Weighing Balance Manufacturer,Supplier and Exporter in India
Product Code : EL-BL-11285
Jlab Export is a leading Weighing Balance Manufacturer,and suppliers in India
Weighing Balance (code EL-BL-11285) is a mechanical triple beam balance with a capacity of 610 g and a readability of 0.1 g, designed for weighing solids and powders in school and college laboratories. Three notched, tiered beams carry indicating sliding masses, and the range can be raised to 2610 g with supplementary masses. It is made by Jain Laboratory Instruments Pvt Ltd (JLab) at its works in Ambala, India.
Specifications
| Parameter | Detail |
|---|---|
| Type | Triple beam balance with three notched, tiered beams and centre reading |
| Capacity | 610 g |
| Extended capacity | Up to 2610 g using supplementary masses |
| Readability | 0.1 g |
| Front beam | 10 g × 0.1 g |
| Second (middle) beam | 500 g × 100 g |
| Rear beam | 100 g × 10 g |
| Sliding masses | Indicating sliding masses on each beam |
| Zero adjustment | Spring-loaded zero-adjust compensator |
| Damping | Magnetic damping, for fast setting and reading |
| Designed for | Weighing solids and powders |
| Model number | JL287/3.16 |
| Quality check | Each balance is visually inspected before dispatch |
| Pack quantity | Each (sold individually) |
| Minimum order quantity | 10 units |
| Dispatch time | Usually 7–10 working days |
| Product code | EL-BL-11285 |
| Manufacturer | Jain Laboratory Instruments Pvt Ltd (JLab) — OEM |
| Country of origin | India (made in Ambala, Haryana) |
What Is the Triple Beam Balance Used For?
A triple beam balance measures mass by comparison, so it needs no power supply and keeps working wherever it is set on a level bench. In biology and general science classes it is used to weigh salt or sugar for preparing solutions, to find the fresh and dry mass of plant material, to weigh seeds before and after soaking, and to teach how mass is measured in class 9 science. Its 0.1 g readability suits these teaching tasks; work that needs milligram resolution calls for an analytical balance instead.
To weigh, set all sliding masses to zero and turn the zero-adjust compensator until the pointer rests on the centre mark. Place the sample on the pan, move the rider on the middle beam to the highest step that keeps the pointer from dropping, then do the same on the rear beam, and finish with the front beam until the pointer is centred again. The mass is the sum of the three beam readings, and magnetic damping makes the pointer settle quickly. Weigh powders on a watch glass or a piece of weighing paper, subtract its mass, and brush the pan clean after use.
What to Specify When Ordering
- Quantity — the minimum order is 10 balances; many schools plan one per bench group.
- Supplementary masses — the range above 610 g needs them; add the separately listed mass set to the same enquiry if you need weighing up to 2610 g.
- Weighing accessories — spatulas and watch glasses for handling powders, linked below.
- Delivery — destination country, city or port, and any packing or labelling instructions for tender supplies.
Frequently Asked Questions
What is the capacity and readability of this balance?
It weighs up to 610 g on its three beams with a readability of 0.1 g. With supplementary masses, the capacity can be increased to 2610 g.
How are the three beams graduated?
As listed, the front beam reads 10 g in 0.1 g steps, the second (middle) beam 500 g in 100 g steps, and the rear beam 100 g in 10 g steps. Together they give the 610 g capacity.
Are the supplementary masses included?
They are not part of this listing. The specification says the range can be extended with supplementary masses, and JLab lists a Triple Beam Balance Mass Set separately; ask JLab to confirm that it matches this balance when you order both.
How do I zero the balance before weighing?
Move every sliding mass to its zero position with the pan empty and clean, then turn the spring-loaded zero-adjust compensator until the pointer lines up with the centre mark.
Can it weigh liquids?
Yes, in a container. The balance is designed for solids and powders, so weigh the empty beaker first, add the liquid, and subtract the two readings.
Who manufactures this balance?
Jain Laboratory Instruments Pvt Ltd, trading as JLab, builds it at its works in Ambala, Haryana, India, and quotes for it directly.
OEM Manufacturer
JLab is the trading name of Jain Laboratory Instruments Pvt Ltd, a laboratory instruments and school science equipment manufacturer in India, incorporated in 2017 and based on Hargolal Road, Ambala, Haryana. The balance is assembled at JLab’s own works rather than bought from a trader, so schools, colleges, dealers and importers deal directly with the maker, each unit is checked by eye before dispatch, and spares or repeat orders are handled by the same team. JLab exports worldwide and ships to buyers in every region — for example Ecuador in South America, Canada in North America, Sudan in North Africa, the Philippines in Southeast Asia and Oman in the Middle East. Institutions buying through tenders can see the JLab lab tenders page.
Weighing Accessories and Alternatives
- Triple Beam Balance Mass Set — the set of supplementary masses listed for raising a triple beam balance’s capacity to 2610 g.
- Triple Beam Balance (0-2610gm) — a single-pan, low-form triple beam balance listed in JLab’s science lab range.
- Spatula — stainless steel, with a flat end and a spoon end for transferring powders to the pan.
- Watch Glass — a soda-glass dish for holding small samples while they are weighed.
See all items in the Biology Lab range or the wider Biology Lab Equipment catalogue.
Request a Quote
Quotes come direct from the manufacturer. Use the Add To Cart enquiry button on this page, or send the number of balances (minimum 10 units), whether you need the supplementary mass set, and your delivery location through the contact page.
Last updated: 5 October 2026
