Submersible Pump Test Rig Manufacturer,Supplier and Exporter in India
Product Code : EL-HM-10039
Jlab Export is a leading Submersible Pump Test Rig Manufacturer,and suppliers in India
Submersible Pump Test Rig (code EL-HM-10039) is a compact, stand-alone bench for testing a 1 HP submersible pump, which circulates water between a 90 litre stainless steel supply tank and a 60 litre measuring tank with a piezometer tube and scale. Students use it to plot head and pump efficiency against discharge. This submersible pump rig is made by JLab in Ambala, India.
Specifications
| Parameter | Detail |
|---|---|
| Pump | Submersible pump, 1 HP, coupled with an electric motor |
| Supply tank | 90 litres, stainless steel |
| Measuring tank | 60 litres, stainless steel, with piezometer tube and scale |
| Gauges | Pressure gauge on the delivery side, vacuum gauge on the suction side |
| Piping | GI / PVC |
| Stop watch | Electronic |
| Control panel | With the required electrical instrumentation |
| Circulation | Closed-loop water; stainless steel tanks and wetted parts |
| Electric supply | 230 V AC ± 10 V, 50 Hz, single phase, earthed; 5 A three-pin socket with switch |
| Water supply | Tap connection ½ inch BSP; 90 litres distilled water (optional) |
| Quality check | Each test rig is visually inspected before dispatch |
| Pack quantity | Each (sold individually) |
| Minimum order quantity | 1 unit |
| Dispatch time | Usually 14–18 working days |
| Product code | EL-HM-10039 |
| Manufacturer | Jain Laboratory Instruments Pvt Ltd (JLab) — OEM |
| Country of origin | India (made in Ambala, Haryana) |
Working Out Head, Discharge and Efficiency
At each operating point, students time the rise of water against the piezometer scale with the electronic stop watch; the rise multiplied by the measuring tank’s cross-section and divided by the time gives the discharge Q. The delivery pressure gauge and the suction vacuum gauge, both converted to metres of water and added together with the height between them, give the total head H. The water power is ρgQH. Dividing it by the electrical input measured at the control panel gives the overall efficiency, and dividing that by the motor efficiency gives the pump efficiency. The two curves show how head falls as discharge rises and where the pump efficiency peaks.
Installing the Rig
Because the water stays in a closed loop between the stainless steel tanks, the rig needs only a ½ inch BSP tap connection for filling, or 90 litres of distilled water as an option. The pump runs from a 230 V, 50 Hz single-phase supply through a 5 A three-pin socket with a switch, with proper earthing and a neutral–earth voltage below 5 V. A spreadsheet sample calculation program is available on demand.
Other Pump Rigs and a Submersible Pump Model
- Jet Pump Test Setup — mono-block jet pump tested with a measuring tank and stop watch.
- Reciprocating Pump Test Setup — positive-displacement pump plotted for head and efficiency against discharge.
- Fluid Machines and Hydraulic Machines Models — model range that includes a submersible pump model.
The rig sits in Hydraulic Machine within Fluid Mechanics and Hydraulics Lab Equipment.
Request a Quote
Choose Add To Cart or use the contact page, giving the quantity, whether you want the distilled water or the spreadsheet program, and the delivery town.
Last updated: 30 October 2026
