Digital Multimeter Manufacturer,Supplier and Exporter in India
Product Code : EL-PL-12575
Jlab Export is a leading Digital Multimeter Manufacturer,and suppliers in India
Digital Multimeter (code EL-PL-12575) is a meter with a 3½-digit, 27 mm LCD that measures DC voltage from 200 mV to 600 V, AC voltage on 200 V and 600 V ranges, DC current from 2000 µA to 10 A and resistance from 200 Ω to 2000 kΩ, with diode and continuity tests on the same rotary dial. It runs on a 9 V battery and is made by JLab in Ambala, India.
Specifications
| Parameter | Detail |
|---|---|
| Model | SCK962/034 |
| DC voltage | 200 mV – 600 V, 5 ranges, ±0.5% ± 2 digits |
| AC voltage | 200 / 600 V, 2 ranges, ±1.2% ± 10 digits |
| DC current | 2000 µA – 10 A, 4 ranges, ±1% ± 2 digits |
| Resistance | 200 Ω – 2000 kΩ, 5 ranges, ±0.8% ± 2 digits |
| Other tests | Diode, continuity |
| Display | 3½-digit LCD, 27 mm, maximum reading 1999 |
| Range selection | Single rotary dial |
| Power | 9 V battery |
| Quality check | Each multimeter is visually inspected before dispatch |
| Pack quantity | Each (sold individually) |
| Minimum order quantity | 5 units |
| Dispatch time | Usually 7–10 working days |
| Product code | EL-PL-12575 |
| Manufacturer | Jain Laboratory Instruments Pvt Ltd (JLab) — OEM |
| Country of origin | India (made in Ambala, Haryana) |
Picking the Right Range
A 3½-digit display reads up to 1999, so the lowest range that still covers the value gives the most significant figures. When the value is unknown, start on the highest range and step down, stopping at the last range before the display shows over-range. The accuracy figures are a percentage of the reading plus a number of counts in the last digit: ±0.5% ± 2 digits on DC volts means the final digit may be two counts out on top of the half-percent.
Connecting for Voltage, Current and Resistance
Voltage is measured with the meter across a component and current with the meter in series with it. After a current reading, turn the dial back to a voltage range; on a current range the meter has very low resistance, so placing it across a supply acts almost as a short circuit. Use the resistance, continuity and diode functions only with the circuit switched off, because the meter drives its own small test current from the battery.
Related Meters
- Voltmeter — dedicated DC voltmeter to leave connected in a circuit.
- Ammeter — moving-coil DC ammeter on a desk stand.
- Multimeter, Digital — another digital model that adds temperature, hFE and data hold.
- Semiconductors — component panels to check with the resistance and diode functions.
Other meters and circuit apparatus are in Physics Lab.
Request a Quote
Select Add To Cart to enquire, or write through the contact page with the number of meters for your benches and the delivery address.
Last updated: 26 October 2026
