1mHz-10MHz Function/Arbitrary Waveform Generator Manufacturer,Supplier and Exporter in India
Product Code : EL-AWG-10395
Jlab Export is a leading 1mHz-10MHz Function/Arbitrary Waveform Generator Manufacturer,and suppliers in India
1mHz-10MHz Function/Arbitrary Waveform Generator (code EL-AWG-10395) is a direct digital synthesis (DDS) generator whose sine output runs from 1 mHz (one millihertz) up to 10 MHz, with square waves and fast-edged pulses up to 4 MHz and other waveforms up to 2 MHz. A 50 MHz external frequency counter and a time mark generator are built in. The 10 MHz DDS generator is made by JLab in Ambala, India.
Specifications
| Parameter | Detail |
|---|---|
| Frequency range | 1 mHz – 10 MHz (sine) |
| Square and pulse | Up to 4 MHz, with fast rise and fall time |
| Other waveforms | Up to 2 MHz |
| Standard waveforms | Sine, square, pulse, ramp, triangle, noise, DC |
| Arbitrary waveforms | More than 25 built in; 10 bits, 100 MSa/s, 4K points |
| Amplitude range | 10 mVpp – 20 Vpp |
| Modulation and sweep | AM, FM and FSK; linear sweep (1 ms – 100 s sweep rate); burst/ASK |
| Built-in extras | Time mark generator; 50 MHz external frequency counter |
| Display | 3.5-inch TFT colour LCD |
| Interface and memory | Serial port; non-volatile storage of control panel settings |
| Quality check | Each function generator is visually inspected before dispatch |
| Pack quantity | Each (sold individually) |
| Minimum order quantity | 1 unit |
| Dispatch time | Usually 7–10 working days |
| Product code | EL-AWG-10395 |
| Manufacturer | Jain Laboratory Instruments Pvt Ltd (JLab) — OEM |
| Country of origin | India (made in Ambala, Haryana) |
Setting Up a Signal From the Front Panel
Frequency, amplitude, offset and other parameters are set with the knob or the numeric keypad, and several appear together on the colour screen. Internal modulation needs no separate modulation source, burst mode sends a user-selected number of cycles per period, and the linear sweep rate is chosen from 1 ms to 100 s. Non-volatile memory keeps the control panel settings when the unit is switched off.
Drawing Custom Waveforms on a PC
The supplied waveform-creation software builds a shape from the built-in waveforms or with pen and line tools, then downloads it to the generator, which links to the computer through a serial port. Because the output is synthesised digitally, the frequency stays stable and the sine wave has low distortion.
Frequently Asked Questions
Does the 1mHz in the name mean megahertz?
No. A lower-case m stands for milli, so 1 mHz is one millihertz, or 0.001 Hz, the slowest setting. The upper figure, 10 MHz with a capital M, is ten megahertz for sine waves.
What is the time mark generator for?
It gives marker pulses at fixed, known time intervals. Such markers are commonly used to check the time base of an oscilloscope against a reference.
Other Signal Sources and an Oscilloscope
- 25 MHz Arbitrary Function Generator with Two Channels — two-channel model with a 3.5-inch display and 160 built-in waveforms.
- Waveform Generator — touch-screen generator with 2 Mpts memory and 16-bit resolution.
- 50MHz Digital Oscilloscope — four-channel, 1 GSa/s scope to display the generator output.
This generator is filed under Arbitrary Waveform Generator, one section of Test and Measurement Equipment.
Request a Quote
Choose Add To Cart to order this 10 MHz generator, or write through the contact page with the number of units and the delivery town.
Last updated: 30 October 2026
