Magnetic Stirrer with Hot Plate Manufacturer,Supplier and Exporter in India
Product Code : EL-SLE-4630
Jlab Export is a leading Magnetic Stirrer with Hot Plate Manufacturer,and suppliers in India
Magnetic Stirrer with Hot Plate (code EL-SLE-4630) is a bench unit that mixes and heats solutions at the same time, used for chemistry experiments in school, college and general laboratories. It stirs at up to 1200 rpm, and its stirring bar is PTFE-coated so it can sit in most laboratory liquids. It is made by Jain Laboratory Instruments Pvt Ltd (JLab) at its works in Ambala, India.
Specifications
| Parameter | Detail |
|---|---|
| Function | Mixing and heating solutions for chemistry experiments |
| Maximum stirring speed | 1200 rpm |
| Stirring bar | PTFE-coated |
| Quality check | Each stirrer is visually inspected before dispatch |
| Pack quantity | Each (sold individually) |
| Minimum order quantity | 10 units |
| Dispatch time | Usually 7–10 working days |
| Product code | EL-SLE-4630 |
| Manufacturer | Jain Laboratory Instruments Pvt Ltd (JLab) — OEM |
| Country of origin | India (made in Ambala, Haryana) |
How Does It Compare with Other JLab Hot-Plate Stirrers?
| Model | Stirring speed | Other listed details |
|---|---|---|
| This stirrer (EL-SLE-4630) | Up to 1200 rpm | PTFE-coated stirring bar |
| Magnetic Stirrers with Hot Plate | Up to 1800 rpm | Up to 2 litres stirring capacity; speed and temperature controllers; stainless steel stirring plate |
| Magnetic Stirrer & Hotplate | 100–1500 rpm | Maximum 380 °C; 680 W heater; analog temperature controller |
| Magnetic Stirrer & HotPlate | Adjustable | Cast aluminium plate with sprayed surface, 165 x 165 mm |
Choose this model for routine teaching work where stirring up to 1200 rpm is enough. If your tender fixes a maximum temperature, plate size or stirring capacity, the other models state those figures in their own listings, or ask JLab to confirm them for this one.
What Is a Hot-Plate Magnetic Stirrer Used For?
A magnet turning under the plate spins the PTFE-coated bar placed in the beaker or flask, so the liquid is mixed without a paddle or glass rod, while the plate heats it. Students and technicians use it to dissolve solids, prepare solutions, keep a suspension evenly mixed, stir continuously during a titration and warm reaction mixtures. PTFE is chemically resistant and non-stick, so the bar can stay in most acids, alkalis and solvents. Flat-bottomed vessels keep the bar coupled to the magnet most reliably; start slowly and raise the speed gradually, or the bar will jump out of step. Do not heat flammable solvents on an open hot plate, remember that the plate stays hot after it is switched off, and lift the bar out with a magnet rather than fingers.
Frequently Asked Questions
What is the maximum stirring speed?
1200 rpm. Lower speeds are used for larger or more viscous volumes, and the speed is usually raised gradually so the bar stays coupled to the magnet.
What is the stirring bar coated with?
PTFE, a fluoropolymer that resists most laboratory chemicals and does not stick, which keeps the bar easy to clean.
What is the maximum temperature and plate size?
They are not stated in this listing. Ask JLab to confirm the plate temperature range, plate size and electrical rating with your quotation, especially if they are tender requirements.
How does it differ from JLab’s other hot-plate stirrers?
This model is listed with a 1200 rpm maximum speed and a PTFE-coated bar. Other listings state higher speeds, a maximum temperature, heater power or plate size, as shown in the comparison table above.
Who manufactures this magnetic stirrer?
Jain Laboratory Instruments Pvt Ltd (JLab) builds it at its works in Ambala, Haryana, India, and quotes for it directly as the manufacturer.
OEM Manufacturer
JLab is the trading name of Jain Laboratory Instruments Pvt Ltd, a laboratory instrument and equipment manufacturer in India, incorporated in 2017 and based on Hargolal Road, Ambala, Haryana. This hot-plate stirrer is built at JLab’s own works rather than sourced from a trader, so schools, colleges, dealers and importers buy it factory-direct; each unit is visually inspected before dispatch, and spare stirring bars and repeat orders come from the manufacturer. JLab exports worldwide and can ship to buyers in every region — for example Bulgaria in Eastern Europe, Chad in Central Africa, Mexico in North America, Ghana in West Africa and France in Western Europe.
Stirring and Heating Accessories
- Magnetic Stir Bar Set — cylindrical PTFE stir bars in several sizes as spares.
- Beakers — graduated borosilicate beakers with spout, flat-bottomed for magnetic stirring.
- Magnetic Stirrer — a stainless-steel-bodied stirrer for mixing when no heating is needed.
- Hotplate & Magnetic Stirrer — another JLab heating stirrer, in stainless steel with a ceramic coating.
See more teaching-lab equipment in the School Lab Equipment range.
Request a Quote
Quotes come direct from the manufacturer. Use the Add To Cart enquiry button on this page, or send the quantity (minimum 10 units), any required temperature range, plate size or supply voltage, spare stir bars, and your delivery location through the contact page.
Last updated: 4 October 2026
