Vortex Mixer Manufacturer,Supplier and Exporter in India
Product Code : EL-LE-10651
Jlab Export is a leading Vortex Mixer Manufacturer,and suppliers in India
Vortex Mixer (code EL-LE-10651) is a bench vortex shaker with a neoprene rubber cup mounted eccentrically on the motor shaft, giving an orbital movement of 4 mm diameter at speeds from 0 to 2500 rpm. It is used to mix and resuspend samples in tubes in biology, biochemistry and chemistry laboratories, and its speed control works on 220 V AC. It is made by Jain Laboratory Instruments Pvt Ltd (JLab) at its works in Ambala, India.
Specifications
| Parameter | Detail |
|---|---|
| Type | Vortex mixer (shaker) with a neoprene rubber cup mounted eccentrically on the shaft |
| Shaking movement | Orbital |
| Orbital diameter | 4 mm |
| Speed range | 0–2500 rpm, with speed control |
| Run type | Continuous touch operation |
| Power | 60 W |
| Motor rating (input/output) | 58 W / 10 W |
| Permissible on-time | 30 minutes at 100% power |
| Electrical supply | 220 V AC |
| Quality check | Each vortex mixer is visually inspected before dispatch |
| Pack quantity | Each (sold individually) |
| Minimum order quantity | 10 units |
| Dispatch time | Usually 7–10 working days |
| Product code | EL-LE-10651 |
| Manufacturer | Jain Laboratory Instruments Pvt Ltd (JLab) — OEM |
| Country of origin | India (made in Ambala, Haryana) |
How Does It Compare with the Other JLab Vortex Mixer?
| Model | Speed range | Operation | Other listed details |
|---|---|---|---|
| This vortex mixer (EL-LE-10651) | 0–2500 rpm | Continuous touch operation | 4 mm orbit; 60 W; neoprene rubber cup; 30 minutes at 100% power; 220 V AC |
| Vortex Mixer (with vacuum suction feet) | 0–2500 rpm, variable | Touch and continuous operation | Vacuum suction feet for stability; for tubes up to 50 ml |
Both listings share the 0–2500 rpm range. Choose this model when the 4 mm orbit, 60 W rating and 30-minute full-power running time suit your work; the other listing describes vacuum suction feet and use with tubes up to 50 ml.
What Is the Vortex Mixer Used For?
When the bottom of a tube is pressed onto the rubber cup, the eccentric motion swirls the liquid into a vortex and mixes the contents within seconds. Typical uses are resuspending cell or chemical pellets, mixing reagents and samples before a reaction, and dissolving small amounts of solid in microtubes and test tubes, in school biotechnology practicals, college and university labs and research labs. The listed permissible on-time of 30 minutes at full power covers longer mixing runs as well as short pulses.
What to Specify When Ordering
- The number of vortex mixers (minimum order 10 units).
- The mains supply at the place of use; the speed control is listed for 220 V AC.
- Any centrifuges, homogenizers or stirrers to be quoted on the same enquiry as separate items.
Frequently Asked Questions
What speed and motion does this vortex mixer give?
An orbital movement of 4 mm diameter at speeds from 0 to 2500 rpm, set with the speed control.
How long can it run at full power?
The permissible on-time is listed as 30 minutes at 100% power.
What is the cup made of?
Neoprene rubber. The cup is mounted eccentrically on the shaft, which produces the orbital mixing motion.
What are its power ratings?
60 W, with a motor rating of 58 W input and 10 W output; the speed control works on 220 V AC.
How does it differ from the Vortex Mixer with vacuum suction feet?
Both run from 0 to 2500 rpm. That listing describes touch and continuous operation, vacuum suction feet and tubes up to 50 ml; this one gives the 4 mm orbit, 60 W rating, neoprene cup and 30-minute on-time.
What should an export enquiry include?
The quantity, the mains supply at the destination, the destination country and port or city, delivery terms such as FOB or CIF, and the tender reference if one applies.
Who manufactures this vortex mixer?
Jain Laboratory Instruments Pvt Ltd (JLab) makes it at its works in Ambala, Haryana, India.
OEM Manufacturer
JLab is the trading name of Jain Laboratory Instruments Pvt Ltd, a scientific laboratory equipment manufacturer in India, incorporated in 2017 and based on Hargolal Road, Ambala, Haryana. The vortex mixer is made in JLab’s own works rather than sourced from a trader, so schools, colleges, laboratories, dealers and importers buy it factory-direct; every unit is visually inspected before dispatch, and repeat orders are handled by the manufacturer. JLab exports worldwide and ships to buyers in every region — for example Eswatini in Southern Africa, Morocco in North Africa, Kenya in East Africa, Senegal in West Africa and Bhutan in South Asia. Tender information is on the JLab lab tenders page.
Mixing and Sample-Preparation Equipment
- Vortex Mixer (with vacuum suction feet) — the other JLab vortex mixer, listed for tubes up to 50 ml.
- Beadbug Microtube Homogenizer — a bead-beating homogenizer for samples too tough to break up on a vortexer.
- Hand Held Homogenizer — a rotor-stator homogenizer for disrupting biological samples.
- Refrigerated Microfuge — a refrigerated microcentrifuge for 24 tubes of 1.5–2.0 ml.
- Magnetic Stirrer (stainless steel, up to 1000 ml) — for stirring larger volumes in beakers and flasks.
Each is a separate item. More instruments are listed in the Laboratory Equipment section and the Laboratory Supplies range.
Request a Quote
Request a quotation with the Add To Cart enquiry button on this page or through the contact page, giving the number of units, the mains supply and the delivery destination.
Last updated: 15 October 2026
