Real Time Spectrum Analyzer Manufacturer,Supplier and Exporter in India
Product Code : EL-SA-10435
Jlab Export is a leading Real Time Spectrum Analyzer Manufacturer,and suppliers in India
Real Time Spectrum Analyzer (code EL-SA-10435) is a spectrum analyser covering frequencies up to 6.5 GHz that analyses a band of up to 40 MHz in real time, catching every signal that lasts 7.45 µs or longer (100% probability of intercept). Made in Ambala, India, by JLab, this analyser also includes a 6.5 GHz tracking generator.
Specifications
| Parameter | Detail |
|---|---|
| Frequency range | Up to 6.5 GHz |
| Real-time analysis bandwidth | Up to 40 MHz |
| Probability of intercept | 100% at 7.45 µs |
| Displayed average noise level | < -165 dBm (typical) |
| Minimum RBW | 1 Hz |
| Phase noise | < -108 dBc/Hz (typical) |
| Level measurement uncertainty | < 0.8 dB |
| Tracking generator | 6.5 GHz |
| Display | 10.1-inch capacitive multi-touch screen, touch gestures |
| Interfaces | USB, LAN, HDMI and others |
| Quality check | Each spectrum analyser is visually inspected before dispatch |
| Pack quantity | Each (sold individually) |
| Minimum order quantity | 1 unit |
| Dispatch time | Usually 7–10 working days |
| Product code | EL-SA-10435 |
| Manufacturer | Jain Laboratory Instruments Pvt Ltd (JLab) — OEM |
| Country of origin | India (made in Ambala, Haryana) |
Real-Time Capture Compared with a Sweep
A swept analyser shows amplitude against frequency by tuning across the span, so a short burst can occur while the sweep is elsewhere and be missed. Within its real-time bandwidth of up to 40 MHz, this analyser processes the incoming signal without gaps, so any signal lasting at least 7.45 µs is captured every time. That matters for frequency-hopping signals, channel conflicts and intermittent interference.
Spectrogram, Density Display and Mask Triggers
A spectrogram plots frequency against time, with colour showing amplitude, so hops and bursts appear as a pattern. The density display shows how often a signal occupies each point on the screen, which picks out an occasional signal hidden under a stronger one. Trigger masks start a capture when the spectrum crosses a user-defined outline, alongside the other trigger modes.
Noise Floor, Tracking Generator and EMI Detection
A resolution bandwidth down to 1 Hz lowers the noise floor and separates closely spaced signals, at the cost of slower sweeps. The tracking generator outputs a signal that follows the analyser’s tuning, so the frequency response of a device such as a filter or amplifier can be plotted. An EMC filter and quasi-peak detector serve emission (EMI) measurements; quasi-peak detection weights each signal by how often it repeats.
Other Spectrum Analysers and an RF Signal Generator
- Spectrum Analyzer — a swept analyser covering 100 kHz to 1 GHz with 100 Hz minimum RBW.
- 3.3GHz Color Spectrum Analyzer for EMI — a battery-powered portable analyser with quasi-peak and average detection.
- 6 GHz RF Signal Generator — an RF source with AM, FM and phase modulation.
All three analysers are grouped in Spectrum Analyzer, within Test and Measurement Equipment.
Request a Quote
Send the quantity, any PC software option required and the delivery address via Add To Cart or the contact page to receive a quotation.
Last updated: 30 October 2026
