Bunsen Burner with a Gas Regulator Manufacturer,Supplier and Exporter in India
Product Code : EL-SLE-4781
Jlab Export is a leading Bunsen Burner with a Gas Regulator Manufacturer,and suppliers in India
Bunsen Burner with a Gas Regulator (code EL-SLE-4781) is a brass-pipe laboratory burner with a gas regulator (stopcock) on its inlet, used where students should set the flame at the burner itself during heating and flame work in school and college labs. Its 12 mm brass chrome-plated burner tube stands on a cast iron base, with a screw-type sleeve air regulator and a jet nozzle for the air–gas mixture. It is made by Jain Laboratory Instruments Pvt Ltd (JLab) at its works in Ambala, India.
Specifications
| Parameter | Detail |
|---|---|
| Gas control | Gas regulator (stopcock) on the ribbed gas inlet, to control the flame |
| Burner tube | Brass, chrome-plated; 12 mm diameter |
| Base | Cast iron |
| Air control | Screw-type sleeve air regulator |
| Jet | Jet nozzle for regulating the air–gas mixture |
| Quality check | Each burner is visually inspected before dispatch |
| Pack quantity | Each (sold individually) |
| Minimum order quantity | 10 units |
| Dispatch time | Usually 7–10 working days |
| Product code | EL-SLE-4781 |
| Manufacturer | Jain Laboratory Instruments Pvt Ltd (JLab) — OEM |
| Country of origin | India (made in Ambala, Haryana) |
How Does It Compare with Other JLab Burners?
| Model | Gas control at the burner | Other listed details |
|---|---|---|
| This burner (EL-SLE-4781) | Gas regulator (stopcock) | 12 mm brass chrome-plated tube; cast iron base; sleeve air regulator; jet nozzle |
| Bunsen Burner (Brass Pipe) | None — set at the gas tap | Same 12 mm brass chrome-plated tube and cast iron base |
| Bunsen Burner with a Spare Jet | None — set at the gas tap | Same build, with one spare jet |
| Bunsen Burner with Flame Spreader, Spirit Lamp | Stopcock | Black-painted cast iron base; chrome-plated brass pipe; wing-shaped flame spreader top |
Choose this burner when you want flame control at the bench position without the flame spreader; pick the flame-spreader model for spreading the flame along glass tubing, and the regulator-free models where the bench gas taps are within easy reach.
What Is a Bunsen Burner with a Gas Regulator Used For?
It covers the full range of teaching-lab heating — boiling and evaporating liquids on a tripod and gauze, flame tests, sterilising inoculating loops and heating crucibles — with finer control than a plain burner. The gas regulator sets how much gas reaches the jet, so the flame can be turned down to a small, steady flame for gentle warming or opened up for strong heating, while the sleeve air regulator separately sets the mix of air: closed for a yellow luminous flame, open for a hot blue one.
Before lighting, check the burner tubing and connections, close the air sleeve and keep the regulator nearly closed, light the match first, then open the bench tap and the regulator and adjust the flame. The regulator is a flame control, not the main shut-off: at the end of the practical close the bench gas tap as well, and never leave a lit burner unattended. Specify LPG or natural gas when ordering, as the jet must suit the gas.
What to Specify When Ordering
- Gas type — LPG or natural gas.
- Quantity — the minimum order is 10 units.
- Mix of models — regulator burners for student benches, or a flame-spreader model for glass bending.
- Heating accessories — burner tubing, tripods and gauzes can be added to the same enquiry.
Frequently Asked Questions
What does the gas regulator do?
It controls the gas flow at the burner, so the flame size can be set without reaching for the bench tap. Air is adjusted separately with the screw-type sleeve.
What are the burner tube and base made of?
The 12 mm burner tube is brass, chrome-plated, and the base is cast iron.
Do I still need to use the bench gas tap?
Yes. Open the tap to supply the burner and close it at the end of the session; the regulator is for adjusting the flame, not for isolating the gas supply.
Which gas is it for?
The listing does not state the gas type. Tell JLab whether your lab uses LPG or natural gas so the jet suits your supply.
Who makes this burner?
Jain Laboratory Instruments Pvt Ltd, which trades as JLab, makes it at its works in Ambala, Haryana, India, and quotes directly as the manufacturer.
OEM Manufacturer
JLab is the trading name of Jain Laboratory Instruments Pvt Ltd, a school and college laboratory equipment manufacturer in India, incorporated in 2017 and based on Hargolal Road, Ambala, Haryana. Burners with gas regulators are built at JLab’s own works, not resold from a trader, so schools, colleges, dealers and importers get them factory-direct; each one is visually inspected before it leaves, and repeat orders and replacement parts are handled by the manufacturer. JLab exports worldwide and ships to buyers in every region — for example Colombia in South America, Bangladesh in South Asia, Mozambique in East Africa, Togo in West Africa and Turkmenistan in Central Asia. Tender information is on the JLab lab tenders page.
Related Burners and Heating Accessories
- Bunsen Burner with Flame Spreader, Spirit Lamp — a stopcock burner with a wing-shaped flame spreader top.
- Spirit Lamps — aluminium spirit lamps with lid and wick for labs without a gas supply.
- Rubber Pipe For Bunsen Burner — neoprene tubing with reinforced ends for the gas connection.
- Wire Gauze, Metallic — an iron gauze with a ceramic centre for heating glassware.
See more items in the School Lab Equipment range.
Request a Quote
Quotes come direct from the manufacturer. Use the Add To Cart enquiry button on this page, or send the quantity (minimum 10 units), your gas type and your delivery location through the contact page.
Last updated: 4 October 2026
