set | Set of 8: mixed flow, axial flow, radial (centrifugal), Kaplan, Francis and Pelton wheel runners in cast aluminium; domestic self-priming pump runner in brass; actual centrifugal runner in cast iron |
| Turbine models | Pelton, De Laval, Kaplan, Francis, pure reaction, radial, air or steam pressure; impulse turbine working model |
| Pump models | Gear, rotary, air lift, pendulum, Archimedean screw, deep well turbine, submersible |
| Actual cut sections | Centrifugal pump, reciprocating pump |
| Other models | Display board for pipes, hydraulic elevator, hydraulic ram (non-working), tubewell, hydro-electric power installation |
| Quality check | Each model is visually inspected before dispatch |
| Pack quantity | Each (sold individually) |
| Minimum order quantity | 1 unit |
| Dispatch time | Usually 14–18 working days |
| Product code | EL-HM-10040 |
| Manufacturer | Jain Laboratory Instruments Pvt Ltd (JLab) — OEM |
| Country of origin | India (made in Ambala, Haryana) |
Flow Meters, Manometers and Valves
The hook gauge reads the level of a free water surface, such as the head over a notch. Across the venturimeter and orificemeter, the pressure drop at the constriction gives the discharge, while the Pitot tube gives the velocity head at one point. The inclined manometer spreads a small rise of liquid along a longer scale. Of the valves, the gate type suits full-open isolation, the globe type suits throttling, and the non-return type stops reverse flow.
Runners, Turbines and Pumps Side by Side
With the runner set, students compare impulse and reaction types in the hand: the Pelton runner takes a free jet on its buckets at high head, the Francis runner receives water radially and discharges it axially, and the Kaplan and axial flow runners pass water along the shaft at low head. The impulse turbine is supplied as a working model, while the hydraulic ram model does not run. The gear, rotary and reciprocating pumps displace a fixed volume per cycle, whereas the centrifugal, deep well turbine and submersible pumps add head through a rotating impeller.
Working Turbine, Ram and Pump Rigs
- Pelton Wheel Turbine Test Setup — tangential-flow impulse turbine rig for high heads.
- Kaplan Turbine Test Setup — low-head axial-flow runner in a scroll casing.
- Hydraulic Ram Test Setup — working ram that lifts water to a high head by water hammer.
- Submersible Pump Test Rig — submersible pump tested for head and efficiency against discharge.
More rigs are in Hydraulic Machine, part of Fluid Mechanics and Hydraulics Lab Equipment.
Request a Quote
Order through Add To Cart or write to us from the contact page with the models you want from this range, the number of each and the delivery address.
Last updated: 30 October 2026
