Dry Bath Digital Manufacturer,Supplier and Exporter in India
Product Code : EL-LE-8181
Jlab Export is a leading Dry Bath Digital Manufacturer,and suppliers in India
Dry Bath Digital (code EL-LE-8181) is a digital dry bath, or dry block heater, that holds tubes and plates at a set temperature in machined aluminium blocks, for incubating and heating samples in university, college and research laboratories. Temperature is entered on a touchpad and held within ±0.2 °C, and a built-in timer alerts the user when an interval ends. JLab builds the single, dual and four-block versions at its Ambala works in India.
Specifications
| Parameter | Detail |
|---|---|
| Versions | Single, Dual and Four |
| Control | Digital touchpad with display; temperature entered digitally instead of by a control knob |
| Temperature setting | From ambient +5 °C, in 0.1 °C increments |
| Temperature accuracy | ±0.2 °C |
| Temperature uniformity | ±0.2 °C |
| Temperature monitoring | Real-time; maintains the selected temperature within ±0.2 °C |
| Timer | 1 to 999 minutes, built into the touchpad display; alerts the user when the set interval has timed out and does not switch off the heater |
| Blocks | High-grade aluminium; cavities machined to the conical size and shape of 0.5, 1.5, 2.0, 15 and 50 ml tubes; assorted blocks for most common laboratory tubes and plates; custom blocks on request |
| Block dimensions | 7.6 x 9.5 x 5 cm (3 x 3.75 x 2 in) |
| Block lifter | Supplied with each dry bath; temperature-insulated handle for changing blocks while they are still hot |
| Calibration | Built-in user recalibration function |
| Dimensions (w x d x h) | Single: 20 x 23 x 8 cm (7.8 x 9 x 3.2 in); Dual: 22 x 26 x 8 cm (8.7 x 10.3 x 3.2 in); Four: 22 x 35.5 x 8 cm (8.7 x 14 x 3.2 in) |
| Electrical supply | 120 V or 230 V, 50–60 Hz |
| Power | Single 350 W; Dual 600 W; Four 1000 W |
| Quality check | Each dry bath is visually inspected before dispatch |
| Pack quantity | Each (sold individually) |
| Minimum order quantity | 10 units |
| Dispatch time | Usually 7–10 working days |
| Product code | EL-LE-8181 |
| Manufacturer | Jain Laboratory Instruments Pvt Ltd (JLab) — OEM |
| Country of origin | India (made in Ambala, Haryana) |
How Does It Compare with Other Dry Baths from JLab?
| Model | Listed temperature range | Accuracy | Main listed features |
|---|---|---|---|
| This dry bath (EL-LE-8181) | From ambient +5 °C | ±0.2 °C | Single, dual or four-block units; blocks for tubes up to 50 ml and plates; 1–999 minute alert timer; block lifter; user recalibration |
| Digital Iso Block Dry Bath | Ambient +5 to 105 °C | ±0.3 °C | Two independently controlled chambers separated by an insulated wall; hinged, removable lid with a dividing wall |
| My Block Dry Bath | Ambient +5 to 105 °C | ±0.3 °C | Transparent hinged, removable lid; flip-over universal blocks for 0.5–2.0 ml tubes on one side and 0.2 ml tubes or PCR strips on the other; optional external temperature probe |
| My Block Mini Digital Dry Bath | Ambient +5 to 100 °C | ±0.3 °C | Mini heat block with a heated lid; block and lid temperatures set separately; universal voltage 100–240 V, 50 W |
Choose this dry bath when you want up to four blocks in one unit, blocks for tubes as large as 50 ml, and the tighter listed accuracy of ±0.2 °C. The Iso Block suits work that needs two temperatures at the same time, and the My Block models add a lid — transparent on the My Block, heated on the Mini Digital — that helps limit heat loss or condensation.
What Is a Digital Dry Bath Used For?
A dry bath does the work of a water bath without the water. An electrically heated aluminium block with wells shaped to the tubes passes heat straight into the samples, so there is no bath water to top up, keep clean or spill near the bench. This laboratory dry bath is used to incubate and heat samples held in tubes and plates at a steady set temperature in biochemistry, molecular biology and microbiology labs at universities, colleges and research institutes.
