Beadbug Microtube Homogenizer Manufacturer,Supplier and Exporter in India
Product Code : EL-LE-8246
Jlab Export is a leading Beadbug Microtube Homogenizer Manufacturer,and suppliers in India
Beadbug Microtube Homogenizer (code EL-LE-8246) is the BeadBug benchtop bead-beating homogenizer for cell disruption and lysis, processing up to three samples at once in disposable 2 ml screw-cap microtubes, often within 45 seconds. It was developed for samples too tough to break up on a common lab vortexer and suits low- to medium-throughput laboratories. JLab (Jain Laboratory Instruments Pvt Ltd, Ambala, India) supplies it to schools, colleges and dealers.
Specifications
| Parameter | Detail |
|---|---|
| Product type | Benchtop microtube homogenizer (bead beater) for cell disruption and lysis |
| Principle | Rapid mixing motion drives constant high-velocity impacts from hardened micro-beads chosen for the sample type |
| Capacity | 3 x 2.0 ml screw-cap, non-skirted microtubes (disposable) |
| Speed range | 2,700 to 4,000 rpm |
| Timer | 3 seconds to 3 minutes |
| Typical run | Up to three samples homogenized together, often within 45 seconds |
| Dimensions | 17 x 21 x 13.5 cm (6.9 x 8.3 x 5.3 in); footprint about 7 x 8 in |
| Weight | 2.2 kg (5 lb) |
| Brand | BeadBug |
| Quality check | Each unit is visually inspected before dispatch |
| Pack quantity | Each (sold individually) |
| Minimum order quantity | 10 units |
| Dispatch time | Usually 7–10 working days |
| Product code | EL-LE-8246 |
| Supplied by | Jain Laboratory Instruments Pvt Ltd (JLab), Ambala, India |
How Does It Compare with Other Homogenizers in the JLab Range?
| Model | How it works | Sample capacity | Other listed details |
|---|---|---|---|
| This homogenizer (EL-LE-8246) | Bead impact in sealed microtubes | Up to 3 x 2.0 ml screw-cap tubes | 2,700–4,000 rpm; timer 3 s to 3 min; compact benchtop unit |
| Bead Blaster Microtube Homogenizer | Bead impact with high-speed 3D motion | Up to 24 x 2.0 ml tubes | 4.0–7.0 m/s; programmable cycles with rest periods; up to 50 stored programs; lid lock |
| Hand Held Homogenizer | Rotor-stator shearing with a probe | 0.1 to 250 ml, depending on probe | 130 W; 8,500–30,000 rpm in six steps; autoclavable stainless steel probes |
Choose the BeadBug when a lab processes a few tough samples at a time and wants a small benchtop unit. The Bead Blaster suits larger batches of up to 24 tubes, and the Hand Held Homogenizer suits liquid samples in open tubes and vessels of up to 250 ml.
What Is the Beadbug Microtube Homogenizer Used For?
Bead beating breaks open cells by mechanical impact. The sample is sealed in a screw-cap microtube with small, hard beads, and the instrument shakes the tube so fast that the beads strike the sample over and over, rupturing cell walls and membranes and grinding tissue into a lysate. The released contents can then go on to DNA, RNA or protein extraction. Because the tube stays closed, the sample is contained during disruption.
This approach is chosen for material that a vortex mixer cannot break down — for example tough plant tissue, fungi, yeast or bacteria — in molecular biology, microbiology and biotechnology labs at colleges, universities and research institutes. With room for three tubes and a timer from 3 seconds to 3 minutes, the BeadBug fits a personal bench or a small teaching lab where only a few samples are prepared at a time.
What to Specify When Ordering
- The number of units and the sample types you will process — the micro-beads are chosen to suit the sample type.
- Whether a larger-batch unit, such as the Bead Blaster Microtube Homogenizer, would suit your throughput better.
- Related instruments, such as a vortex mixer or a mini centrifuge, to be quoted on the same enquiry.
Frequently Asked Questions
How many samples can the Beadbug process at once?
Up to three, each in a disposable 2 ml screw-cap microtube (non-skirted).
How long does homogenization take?
Often within 45 seconds. The timer can be set from 3 seconds to 3 minutes, and the speed range is 2,700 to 4,000 rpm.
Why use a bead homogenizer instead of a vortex mixer?
It was developed for samples too tough to be homogenized on a common lab vortexer. The hardened micro-beads deliver repeated high-velocity impacts, which break down material that vortex mixing alone does not.
How does it differ from the Bead Blaster Microtube Homogenizer?
Both use micro-bead impact in 2 ml tubes. The BeadBug takes up to three tubes in a compact benchtop unit, while the Bead Blaster takes up to 24 tubes and adds programmable cycles with rest periods.
What size and weight is it?
It measures 17 x 21 x 13.5 cm (6.9 x 8.3 x 5.3 in) and weighs 2.2 kg (5 lb).
What should an export enquiry include?
The quantity, the destination country and port or city, the delivery terms you prefer (for example FOB or CIF), any packing or labelling requirements, and the tender reference if the order is for a tender.
Who supplies the Beadbug Microtube Homogenizer?
Jain Laboratory Instruments Pvt Ltd (JLab), Ambala, Haryana, India, supplies it and quotes for it directly.
Supplier
JLab is the trading name of Jain Laboratory Instruments Pvt Ltd, a laboratory and science equipment company incorporated in 2017 and based on Hargolal Road, Ambala, Haryana, India. It supplies this BeadBug homogenizer alongside the laboratory equipment it produces itself, so colleges, research labs, dealers and importers can place one enquiry for both, and each unit is visually inspected before dispatch. JLab exports worldwide and ships to buyers in every region — for example Taiwan in East Asia, Indonesia in Southeast Asia, Belize in Central America and the Caribbean, New Zealand in Oceania and Qatar in the Middle East. Tender details are on the JLab lab tenders page.
Related Sample-Preparation Equipment
- Bead Blaster Microtube Homogenizer — a larger bead homogenizer for up to 24 tubes, with a transparent lid and lid lock.
- Hand Held Homogenizer — a rotor-stator homogenizer with stainless steel probes for 0.1 to 250 ml.
- Vortex Mixer (orbital, neoprene cup) — an orbital vortex shaker with a speed control, for routine tube mixing.
- Mini Centrifuge — a palm-sized personal centrifuge with an eight-position microtube rotor.
Each is a separate item that can be quoted on the same enquiry. See more in the Laboratory Equipment section of the Laboratory Supplies range.
Request a Quote
Use the Add To Cart enquiry button on this page, or the contact page, to send the number of units, your sample types and the delivery destination for a quotation.
Last updated: 15 October 2026
