Electric Motor Model Manufacturer,Supplier and Exporter in India
Product Code : EL-SLE-4542
Jlab Export is a leading Electric Motor Model Manufacturer,and suppliers in India
Electric Motor Model (code EL-SLE-4542) is a working demonstration motor used to explain how an electric motor operates and how it changes electrical energy into mechanical energy. It has a disc-type commutator, phosphor-bronze brushes reached through a pair of 4 mm sockets, and runs on 6–8 V DC, so it suits school and college physics labs. It is made by Jain Laboratory Instruments Pvt Ltd (JLab) at its works in Ambala, India.
Get a quote: use the Add To Cart enquiry button below, or send your quantity and destination through the contact page.
Specifications
| Parameter | Detail |
|---|---|
| Purpose | Explains the operation of an electric motor and the change of electrical energy into mechanical energy |
| Commutator | Disc-type commutator |
| Brushes | Phosphor-bronze |
| External connection | Pair of 4 mm sockets |
| Operating supply | 6–8 V DC |
| Quality check | Each motor model is visually inspected before dispatch |
| Pack quantity | Each (sold individually) |
| Minimum order quantity | 10 units |
| Dispatch time | Usually 7–10 working days |
| Product code | EL-SLE-4542 |
| Manufacturer | Jain Laboratory Instruments Pvt Ltd (JLab) — OEM |
| Country of origin | India (made in Ambala, Haryana) |
How Does It Compare with Other JLab Motor Models?
| Model | Supply | Construction details given in each listing |
|---|---|---|
| This model (EL-SLE-4542) | 6–8 V DC | Disc-type commutator; phosphor-bronze brushes; pair of 4 mm sockets |
| Demonstration Motor Model | 6–8 V DC | 2-pole armature wound with enamelled copper wire on an insulated plastic bobbin; removable permanent magnet; fully open construction; disc-type commutator; colour-coded 4 mm sockets |
| Demonstration Electric Motor | 6–8 V DC | 2-pole armature with enamelled copper wire; removable bar magnet; disc-type commutator; phosphor-bronze brushes; pair of 4 mm sockets |
| Electric Motor | 3 V and 6 V configurations | Low-voltage lab motor for driving models |
This model and the two demonstration motors share the disc-type commutator, 4 mm sockets and 6–8 V DC supply; the demonstration listings go further and describe the armature, the removable magnet and the open layout. If your lesson relies on lifting the magnet out or counting the armature poles, choose one of those, or ask JLab to confirm the same details for this model. The Electric Motor is the pick when you need a small motor to drive other models rather than a teaching model of the motor itself.
What Is the Electric Motor Model Used For?
Physics teachers use it to show the motor effect: a current-carrying coil placed in a magnetic field experiences a force, and the pair of forces on opposite sides of the coil makes it turn (the direction follows Fleming’s left-hand rule). The commutator is the key part to point out — it reverses the current in the coil every half turn, so the coil keeps rotating the same way, while the brushes carry current from the sockets onto the turning commutator. It fits secondary-school lessons on the magnetic effect of electric current, and introductory electrical courses in colleges and ITI workshops, as practical physics lab equipment for schools in India and overseas.
Run it only from a low-voltage DC source set to 6–8 V, such as a battery eliminator, connected to the 4 mm sockets with plug leads; never connect it to mains. Reversing the leads reverses the direction of rotation, which makes a quick class experiment. Keep the commutator and brushes clean and dry, switch off before adjusting anything, and do not leave the motor stalled with the supply on, as the coil will heat.
What to Specify When Ordering
- Quantity — the minimum order is 10 units, for example one per practical group.
- Power source — add a battery eliminator or other 6–8 V DC supply if your lab does not already have one.
- Leads — connecting leads with plugs to suit the 4 mm sockets.
- Delivery — destination country and port or city, preferred terms such as FOB or CIF, and any tender reference.
Frequently Asked Questions
What power supply does the Electric Motor Model need?
It operates on 6–8 V DC. A classroom battery eliminator or low-voltage DC power pack connected to the two 4 mm sockets is the usual source; it must not be connected to AC mains.
What does the disc-type commutator do?
It reverses the current in the rotating coil every half turn. Without that reversal the coil would only swing back and forth; with it, the turning force stays in one direction and the armature keeps spinning.
How is it different from the Demonstration Motor Model?
Both run on 6–8 V DC with a disc-type commutator and 4 mm sockets. The Demonstration Motor Model’s listing also describes a 2-pole armature on a plastic bobbin, a removable permanent magnet and a fully open build; this listing does not detail those parts, so ask JLab if they matter for your lesson.
Are the power supply and connecting leads included?
No, they are not part of this listing. A battery eliminator and connecting leads are separate catalogue items and can be added to the same enquiry.
What is the minimum order and dispatch time?
The minimum order is 10 units, supplied individually, and orders are usually dispatched within 7–10 working days after each model has been visually inspected. Export transit time depends on the destination.
Who manufactures this motor model?
JLab — Jain Laboratory Instruments Pvt Ltd — makes it at its works in Ambala, Haryana, and quotes for it directly.
OEM Manufacturer
Jain Laboratory Instruments Pvt Ltd, which trades as JLab, is an India-based manufacturer of physics and general science teaching apparatus, incorporated in 2017 and located on Hargolal Road, Ambala, Haryana (about the company). The motor model is built at the company’s own works and not bought in from a trader, which lets schools, colleges, dealers and importers buy direct; each unit is visually inspected before dispatch, and repeat orders and spare parts come from the same manufacturer. JLab exports worldwide and supplies buyers in all regions — Mexico in North America, Hungary in Eastern Europe, the Netherlands in Western Europe, Nigeria in West Africa and Sweden in Northern Europe are examples. For tender purchases, see the JLab lab tenders page.
Related Motor and Power Items
- Battery Eliminator (0-12 Volts) — a DC power pack for classroom experiments that can be set to the motor’s 6–8 V.
- Connecting Leads — plastic-covered leads with connectors for wiring the motor to the supply.
- Demonstration Motor Model — an open-construction motor with a removable permanent magnet.
- Demonstration Electric Motor — a 6–8 V DC model with a removable bar magnet.
- Electric Motor Model With Newton Colour Disc — a motor that spins a Newton colour disc for the light and colour lesson.
See more in the School Lab Equipment range.
Request a Quote
Quotes come direct from the manufacturer. Use the Add To Cart enquiry button on this page, or send the quantity (minimum 10 units), whether you need a power source and leads, and your delivery location through the contact page.
Last updated: 4 October 2026
