LCR Meter Manufacturer,Supplier and Exporter in India
Product Code : EL-LE-11721
Jlab Export is a leading LCR Meter Manufacturer,and suppliers in India
LCR Meter (code EL-LE-11721) is an LCR meter, model JL125/011, that measures inductance, capacitance, resistance and DC resistance at five selectable test frequencies from 100 Hz to 100 kHz, on a 20,000-count main display with a basic accuracy of ±(0.2% rdg + 2 digits). It also gives quality factor, dissipation factor and phase angle, and links to a computer over USB. JLab makes this LCR meter in Ambala, India.
Specifications
| Parameter | Detail |
|---|---|
| Model | JL125/011 |
| Test frequency | 100 Hz, 120 Hz, 1 kHz, 10 kHz, 100 kHz, selectable |
| Display | LCD; main 20,000 or 2,000 count, sub 2,000 count |
| Inductance | 20 µH to 20 kH |
| Capacitance | 20 pF to 20 mF |
| Resistance | 20 Ω to 200 MΩ |
| DC resistance | 200 Ω to 200 MΩ in 7 ranges |
| Basic accuracy | ±(0.2% rdg + 2 digits) for L, C, R and DCR |
| Q, D and phase angle | Q and D 0.000–999; phase ±90.0°, 0.1° resolution |
| Interface | USB |
| Quality check | Each LCR meter is visually inspected before dispatch |
| Pack quantity | Each (sold individually) |
| Minimum order quantity | 1 unit |
| Dispatch time | Usually 7–10 working days |
| Product code | EL-LE-11721 |
| Manufacturer | Jain Laboratory Instruments Pvt Ltd (JLab) — OEM |
| Country of origin | India (made in Ambala, Haryana) |
Measurement Modes and Controls
In Auto LCR mode the meter identifies whether the part on its terminals is an inductor, capacitor or resistor as soon as it is switched on, then measures it. The equivalent circuit can be set to series or parallel, ranges change automatically, and a 46-segment analogue bar runs beside the digits so a value can be seen settling. Max, Min, Data Hold and Zero complete the controls, with auto backlight and auto power-off.
Sorting Parts by Tolerance
Sorting mode checks each component against a chosen tolerance — ±0.1%, ±0.2%, ±0.25%, ±0.5%, ±1%, ±2%, ±5%, ±10%, ±20% or +80%/−20% — so a tray of resistors, capacitors or inductors can be passed or rejected against its marked value.
Frequently Asked Questions
Why does the test frequency matter?
Components behave differently with frequency: electrolytic capacitors are usually checked at 100 Hz or 120 Hz, while small inductors and low-value capacitors give truer readings at 10 kHz or 100 kHz.
Do the ranges change with the test frequency?
Yes. The inductance, capacitance and AC resistance ranges depend on the frequency selected, and the resolution depends on the range in use; DC resistance runs over 7 fixed ranges.
Related Component Meters
- Digital Capacitance Meter Type — dedicated digital meter for capacitance.
- LCR Impedance Circuit — circuit board for studying impedance in LCR networks.
- Multimeter Digital — general meter for quick capacitance and resistance checks.
The Lab Equipment section carries the other electrical meters.
Request a Quote
Place an order with Add To Cart or send the quantity and delivery location through the contact page.
Last updated: 25 October 2026