• +91-85699-09696

150 MHz RF Signal Generator Manufacturer,Supplier and Exporter in India

150 MHz RF Signal Generator

Product Code : EL-SG-1545
Jlab Export is a leading 150 MHz RF Signal Generator Manufacturer,and suppliers in India

150 MHz RF Signal Generator (code EL-SG-1545) is a radio-frequency signal generator that covers 100 kHz to 150 MHz in six bands, used to test and align receivers, amplifiers and tuned circuits in communication electronics labs. It is made by Jain Laboratory Instruments Pvt Ltd (JLab) at its works in Ambala, India.

Specifications

ParameterDetail
Frequency range100 kHz to 150 MHz in six bands
Band A100 kHz – 300 kHz
Band B300 kHz – 1 MHz
Band C1 MHz – 3.2 MHz
Band D3 MHz – 10 MHz
Band E10 MHz – 35 MHz
Band F32 MHz – 150 MHz
Harmonic coverage3rd harmonic up to 450 MHz
Frequency accuracy± resolution ± 1 digit
RF output amplitude100 mVrms (at 35 MHz)
Amplitude control0 dB / 20 dB and fine tune
ModulationInternal 1 kHz; external 50 Hz – 20 kHz (at less than 1 Vrms)
Audio output1 kHz (fixed), minimum 1 Vrms
Frequency meter rangeLow frequency 10 Hz – 10 MHz; high frequency 10 MHz – 150 MHz
Frequency meter input sensitivityLess than 50 mV
Frequency meter maximum inputApprox. less than 3 Vrms
Frequency meter accuracyLow frequency 1 Hz; high frequency 10 Hz
Frequency meter input impedance (low frequency)1 MΩ
Operating temperature0 to 40 °C
Quality checkEach generator is visually inspected before dispatch
Pack quantityEach (sold individually)
Minimum order quantity10 units
Dispatch timeUsually 7–10 working days
Product codeEL-SG-1545
ManufacturerJain Laboratory Instruments Pvt Ltd (JLab) — OEM
Country of originIndia (made in Ambala, Haryana)

How Does It Compare with Other JLab RF Signal Generators?

DetailThis generator (EL-SG-1545)Rf Signal Generator 100Khz -150Mhz
BandsSix, 100 kHz – 150 MHzSix, 100 kHz – 150 MHz
Harmonic coverage3rd harmonic up to 450 MHz3rd harmonic up to 450 MHz
Frequency accuracy± resolution ± 1 digit±3%
RF output100 mVrms at 35 MHzOver 100 mVrms below 35 MHz
External modulation50 Hz – 20 kHz50 Hz – 20 kHz

The two cover the same six bands and accept the same external modulation range. The clearest difference is frequency accuracy — ± resolution ± 1 digit on this model against ±3% on the other — so this is the one to choose where the set frequency must be known closely.

What Is the RF Signal Generator Used For?

An RF signal generator supplies a known, adjustable radio-frequency signal, so that radio receivers, RF amplifiers, filters and tuned circuits can be tested, aligned and fault-found without waiting for an off-air station. The six bands of this signal generator for the electronics lab take in the intermediate frequencies used in AM and FM receivers as well as the FM broadcast band. It suits communication electronics practicals in diploma and degree courses in electronics and communication engineering, as well as service and repair training.

What to Specify When Ordering

  • Quantity — the number of generators needed.
  • Companion instruments — an oscilloscope or a separate frequency counter, which are separate items that can be quoted on the same enquiry.
  • Delivery — destination country, port or city, and preferred delivery terms.

Frequently Asked Questions

What modulation does the generator offer?
An internal 1 kHz modulating signal, and an external modulation input for signals from 50 Hz to 20 kHz at less than 1 Vrms. A fixed 1 kHz audio output of at least 1 Vrms is also available.

What can the frequency meter section measure?
Signals from 10 Hz to 10 MHz on its low-frequency range and from 10 MHz to 150 MHz on its high-frequency range, with an input sensitivity of less than 50 mV and a maximum input of approximately less than 3 Vrms.

How does it reach 450 MHz?
Through the third harmonic. Band F tops out at 150 MHz, and three times that frequency is 450 MHz, so the harmonic can be used for checks above the fundamental range.

How does it differ from the calibrated-dial 150 MHz RF Signal Generator?
Both cover 100 kHz to 150 MHz with internal and external modulation. That model sets frequency on a calibrated dial; this one specifies frequency accuracy as ± resolution ± 1 digit. Give the product code in your enquiry so the right one is quoted.

What should an export quotation request include?
The quantity, the destination country and port or city, the delivery terms you prefer (for example FOB or CIF), packing or labelling requirements and the tender reference if one applies.

Who manufactures this RF signal generator?
Jain Laboratory Instruments Pvt Ltd, trading as JLab, makes it at its works in Ambala, Haryana, India.

OEM Manufacturer

JLab is the trading name of Jain Laboratory Instruments Pvt Ltd, a manufacturer of electronic lab instruments and teaching equipment in India, incorporated in 2017 and based on Hargolal Road, Ambala, Haryana. The generator is built at JLab’s own works rather than bought from a trader, so engineering colleges, polytechnics, dealers and importers buy it from the manufacturer, each unit is visually checked before dispatch, and repeat orders are served by the same works. JLab exports worldwide and ships to buyers in every region — for example Yemen in the Middle East, Mexico in North America, Argentina in South America, Tajikistan in Central Asia and El Salvador in Central America and the Caribbean. Tender details are on the JLab lab tenders page.

Related Test and Measurement Instruments

More instruments are listed under Signal Generators, RF Signal Generator and the wider Electronics Lab Equipments range.

Request a Quote

Use the Add To Cart enquiry button or the contact page to ask for a quotation, giving the number of generators, any companion instruments and the delivery destination.

Last updated: 22 October 2026


   

Office Address

Works: 2475-84,
Hargolal Road,Ambala, Haryana

[email protected]

+91-85699-09696

Follow Us