Digital Rework Station Manufacturer,Supplier and Exporter in India
Product Code : EL-SADS-10477
Jlab Export is a leading Digital Rework Station Manufacturer,and suppliers in India
Digital Rework Station (code EL-SADS-10477) is a hot-air rework unit with microcontroller temperature control to ±1 °C, a pump giving up to 24 L/min and a linear air volume control. Set and read temperatures appear on an LED display, and an automatic cooling run follows switch-off. Each Digital Rework Station is made by JLab in Ambala, India.
Specifications
| Parameter | Detail |
|---|---|
| Station type | Digital hot-air rework station |
| Temperature control | Microcontroller based, accuracy ±1 °C |
| Air flow | Up to 24 L/min, linear air volume control |
| Display | LED, set and read temperature |
| Switch-off cooling | Pump runs at full air flow until the element is down to 100 °C |
| Cable | Burn-proof silicone, heat resistant up to 600 °C |
| Calibration and memory | Digital calibration; last set temperature stored |
| Static discharge | Built to prevent discharge to the printed circuit board |
| Password lock | Available for bulk customers |
| Quality check | Each rework station is visually inspected before dispatch |
| Pack quantity | Each (sold individually) |
| Minimum order quantity | 1 unit |
| Dispatch time | Usually 7–10 working days |
| Product code | EL-SADS-10477 |
| Manufacturer | Jain Laboratory Instruments Pvt Ltd (JLab) — OEM |
| Country of origin | India (made in Ambala, Haryana) |
What Happens When the Station Is Switched Off
Turning the unit OFF does not stop the air at once. The pump goes to its maximum flow of 24 L/min, whatever position the air volume control is in, and keeps running until the heating element has cooled to a safe 100 °C. The element is therefore never left hot with no air moving through it.
Using Hot Air on a Circuit Board
A rework station melts solder with a stream of heated air rather than a tip, which suits surface-mount parts whose pads must all melt together before the part can be lifted or seated. The temperature is keyed in with the increase and decrease keys; two seconds later the display returns to the read temperature. The station is built to prevent static discharge reaching the printed circuit board, and its burn-proof silicone cable is heat resistant up to 600 °C.
Other Stations, Desoldering Tools and Solder Wire
- Soldering Station — temperature-controlled soldering unit with the same ±1 °C accuracy.
- Desoldering Station — keypad-set station for clearing solder from joints.
- Desolder Pump — hand-operated ABS suction pump with a built-in tip.
- Tin Lead Solder — fluxed rosin-core solder wire for refitting parts.
The full range of Soldering and Desoldering Station products sits within Test and Measurement Equipment.
Request a Quote
Press Add To Cart or write through the contact page with the quantity, whether the password lock is wanted, and the delivery town.
Last updated: 30 October 2026
