Spectro Sample Polisher Manufacturer,Supplier and Exporter in India
Product Code : EL-SSPFML-7358
Jlab Export is a leading Spectro Sample Polisher Manufacturer,and suppliers in India
Spectro Sample Polisher (code EL-SSPFML-7358) is a stand-mounted grinder that puts a flat, freshly ground face on metal samples for spectrometer analysis, using a 350 mm abrasive disc on a 2 hp, 415 V three-phase motor. Air suction grips the disc on its steel plate and draws dust away as the sample is finished. JLab builds this polisher, with its fabricated stand and cast-iron disc housing, in Ambala, India.
Specifications
| Parameter | Detail |
|---|---|
| Disc motor | 2 hp or better, 2800 rpm (approx. minimum), 3 phase, 50 Hz, 415 V AC |
| Abrasive disc | 350 mm diameter |
| Disc holding | Air suction on a steel disc plate, with locking system |
| Suction motor | 1 hp minimum, 1440 rpm, 415 V AC, 50 Hz |
| Starter | Push-button DOL starter with overload prevention |
| Disc housing | Cast iron, with rear pipeline to the dust-collecting unit |
| Disc cover | Covers the disc plate over 180 degrees |
| Machine stand | Fabricated and machined; main and air-gripping motor starters fitted on it |
| Finish | Antifungal, rust-proof paint |
| Documentation | Operation and maintenance manual |
| Quality check | Each polisher is visually inspected before dispatch |
| Pack quantity | Each (sold individually) |
| Minimum order quantity | 1 unit |
| Dispatch time | Usually 14–18 working days |
| Product code | EL-SSPFML-7358 |
| Manufacturer | Jain Laboratory Instruments Pvt Ltd (JLab) — OEM |
| Country of origin | India (made in Ambala, Haryana) |
How Air Suction Holds and Cools the Disc
A separate suction unit, run by its own motor of at least 1 hp, draws air through a pipeline at the back of the disc housing. That airflow grips the abrasive disc evenly across its face, cools it during grinding and carries the dust to the collecting unit. A locking system keeps the disc in position on the steel plate, and the disc cover encloses the plate over 180 degrees.
Preparing a Face for the Spectrometer
The operator holds the cut face of the sample against the turning disc until the whole face is flat and freshly exposed. The spectrometer works on that clean, flat surface, so this job ends at the abrasive disc; the mirror polish on cloth that microscope samples need is a separate step on a metallographic polishing machine. The main and air-gripping motor starters sit on the stand, and an operation and maintenance manual comes with the machine.
Related Sample Preparation Machines
- Spectro Double Polisher Machine — double spectro polisher with a 2 HP, 2800 rpm main motor.
- Belt Polisher — endless-belt polisher that runs on a single-phase supply.
- Belt Grinder — abrasive belt grinder whose backup affects removal rate and finish.
See the Spectro Sample Polisher For Metallurgical Lab category, part of JLab’s Metallurgical Equipment range.
Request a Quote
Order through Add To Cart, or send the number of machines, your three-phase supply details and the delivery address via our contact page.
Last updated: 29 October 2026