Because the cavities follow the conical shape of 0.5, 1.5, 2.0, 15 and 50 ml tubes, the tubes sit in close contact with the metal, which helps heat transfer. Blocks lift out with the block lifter even while hot, so one base can take different blocks for different tube sizes. The timer is an alert rather than a cut-out: when the interval ends it signals the user and the heater keeps running.
What to Specify When Ordering
- Version — Single (350 W), Dual (600 W) or Four (1000 W), depending on how many blocks you want to run.
- Blocks — the tube sizes (0.5, 1.5, 2.0, 15 or 50 ml) or plates you will use, or the details of a custom block.
- Mains supply — 120 V or 230 V, 50–60 Hz, to match your laboratory.
- Quantity and other items — the number of units, plus any water bath or other instruments to be quoted on the same enquiry.
Frequently Asked Questions
What is a digital dry bath used for?
It heats and incubates samples held in tubes or plates at a set temperature using a heated aluminium block instead of water. Labs use it where a clean, dry and steady heat source is needed at the bench.
How closely does it hold temperature?
Accuracy and uniformity are both listed as ±0.2 °C, and the set point can be changed in 0.1 °C steps. Real-time monitoring keeps the block at the selected temperature.
Which tube sizes do the blocks take?
The aluminium blocks are machined for 0.5, 1.5, 2.0, 15 and 50 ml conical tubes, and assorted blocks cover most common laboratory tubes and plates. Custom blocks can be made on request.
Does the timer switch the heater off?
No. The 1–999 minute timer alerts you when the chosen interval has timed out, but it is not designed to shut off the heater.
What versions are available?
There are Single, Dual and Four versions. They measure 20 x 23 x 8 cm, 22 x 26 x 8 cm and 22 x 35.5 x 8 cm and are rated at 350 W, 600 W and 1000 W respectively.
Can the temperature calibration be adjusted?
Yes. Every unit has a built-in user recalibration function, which helps keep the displayed temperature accurate over long-term use.
How does it differ from the Digital Iso Block Dry Bath?
The Iso Block has two chambers with separate controls, an insulated dividing wall and a lid, and is listed to 105 °C with ±0.3 °C accuracy. This dry bath runs one, two or four blocks at one set temperature, with ±0.2 °C accuracy and blocks for tubes up to 50 ml.
What should an export enquiry include?
Give the quantity, the destination country and port or city, the delivery terms you want (for example FOB or CIF), the mains voltage, any packing or labelling needs and the tender reference if there is one.
Who manufactures this dry bath?
Jain Laboratory Instruments Pvt Ltd (JLab) makes it at its works in Ambala, Haryana, India, and supplies it direct as the manufacturer.
OEM Manufacturer
Behind the JLab name is Jain Laboratory Instruments Pvt Ltd, a maker of laboratory equipment and science instruments in India, incorporated in 2017 and located on Hargolal Road, Ambala, Haryana. This digital dry bath is produced in JLab’s own works, not bought in from a trader, so research institutes, colleges, dealers and importers order it straight from the factory, and follow-up orders for extra blocks or units are handled by the same manufacturer. JLab exports worldwide and ships to every region; Togo in West Africa, Croatia in Southern Europe, the Czech Republic in Eastern Europe, France in Western Europe and the USA in North America are a few examples. For tender purchases, see the JLab lab tenders page.
Related Dry Baths and Water Baths
- Digital Iso Block Dry Bath — two independently controlled chambers, for incubating samples at two temperatures in one unit.
- My Block Dry Bath — a dry bath with a transparent hinged lid and flip-over universal blocks.
- My Block Mini Digital Dry Bath — a compact heat block with a heated lid against condensation and evaporation.
- Hot Digital Water Bath 8 Liter — an 8-litre digital water bath with a four-opening cover, for work that needs a water bath instead.
Browse the Laboratory Equipment range or the complete Laboratory Supplies section for more.
Request a Quote
Use the Add To Cart enquiry button on this page, or contact JLab through the contact page, giving the version (single, dual or four), the blocks and tube sizes you need, your mains voltage, the quantity and the delivery destination.
Last updated: 15 October 2026
