My Block Dry Bath Manufacturer,Supplier and Exporter in India
Product Code : EL-LE-8184
Jlab Export is a leading My Block Dry Bath Manufacturer,and suppliers in India
My Block Dry Bath (code EL-LE-8184) is a microprocessor-controlled digital dry bath with a transparent hinged lid, offered as single and dual block models for heating and incubating samples in tubes, PCR strips and, on the dual model, a PCR plate. It runs from ambient +5 °C to 105 °C, timed or continuously, and an optional probe can read the temperature inside a sample tube. JLab (Jain Laboratory Instruments Pvt Ltd, Ambala, India) supplies it to schools, colleges and dealers.
Specifications
| Parameter | Detail |
|---|---|
| Product series | My Block (myBlock) |
| Models | Single block and dual block |
| Controls | Microprocessor; timed or continuous operation |
| Lid | Transparent, hinged and removable; flips open to the rear or lifts off to take taller tubes |
| Universal blocks | 0.5 to 2.0 ml tubes on one side; turned over, 0.2 ml tubes, PCR strips or (dual block model only) a PCR plate |
| Other blocks | Available for tubes up to 50 ml; single and dual models can be ordered with Quick-Flip blocks |
| External temperature probe | Optional; placed inside a sample tube for real-time control and monitoring of the sample temperature |
| Temperature range | Ambient +5 °C to 105 °C |
| Temperature accuracy | ±0.3 °C |
| Temperature uniformity | ±0.2 °C |
| Temperature increments | 0.1 °C |
| Timer | Off, or 1 min to 99 h 59 min |
| Dimensions | Single: 18 x 25 x 13 cm (7 x 10 x 5 in); Dual: 16 x 36.5 x 13 cm |
| Electrical supply | 120 V or 230 V, 50–60 Hz |
| Quality check | Each dry bath is visually inspected before dispatch |
| Pack quantity | Each (sold individually) |
| Minimum order quantity | 10 units |
| Dispatch time | Usually 7–10 working days |
| Product code | EL-LE-8184 |
| Supplied by | Jain Laboratory Instruments Pvt Ltd (JLab), Ambala, India |
How Does It Compare with Other Dry Baths JLab Offers?
| Model | Listed temperature range | Listed accuracy | What sets it apart |
|---|---|---|---|
| This My Block dry bath (EL-LE-8184) | Ambient +5 to 105 °C | ±0.3 °C | Transparent lid; single or dual block; optional in-tube temperature probe; PCR plate on the dual model |
| Digital Iso Block Dry Bath | Ambient +5 to 105 °C | ±0.3 °C | Two chambers with an insulated wall, controlled independently for two temperatures at once |
| My Block Mini Digital Dry Bath | Ambient +5 to 100 °C | ±0.3 °C | Mini heat block with a heated lid; block and lid temperatures set separately |
| Dry Bath Digital | From ambient +5 °C | ±0.2 °C | Single, dual or four-block versions; blocks for tubes up to 50 ml and plates |
The My Block is the choice when you want a lidded dry bath that can read the real sample temperature through a probe, or a dual block that takes a PCR plate. For two different temperatures at the same time the Iso Block is the better fit, while the Mini Digital suits a single small block where condensation under the lid is a concern.
What Is the My Block Dry Bath Used For?
A dry bath holds sample tubes in a heated aluminium block, giving a steady temperature on the bench without a water bath. The My Block is used to heat and incubate samples in microtubes, 0.2 ml tubes, PCR strips and, on the dual model, a PCR plate, in molecular biology, biochemistry and microbiology laboratories at colleges, universities and research institutes.
Its transparent lid keeps a warm layer of air over the block, which helps temperature uniformity, reduces stratification in the block and cuts heat loss to the room. With the optional external probe placed inside a sample tube, the unit can control and display the temperature of the sample itself rather than only the block. When taller tubes are used, the lid can be flipped back or lifted off.
What to Specify When Ordering
- Model — single block or dual block (the dual model also takes a PCR plate).
- Blocks — universal flip-over blocks, Quick-Flip blocks, or blocks for larger tubes up to 50 ml.
- Options and supply — the optional external temperature probe, and 120 V or 230 V mains.
- Quantity — the number of units, plus any other dry baths or water baths to be quoted on the same enquiry.
Frequently Asked Questions
What is the My Block Dry Bath used for?
It heats and incubates samples held in tubes, PCR strips or a PCR plate at a set temperature between ambient +5 °C and 105 °C, using a heated block in place of a water bath.
What does the transparent lid do?
It holds a warm air jacket over the block, which helps uniformity, minimises temperature stratification and reduces heat loss and energy use. You can also see the samples without opening it.
What is the external temperature probe for?
The optional probe sits directly inside a sample tube, so the dry bath controls and monitors the actual sample temperature in real time.
Which tubes and plates do the blocks take?
The universal blocks take 0.5 to 2.0 ml tubes and, flipped over, 0.2 ml tubes or PCR strips; on the dual block model the flip side also takes a PCR plate. Other blocks cover tubes up to 50 ml.
How accurate is it, and does it have a timer?
Accuracy is ±0.3 °C, uniformity ±0.2 °C and the set point moves in 0.1 °C steps. The timer runs from 1 minute to 99 hours 59 minutes, or can be switched off for continuous operation.
How does it differ from the Digital Iso Block Dry Bath?
Both cover ambient +5 °C to 105 °C at ±0.3 °C. The Iso Block has two chambers with an insulated wall for running two temperatures at once, whereas the My Block has a transparent lid, an optional sample probe and a dual model that takes a PCR plate.
What should I send for an export quotation?
List the model and blocks, the quantity, the mains voltage, the destination country and port or city, the delivery terms you want (such as FOB or CIF), any packing or labelling needs and a tender reference if you have one.
Who supplies the My Block Dry Bath?
Jain Laboratory Instruments Pvt Ltd, trading as JLab, in Ambala, Haryana, India, supplies it and quotes for it together with the rest of its laboratory range.
Supplier
JLab is the trading name of Jain Laboratory Instruments Pvt Ltd, an Ambala, Haryana company incorporated in 2017 that builds laboratory equipment and also resells selected instruments such as this My Block dry bath, so laboratories can source both from one supplier. It is registered under CIN U29309HR2017PTC069123 and GSTIN 06AADCJ9848D1ZE. JLab exports worldwide and ships to every region — examples include Belgium in Western Europe, the Maldives in South Asia, Cambodia in Southeast Asia, Tanzania in East Africa and Morocco in North Africa. Tender buyers can find more on the JLab lab tenders page.
Other Dry Baths and Water Baths
- Digital Iso Block Dry Bath — two independently controlled chambers for incubating at two temperatures in one unit.
- My Block Mini Digital Dry Bath — a mini heat block with a heated lid against condensation and evaporation.
- Dry Bath Digital — single, dual or four-block dry bath with blocks for tubes up to 50 ml.
- Hot Digital Water Bath 8 Liter — an 8-litre digital water bath with a four-opening cover.
Find more instruments in Laboratory Equipment or across Laboratory Supplies.
Request a Quote
Send your enquiry with the Add To Cart button on this page or through the contact page, stating single or dual block, the blocks and probe you need, your mains voltage, the quantity and the delivery address or port.
Last updated: 15 October 2026
