Bead Blaster Microtube Homogenizer Manufacturer,Supplier and Exporter in India
Product Code : EL-LE-8250
Jlab Export is a leading Bead Blaster Microtube Homogenizer Manufacturer,and suppliers in India
Bead Blaster Microtube Homogenizer (code EL-LE-8250) is the BeadBlaster 24 bead homogenizer, which lyses, grinds and homogenizes a broad range of biological samples in up to 24 tubes of 2.0 ml at a time. Its stainless steel tube carrier moves the tubes in a high-speed 3D motion so that micro-beads strike the samples and release cellular contents. JLab (Jain Laboratory Instruments Pvt Ltd, Ambala, India) supplies it to schools, colleges and dealers.
Specifications
| Parameter | Detail |
|---|---|
| Product type | Benchtop bead homogenizer for microtubes |
| Model | BeadBlaster 24 |
| Capacity | 24 x 2.0 ml tubes |
| Motion | High-speed 3D motion of a stainless steel tube carrier |
| Speed range | 4.0 to 7.0 m/s, in 0.05 m/s increments |
| Cycle time | 1 to 90 seconds |
| Pause between cycles | 0 to 2 minutes, in 1-second increments |
| Maximum cycles per program | 10 |
| Program memory | Up to 50 programs |
| Acceleration / deceleration | Under 2 seconds each |
| Controls | Operating parameters set and displayed digitally |
| Lid | Transparent, with a mechanical lid lock that prevents opening during operation |
| Motor | Brushless, for reduced motor noise |
| Noise level | Below 68 dB |
| Dimensions | 28 x 36 x 38.5 cm (11 x 14.2 x 15.2 in) |
| Weight | 25 kg (55 lb) |
| Electrical supply | 100 to 240 V, 50–60 Hz |
| Brand | BeadBlaster |
| Quality check | Each unit is visually inspected before dispatch |
| Pack quantity | Each (sold individually) |
| Minimum order quantity | 10 units |
| Dispatch time | Usually 7–10 working days |
| Product code | EL-LE-8250 |
| Supplied by | Jain Laboratory Instruments Pvt Ltd (JLab), Ambala, India |
How Does It Compare with Other Homogenizers in the JLab Range?
| Model | How it works | Sample capacity | Other listed details |
|---|---|---|---|
| This homogenizer (EL-LE-8250) | Bead impact with high-speed 3D motion | Up to 24 x 2.0 ml tubes | 4.0–7.0 m/s; programmable cycles and pauses; up to 50 stored programs; lid lock |
| Beadbug Microtube Homogenizer | Bead impact in sealed microtubes | Up to 3 x 2.0 ml screw-cap tubes | 2,700–4,000 rpm; timer 3 s to 3 min; often within 45 seconds |
| Hand Held Homogenizer | Rotor-stator shearing with a probe | 0.1 to 250 ml, depending on probe | 130 W; 8,500–30,000 rpm; autoclavable stainless steel probes |
Choose the BeadBlaster 24 for batch work, when many tough samples must be processed together under stored, repeatable programs. The BeadBug covers smaller runs of up to three tubes, and the Hand Held Homogenizer works directly in liquid samples of up to 250 ml.
What Is the Bead Blaster Microtube Homogenizer Used For?
The instrument disrupts cells by bead beating: sample tubes containing micro-beads ride in the stainless steel carrier, and the high-speed 3D motion produces high-energy impacts between beads and sample that break cells open. Difficult and resistant samples are often homogenized in 35 seconds or less. Afterwards the tubes can be centrifuged and the supernatant collected for further processing, such as nucleic acid or protein extraction.
For fragile or heat-sensitive samples, the unit can be programmed to run shortened consecutive cycles with a rest period in between, which limits heating; up to 10 cycles can be set per program and up to 50 programs stored for repeat use. Prefilled tube kits for different sample types are offered with it, including kits of acid-washed, heat-treated zirconium beads tested to be free of nucleases for molecular biology work, and a starter kit covers a broad range of sample types. These features suit molecular biology, microbiology and biotechnology labs in universities and research institutes that prepare many samples a day.
What to Specify When Ordering
- The number of units and the main sample types you will process.
- Whether you also want prefilled bead tube kits or the starter kit, and for which sample types.
- Related instruments, such as a microtube centrifuge, to be quoted on the same enquiry.
Frequently Asked Questions
How many samples does the Bead Blaster process in one run?
Up to 24, each in a 2.0 ml tube held in the stainless steel carrier.
What speeds and cycle settings are available?
Speed is set from 4.0 to 7.0 m/s in 0.05 m/s steps. Each cycle runs for 1 to 90 seconds, pauses between cycles can be 0 to 2 minutes, and a program holds up to 10 cycles.
Can it be used with heat-sensitive samples?
Yes. It can be programmed to run shortened consecutive cycles with a rest period between them, which helps protect fragile, heat-sensitive samples.
Is the lid locked while it runs?
Yes. The transparent lid lets you watch the samples, and a mechanical lid lock prevents it from being opened during operation.
How does it differ from the Beadbug Microtube Homogenizer?
Both disrupt samples by micro-bead impact in 2 ml tubes. The Bead Blaster takes up to 24 tubes and stores up to 50 programs; the BeadBug is a compact unit for up to three tubes with a simple timer.
What electrical supply does it need?
It runs on 100 to 240 V at 50–60 Hz.
What should an export enquiry include?
The quantity, any bead kits required, the destination country and port or city, delivery terms such as FOB or CIF, packing or labelling needs, and the tender reference if there is one.
Who supplies the Bead Blaster Microtube Homogenizer?
Jain Laboratory Instruments Pvt Ltd (JLab) of Ambala, Haryana, India, supplies it and quotes for it directly.
Supplier
JLab is the trading name of Jain Laboratory Instruments Pvt Ltd, a laboratory equipment company incorporated in 2017 and located on Hargolal Road, Ambala, Haryana, India. Alongside the equipment it produces itself, JLab resells selected instruments such as this BeadBlaster homogenizer, so universities, research labs, dealers and importers can order them on the same enquiry, and each unit is visually inspected before dispatch. JLab exports worldwide and ships to buyers in every region — for example Morocco in North Africa, Sweden in Northern Europe, Colombia in South America, Namibia in Southern Africa and Kazakhstan in Central Asia. Tender buyers can find details on the JLab lab tenders page.
Related Sample-Preparation Equipment
- Beadbug Microtube Homogenizer — a compact bead homogenizer for up to three screw-cap microtubes.
- Hand Held Homogenizer — a rotor-stator homogenizer for liquid samples from 0.1 to 250 ml.
- 12 Centrifuge — a personal centrifuge with a combination rotor for microtubes and PCR strips.
- Mini Centrifuge — a palm-sized centrifuge with an eight-position microtube rotor.
Each is a separate item that can be quoted on the same enquiry. More instruments are listed in the Laboratory Equipment section of the Laboratory Supplies range.
Request a Quote
For a quotation, use the Add To Cart enquiry button on this page or the contact page, listing the number of units, any bead kits and the delivery destination.
Last updated: 15 October 2026
