Acceleration Sensor Manufacturer,Supplier and Exporter in India
Product Code : EL-TWL-9192
Jlab Export is a leading Acceleration Sensor Manufacturer,and suppliers in India
This acceleration sensor measures acceleration within ±2 g from 0 to 50 Hz. Since its response starts at zero frequency, it picks up steady tilt as well as motion and slow vibration. It comes in single, dual and triple axis types, runs on 7 to 24 V DC and gives a 0.5 to 4.5 V DC or a 4–20 mA output.
Specifications
| Axis options | Single axis, dual axis, triple axis |
| Measuring range | ±2 g |
| Frequency response | 0–50 Hz |
| Operating voltage | 7–24 V DC |
| Output | Voltage 0.5 to 4.5 V DC, or current 4–20 mA |
| Operating temperature | −40 °C to +85 °C |
| Field applications | Wind farms, including offshore wind farms |
| Minimum order quantity | 5 units |
| Dispatch time | Usually 7–10 working days |
| Manufacturer | JLab (Jain Laboratory Instruments Pvt Ltd), Ambala, India |
Experiments with the Acceleration Sensor
Fixed flat on the Inclined Plane with its axis along the slope, the sensor reads the part of gravity acting down the slope, g sin θ. Students set several angles on the plane’s scale and compare each reading with the value worked out from the angle.
On a Dynamics Track Trolley pulled by a falling mass over a Bench Pulley, the single axis type shows the trolley’s acceleration during the run. With a light pulley and little friction, theory gives a = mg / (M + m), where m is the falling mass and M the trolley mass. Clamped to the frame of the Universal Vibration Apparatus, the sensor records free and forced vibrations within its 50 Hz limit.
Frequently Asked Questions
Should I choose the single, dual or triple axis type?
Pick by the motion you want to record. Single axis covers motion along one line, such as a trolley on a track. Dual axis reads tilt or motion in a plane. Triple axis records motion and vibration in all three directions at once.
Why does the sensor show 1 g when it is standing still?
Its response reaches down to 0 Hz, so it senses gravity as well as motion. With the axis pointing straight up it reads 1 g at rest, and with the axis horizontal it reads zero. Take this part away to find the acceleration due to motion alone.
Should I use the voltage or the current output?
The 0.5 to 4.5 V DC output suits a logger or meter on a short lead. The 4–20 mA output suits long cable runs and plant monitoring, since a current loop is hardly affected by the resistance of the cable.
What power supply does it need?
Any DC supply between 7 V and 24 V. A variable bench unit such as the Power Supply 0-30 Volts 3 Amp works when it is set inside that band. A 5 V USB supply is too low for this sensor.
Can it measure fast vibrations?
It responds from 0 Hz to 50 Hz. That covers swaying structures, slow machines, pendulums and trolleys. Vibration above 50 Hz is outside its response and will not be recorded properly.
Other Sensors for Motion Experiments
- Distance Sensor (infrared, analog output)
- Vernier Photogate Sensor
- Force Sensor
- Datalogger
For a quote, use Add To Cart or send us a message through the contact page.
Last updated: 6 November 2026
