Stretcher Trolley Manufacturer,Supplier and Exporter in India
Product Code : EL-ETC-2021
Jlab Export is a leading Stretcher Trolley Manufacturer,and suppliers in India
Unlike a lift-off stretcher, this trolley has a fixed, padded top covered in washable plastic material. The epoxy-coated steel tube frame stands on four swivelling castors, two of them braked, and carries two side rails and an IV stand. It comes in knock-down form for assembly on site, and a complete stainless steel version is also made.
Specifications
| Frame | Steel tube, epoxy powder coated |
| Top | Fixed section, upholstered, covered with washable plastic material |
| Castors | Four swivelling, two with brakes |
| Fittings | Two side rails and an IV stand |
| Construction | Knock-down |
| Option | Complete stainless steel construction |
| Size | 180 L x 60 W x 80 H cm |
| Minimum order quantity | 1 unit |
| Dispatch time | Usually 14–18 working days |
| Manufacturer | JLab (Jain Laboratory Instruments Pvt Ltd), Ambala, India |
Skills Lab Practicals with the Trolley
A wheelchair-to-trolley transfer is a common practical. Students set the brakes on a Foldable Wheelchair and on the trolley, swing the wheelchair footrests aside and help a classmate across. They then raise both side rails before moving off.
For a transport-with-drip exercise, a Multi Functional Nursing Manikin lies on the trolley with a practice bag hung on the IV stand. Students wheel it along a set route, keeping the line clear of the rails and castors. Biomedical-engineering students can strip the knock-down frame, refit it and check each joint is tight.
Frequently Asked Questions
How should the side rails be checked?
Raise each rail and push it down and outwards by hand. It should stay locked and not drop. Look for gaps where fingers can be caught as it folds, and take the trolley out of use if a rail will not latch.
What does knock-down construction mean?
The trolley is sent in parts and bolted together on site, which keeps the carton small for shipping. Tighten every bolt during assembly, and check the joints again after the first few weeks of use.
Is a stainless steel version made?
Yes. Besides the epoxy-coated steel tube model, the trolley is made in complete stainless steel construction. Say which one you need when you ask for a quote.
Why has the trolley started to squeak?
Squeaks usually come from dry castor bearings or swivels, or from a frame bolt that has worked loose. Clean hair and threads off the castors, tighten the frame joints and have the castors serviced if the noise stays.
How is the upholstered top cleaned?
The cover is washable plastic, so wipe it with the hospital’s usual disinfectant and let it dry before the next patient. Check the seams and corners for cuts, since a split lets fluid into the padding.
Other Patient Trolleys and Stretchers
- Stretcher on Trolley (lift-off stretcher)
- Emergency and Recovery Trolley (Hydraulically Operated)
- Saline Stand
For a quote, use Add To Cart or send us a message through the contact page.
Last updated: 12 November 2026
