Mild Steel Retort Stand Manufacturer,Supplier and Exporter in India
Product Code : EL-MI-4893
Jlab Export is a leading Mild Steel Retort Stand Manufacturer,and suppliers in India
Mild Steel Retort Stand (code EL-MI-4893) is a laboratory retort stand whose rectangular base is die pressed from mild steel sheet, finished in blue powder coating and fitted with a black rubber grip, supplied with a 12 mm rod. It comes in three sizes, from a 160 x 100 mm base with a 500 mm rod to a 250 x 160 mm base with a 750 mm rod. It is made by Jain Laboratory Instruments Pvt Ltd (JLab) at its works in Ambala, India.
Specifications
| Parameter | Detail |
|---|---|
| Base | Mild steel sheet, die pressed, rectangular |
| Finish | Blue powder coating |
| Grip | Black rubber grip |
| Rod | Supplied with the stand; 12 mm diameter |
| Size — small | Base 160 x 100 mm; rod 500 mm long |
| Size — medium | Base 200 x 125 mm; rod 600 mm long |
| Size — large | Base 250 x 160 mm; rod 750 mm long |
| Quality check | Each stand is visually inspected before dispatch |
| Pack quantity | Each (sold individually) |
| Minimum order quantity | 10 units |
| Dispatch time | Usually 7–10 working days |
| Product code | EL-MI-4893 |
| Manufacturer | Jain Laboratory Instruments Pvt Ltd (JLab) — OEM |
| Country of origin | India (made in Ambala, Haryana) |
How Does It Compare with Other JLab Retort Stands?
| Model | Base | Finish | Rod and sizes (as listed) |
|---|---|---|---|
| This stand (EL-MI-4893) | Die-pressed mild steel sheet, black rubber grip | Blue powder coating | 12 mm rod; 160 x 100 mm / 500 mm, 200 x 125 mm / 600 mm, 250 x 160 mm / 750 mm |
| Iron Retort Stand | Cast iron, adjusted to stand evenly | Hammer tone | Rod supplied, tested for perpendicular mounting; sizes not stated |
| Retort Stand Base | 8 x 5 inch base, heavy or regular | Chrome plated, zinc plated or hammer tone | Rod 600 mm x 10 mm or 450 mm x 8 mm |
Choose this stand when you want stated base and rod sizes, a pressed-steel base with a rubber grip and a blue powder-coated finish. The Iron Retort Stand suits buyers who prefer a heavy cast iron base, and the Retort Stand Base offers plated or hammer-tone finishes in heavy or regular weight.
What Is the Mild Steel Retort Stand Used For?
The retort stand is the frame for most bench set-ups in school and college chemistry and physics: with boss heads and clamps it holds a burette for titration, a flask over a burner or a condenser in distillation, and with a ring it carries a filter or separating funnel. The rod length sets how high a clamp can go, so the 750 mm rod on the 250 x 160 mm base suits tall assemblies, while the 160 x 100 mm base with its 500 mm rod fits crowded student benches. The black rubber grip helps the base sit firmly on the bench; keep heavy loads over the base, and check that the rod is fixed firmly in the base before use.
What to Specify When Ordering
- Size — 160 x 100 mm with 500 mm rod, 200 x 125 mm with 600 mm rod, or 250 x 160 mm with 750 mm rod.
- Quantity — the minimum order is 10 units.
- Fittings — add boss heads, burette clamps, retort clamps and rings to the same enquiry so each bench is complete.
Frequently Asked Questions
What sizes are available?
Three, all with a 12 mm rod: a 160 x 100 mm base with a 500 mm rod, a 200 x 125 mm base with a 600 mm rod, and a 250 x 160 mm base with a 750 mm rod.
What is the base made of?
Mild steel sheet, die pressed into a rectangular base and finished with blue powder coating, with a black rubber grip.
Are clamps and boss heads included?
No. The stand is supplied with its rod; boss heads, clamps and rings are separate items, linked below.
How does it differ from the Iron Retort Stand?
The Iron Retort Stand has a hammer-tone cast iron base and no listed sizes. This stand uses a pressed mild steel base with blue powder coating and comes in three stated sizes.
What information is needed for an export quotation?
Send the size and quantity, destination country and port or city, delivery terms such as FOB or CIF, any packing or labelling requirements, and a tender reference if applicable.
Who manufactures this retort stand?
Jain Laboratory Instruments Pvt Ltd (JLab) makes it at its works in Ambala, Haryana, India, and quotes for it directly.
OEM Manufacturer
JLab is the trading name of Jain Laboratory Instruments Pvt Ltd, a manufacturer of laboratory stands, clamps and school science equipment in India, incorporated in 2017 and based on Hargolal Road, Ambala, Haryana. The stand bases are pressed and powder coated at JLab’s own works, so schools, colleges, dealers and importers buy them factory-direct, each stand is visually inspected before dispatch, and repeat orders come from the same maker. JLab exports worldwide and ships to buyers in every region — for example Angola in Central Africa, Taiwan in East Asia, Bolivia in South America, Senegal in West Africa and Croatia in Southern Europe. Tender information is on the JLab lab tenders page.
Stand Fittings
- Retort Boss Head — fixes a clamp, ring or cross rod to the stand rod.
- Mild Steel Burette Clamp — a powder-coated burette clamp with its own boss head.
- Mild Steel Retort Clamp — a chrome-plated clamp with boss head for flasks and tubes.
- Mild Steel Retort Rings — rings with boss head for separating funnels.
See the Measuring Instruments and Indian Instruments ranges.
Request a Quote
Quotes come direct from the manufacturer. Use the Add To Cart enquiry button on this page, or send the size, quantity (minimum 10 units), any clamps or rings you need and your delivery location through the contact page.
Last updated: 9 October 2026
.jpg)
