Semi Automatic Mounting Press Manufacturer,Supplier and Exporter in India
Product Code : EL-SAMPFML-7354
Jlab Export is a leading Semi Automatic Mounting Press Manufacturer,and suppliers in India
Semi Automatic Mounting Press (code EL-SAMPFML-7354) is a hand-wheel hot mounting press that sets a metallographic specimen in thermoset plastic under heat and pressure, with spring-controlled pressure, a digital temperature controller and a timer. One mount takes 8–10 minutes, in three pressing sizes from 22 x 15 mm to 45 x 15 mm. JLab manufactures the press in Ambala, India.
Specifications
| Parameter | Detail |
|---|---|
| Mounting medium | Thermoset plastics, formed with the specimen under heat |
| Drive | Mechanical: hand-wheel, bevel gear pair and screw rod moving the lower die along the mould sleeve |
| Pressure | Self-adjusted by an internal spring; signal light shows the pressure level |
| Temperature control | Digital controller with real-time reading; adjustable 0–400 °C |
| Mounting time | 8–10 minutes per specimen, with timer |
| Specimen pressing sizes | 22 x 15 mm, 30 x 15 mm, 45 x 15 mm |
| Heater | 650 W, 220 V |
| Power | 220 V, 50 Hz; voltage fluctuation less than 15% |
| Overall dimensions | 340 x 270 x 400 mm |
| Weight | 25 kg (approx.) |
| Quality check | Each mounting press is visually inspected before dispatch |
| Pack quantity | Each (sold individually) |
| Minimum order quantity | 1 unit |
| Dispatch time | Usually 7–10 working days |
| Product code | EL-SAMPFML-7354 |
| Manufacturer | Jain Laboratory Instruments Pvt Ltd (JLab) — OEM |
| Country of origin | India (made in Ambala, Haryana) |
How a Specimen Is Mounted
The specimen sits on the lower die inside the mould sleeve with the thermoset plastic around it. Turning the hand-wheel rotates a pair of bevel gears that drive a screw rod, pushing the lower die up the sleeve to compress the charge while the heater brings it to temperature. The spring inside keeps the pressure self-adjusting, and a signal light shows its level.
Temperature and Timing
The digital controller shows the temperature in real time and can be set anywhere from 0 to 400 °C. The built-in timer handles the timing of each mount, which is what makes the press semi-automatic. Turning the hand-wheel back pulls the lower die down again.
Related Metallography Machines
- Automatic Mounting Press — microcomputer-controlled press with touch screen and water-forced cooling.
- Semi Automatic Polishing Machine — grinds and polishes mounts, holding up to 3 moulds of 30 or 45 mm.
- Single Disc Polishing Machine With Controller — variable-speed single-disc polisher for ground specimens.
- Monocular Upright Metallurgical Microscope — bright field upright microscope for examining polished specimens.
Find the press under Semi Automatic Mounting Press For Metallurgy Lab, part of Metallurgical Equipment.
Request a Quote
Order with Add To Cart, or use the contact page to state the specimen pressing size you need, the number of presses and the delivery city.
Last updated: 29 October 2026