Air Track Manufacturer,Supplier and Exporter in India
Product Code : EL-PL-12543
Jlab Export is a leading Air Track Manufacturer,and suppliers in India
Air Track (code EL-PL-12543) is an anodised aluminium track of triangular profile, at least 2 m long, from which air flows through two lines of small holes so that gliders ride on it almost without friction. It is used to investigate linear motion and collisions, with a millimetre rule along one side for reading positions. JLab builds the track and its accessory set in Ambala, India.
Specifications
| Parameter | Detail |
|---|---|
| Model no. | SCK828/02 |
| Material | Anodised aluminium |
| Profile | Triangular; sides at least 67 mm; wall thickness 3 mm |
| Air holes | Two lines along the track, at least 24 mm apart |
| Track length | At least 2 m |
| Working area | At least 1.90 m long and 94 mm wide |
| Scale | Millimetre rule on one side |
| Base | U-shaped, with three adjustable levelling feet |
| Gliders | 2, red, 300 g, with additional 50 g weights |
| Quality check | Each air track is visually inspected before dispatch |
| Pack quantity | Each (sold individually) |
| Minimum order quantity | 10 units |
| Dispatch time | Usually 4–6 working days |
| Product code | EL-PL-12543 |
| Manufacturer | Jain Laboratory Instruments Pvt Ltd (JLab) — OEM |
| Country of origin | India (made in Ambala, Haryana) |
What Comes With the Track
Besides the track on its base and the two gliders, the set contains spring buffers for elastic collisions, a hook-and-loop strip for inelastic collisions, three 50 mm helical springs of 1.7 N/m, two 10 cm velocity flags, two magnets for contactless impact and an English manual. The air comes from a separate blower, the Air Flow Generator below.
Experiments on the Track
Before a run, the feet are adjusted until a glider set down at rest stays still, which shows the track is level. A glider given a push then moves at almost constant velocity, a direct demonstration of Newton’s first law. Colliding the two gliders through the spring buffers, the hook-and-loop strip or the magnets lets students compare elastic, inelastic and contactless collisions and check that momentum is conserved; the 50 g weights change the mass ratio. A glider held between two helical springs oscillates, which turns the track into a simple harmonic motion experiment, and passing the 10 cm flags through photogates converts transit times into speeds.
Related Apparatus
- Air Flow Generator for Air Track — blower with hose that supplies the air cushion for the track.
- Timer with Two Photogates — infrared photogate timer for timing the velocity flags.
- Car and Ramp Lab — aluminium track and ball-bearing car for motion on a ramp.
Mechanics apparatus for these experiments is in Physics Lab.
Request a Quote
Use Add To Cart or the contact page to ask for the air track, stating the number of sets, whether the blower is wanted as well, and the delivery address.
Last updated: 26 October 2026
