Jet Pump Test Setup Manufacturer,Supplier and Exporter in India
Product Code : EL-HM-10038
Jlab Export is a leading Jet Pump Test Setup Manufacturer,and suppliers in India
Jet Pump Test Setup (code EL-HM-10038) is a closed-loop clear-water bench built round a 1 HP mono-block jet pump, with 32 × 25 × 25 mm suction, pressure and delivery connections. An energy meter on the control panel measures the electrical input, while the pressure and vacuum gauges, the measuring tank with piezometer tube and an electronic stopwatch supply the rest of the data for efficiency and head–discharge curves. JLab makes the jet pump rig in Ambala, India.
Specifications
| Parameter | Detail |
|---|---|
| Pump | Mono-block jet pump, 1 HP |
| Connections | 32 × 25 × 25 mm (suction × pressure × delivery) |
| Medium | Clear water |
| Supply tank | 70 litres |
| Measuring tank | 50 litres, with piezometer tube and scale |
| Gauges | Bourdon pressure gauge; pressure and vacuum gauges on delivery and suction |
| Control panel | Energy meter, MCB for overload protection, on/off switch, mains indicator |
| Tanks and wetted parts | Stainless steel |
| Piping and stopwatch | GI / PVC; electronic stopwatch |
| Electric supply | 230 ± 10 V AC, 50 Hz, single phase, earthed; 5 A three-pin socket |
| Quality check | Each pump test setup is visually inspected before dispatch |
| Pack quantity | Each (sold individually) |
| Minimum order quantity | 1 unit |
| Dispatch time | Usually 14–18 working days |
| Product code | EL-HM-10038 |
| Manufacturer | Jain Laboratory Instruments Pvt Ltd (JLab) — OEM |
| Country of origin | India (made in Ambala, Haryana) |
How a Jet Pump Lifts Water
In a jet pump, part of the water delivered by the impeller is returned through the pressure line to a nozzle. The fast jet leaving the nozzle lowers the pressure around it and entrains water from the suction line; the combined stream slows in a diffuser and passes to the impeller, which delivers it. The driving jet lets the pump draw water from a greater suction depth than a plain centrifugal pump, at the cost of lower efficiency.
Efficiency from the Energy Meter
Delivery pressure and suction vacuum give total head H, and the measuring tank and stopwatch give discharge Q, so water power is ρgQH. The energy meter gives the electrical input, from which overall efficiency follows; pump efficiency uses the shaft power instead. Head and pump efficiency are plotted against discharge over several flow rates, and a spreadsheet sample calculation program is available on demand.
Other Pump Test Setups and Rigs
- Reciprocating Pump Test Setup — double-acting piston pump in a similar closed-loop layout.
- Submersible Pump Test Rig — submersible pump performance study with gauges and a measuring tank.
- Centrifugal Pump Test Rig — centrifugal pump run at three speeds by stepped pulley drive.
Other pump rigs are in Hydraulic Machine, part of Fluid Mechanics and Hydraulics Lab Equipment.
Request a Quote
Add the rig to your enquiry with Add To Cart, or send the quantity and your delivery address from the contact page.
Last updated: 30 October 2026
