Home » Our Product » Mechanical Engineering Lab Equipment » Mechanical Workshop Lab Equipments » Edging Machine

Edging Machine Manufacturer,Supplier and Exporter in India

Product Code : EL-MWLE-9220
Jlab Export is a leading Edging Machine Manufacturer,and suppliers in India

This edging machine is a bench-type edge bander that puts pre-glued PVC or veneer edging onto the raw edges of panels. A hot air ventilator, electrically controlled, heats the glue on the strip. A 3-roller automatic feed presses the edging on, and the strip is then cut off at the panel ends and trimmed flush with both faces.

Specifications

Type	Edge banding machine, bench type model
Edging	Pre-glued PVC and veneer
Feed	3-roller automatic feed unit
Heating	Hot air ventilator, electrically controlled
Trimming	Edge flush trimming system with end cutting station
Also fitted	Edge trimmer and extension arms on both sides
Supplied with	Standard equipment
Minimum order quantity	1 unit
Dispatch time	Usually 14–18 working days
Manufacturer	JLab (Jain Laboratory Instruments Pvt Ltd), Ambala, India

Furniture Workshop Practice

In furniture and cabinet-making courses, students cut particle board or plywood panels to size on a Sliding Panel Saw Machine. They then band the raw edges on this machine. The class learns to set the heat for PVC and for veneer strip, feed the panel at an even pace and check the bond along the whole edge.

After trimming, the corners and arrises are eased with a Sanding Block, and any glue left on the face is pared off with a Trimming Knife. Teachers can then compare PVC edging with veneer, which can be sanded and polished along with the panel.

Frequently Asked Questions

What kind of edging does the machine use?
Pre-glued PVC and veneer edging, which are strips with a layer of heat-activated glue on the back. The hot air ventilator softens the glue just before the rollers press the strip onto the panel edge.

Does it need a separate glue pot?
No. The machine works with pre-glued edging, so the glue comes on the strip and is softened by hot air. Edging with no glue on the back needs a machine with its own glue unit.

How are the ends and faces trimmed?
The end cutting station cuts the strip off at each end of the panel. The flush trimming system then cuts the overhang level with both faces, and the edge trimmer is used for finishing.

How are long panels handled?
Extension arms on both sides support the panel as it feeds in and out. This keeps long shelves and side panels level while the edge passes the rollers and trimmers.

How should a panel edge be prepared?
The edge must be cut straight and square and be free of dust and chips, so the strip bonds along its full length. Panels cut cleanly on a panel saw usually need no further work before banding.