2 Stroke 1 Cylinder Petrol Engine Manual Driven Manufacturer,Supplier and Exporter in India
Product Code : EL-IEL-10104
Jlab Export is a leading 2 Stroke 1 Cylinder Petrol Engine Manual Driven Manufacturer,and suppliers in India
2 Stroke 1 Cylinder Petrol Engine Manual Driven (code EL-IEL-10104) is a hand-turned cut section of a single-cylinder two-stroke petrol engine, opened up to show how piston and crank complete the cycle in one revolution. A flywheel is fitted, the engine is mounted on an iron frame and it can be taken apart. JLab makes this two-stroke section in Ambala, India, with a key card and working literature.
Specifications
| Parameter | Detail |
|---|---|
| Engine type | Two-stroke, single cylinder, petrol |
| Drive | Manual |
| Construction | Actual cut section showing internal details |
| Parts demonstrated | Piston and crank |
| Fitted with | Flywheel |
| Mounting | Iron frame |
| Dismantling | Dissectible for demonstration |
| Supplied with | Key card and literature on working |
| Quality check | Each engine section is visually inspected before dispatch |
| Pack quantity | Each (sold individually) |
| Minimum order quantity | 1 unit |
| Dispatch time | Usually 14–18 working days |
| Product code | EL-IEL-10104 |
| Manufacturer | Jain Laboratory Instruments Pvt Ltd (JLab) — OEM |
| Country of origin | India (made in Ambala, Haryana) |
One Power Stroke in Every Revolution
A typical small two-stroke petrol engine has no camshaft-operated valves: the piston itself opens and closes ports in the cylinder wall. As it rises, it compresses the charge above it while fresh mixture is drawn into the crankcase below, and near the top a spark ignites the charge. Driven down by the burning gas, the piston first uncovers the exhaust port and then the transfer port, through which mixture already compressed in the crankcase flows in and helps push out the remaining exhaust. The cycle therefore gives one power stroke per crankshaft revolution, against one every two revolutions in a four-stroke.
Using the Hand-Turned Section
Turning the crank by hand lets the demonstrator halt the piston anywhere in its travel and link its position to the events above, then repeat the movement as often as the class needs. Set beside a four-stroke section, it shows the trade-off of the design: more power strokes at the same speed, but exhaust and fresh charge pass through the cylinder together and mix to some extent.
Other Petrol Engine Cut Sections
- 4 Stroke 1 Cylinder Petrol Engine Manual Driven — hand-turned four-stroke petrol section for comparing the two cycles.
- Cut Section Model of Two Stroke Single Cylinder Engine (Working) — sectioned two-stroke with gear box and clutch, worked by its kicker lever.
- Fuel Supply System of A Petrol Engine — carburettor fuel system model: petrol tank, mechanical fuel pump, filter and carburettor.
Other engine cut sections appear in the I.C. Engine Lab category of Engineering Lab Equipment.
Request a Quote
Request a quotation through Add To Cart, or reach JLab on the contact page with the quantity and the address for delivery.
Last updated: 30 October 2026
