Centrifuge Electrical Manufacturer,Supplier and Exporter in India
Product Code : EL-SLE-4773
Jlab Export is a leading Centrifuge Electrical Manufacturer,and suppliers in India
Centrifuge Electrical (code EL-SLE-4773) is a mains-powered laboratory centrifuge used to separate solids and cells from liquids in chemistry, biology, biochemistry and clinical medicine laboratories, including school and college teaching labs. It is offered in 4-tube and 8-tube capacities, with a swing-out rotor head and a speed regulator for motor speeds from 0 to 3600 RPM on 230 V, 50 Hz single-phase AC. It is made by Jain Laboratory Instruments Pvt Ltd (JLab) at its works in Ambala, India.
Specifications
| Parameter | Detail |
|---|---|
| Type | Electrically driven laboratory centrifuge |
| Tube capacity | 4 tubes or 8 tubes (two versions) |
| Rotor | Swing-out rotor head |
| Speed control | Speed regulator, supplied as standard |
| Motor speed | 0 to 3600 RPM |
| Power supply | 230 V, single phase, 50 Hz AC |
| Quality check | Each centrifuge is visually inspected before dispatch |
| Pack quantity | Each (sold individually) |
| Minimum order quantity | 10 units |
| Dispatch time | Usually 7–10 working days |
| Product code | EL-SLE-4773 |
| Manufacturer | Jain Laboratory Instruments Pvt Ltd (JLab) — OEM |
| Country of origin | India (made in Ambala, Haryana) |
How Does It Compare with Other JLab Centrifuges?
| Model | Drive and supply | Speed | Tubes and other listed details |
|---|---|---|---|
| This centrifuge (EL-SLE-4773) | Electric, 230 V 50 Hz single phase | 0 to 3600 RPM with speed regulator | 4 or 8 tubes; swing-out rotor head |
| Centrifuge Manual (Hand Type) | Hand driven, no power needed | 1500 to 2500 RPM | 4 tubes; swing-out head; polyamide buckets; clamps to fix it to a table |
| Centrifuge | Electric, 220 V AC 50 Hz single phase | Up to 3500 RPM; built-in 5-speed regulator | Dome type; non-removable swing-out rotor; 4, 6 or 8 x 15 ml tubes |
| Laboratory Centrifuge Machine | Microprocessor based, brushless motor | Programmable speed regulator with digital speed indicator | Digital timer 0–99 minutes; electronic safety lid lock; imbalance detector |
Choose this model for teaching and routine separations where a simple regulator-controlled electric centrifuge with a 4-tube or 8-tube head is enough. The hand-type centrifuge suits rooms without power, the dome-type Centrifuge lists fixed speed steps and 15 ml tube sizes, and the microprocessor machine adds a timer, lid lock and imbalance detection for heavier use.
What Is the Electrical Centrifuge Used For?
Spinning a sample makes denser material settle far faster than it would under gravity, so a centrifuge separates a suspension into a compact pellet and a clear liquid in minutes. In chemistry teaching labs it is used to bring down precipitates in qualitative analysis so the liquid can be poured or drawn off; in biology and biochemistry it collects cells, sediment and other suspended matter; and it shows students the separation-of-mixtures principle behind processes such as separating cream from milk.
Stand the centrifuge on a firm, level bench and always load tubes in balanced pairs, opposite each other and filled to the same level. Start with the regulator at zero, raise the speed gradually, and turn it back down and let the rotor stop completely before removing tubes. Use tubes suited to the speed you run, keep hands and loose items clear of the rotor while it turns, and switch off and unplug the unit before wiping it clean.
What to Specify When Ordering
- Capacity — 4-tube or 8-tube version, and how many of each.
- Tube size — state the tube volume you plan to use so the buckets can be matched to it.
- Power supply — the listed rating is 230 V, single phase, 50 Hz; mention your local supply for export orders.
- Tubes and quantity — centrifuge tubes are separate items, and the minimum order is 10 units.
Frequently Asked Questions
What speed does this centrifuge run at?
The motor speed is 0 to 3600 RPM, set with the built-in speed regulator. Bring the speed up gradually after loading balanced tubes.
How many tubes does it hold?
It is made in two capacities, 4 tubes and 8 tubes, both with a swing-out rotor head. Say which version you need when you enquire.
Which tube size fits it?
The listing does not give a tube size, so tell JLab the tube volume you use and confirm the fit before ordering. JLab lists centrifuge tubes separately, linked below.
What power supply does it need?
230 V, single phase, 50 Hz AC. Buyers in countries with a different supply should mention it in the enquiry.
How does it differ from the hand-type centrifuge?
This model is motor driven with a 0 to 3600 RPM regulator and a 4- or 8-tube head; the hand-type model is turned by hand, holds 4 tubes and is listed at 1500 to 2500 RPM, so it is useful where there is no power supply.
Are centrifuge tubes included?
Tubes are not part of this listing. Order them as separate items in the same enquiry, matched to the tube size you need.
Who manufactures this centrifuge?
It is built by Jain Laboratory Instruments Pvt Ltd, trading as JLab, at its works in Ambala, Haryana, India, and quoted directly by the manufacturer.
OEM Manufacturer
JLab is the trading name of Jain Laboratory Instruments Pvt Ltd, a laboratory instrument manufacturer in India, incorporated in 2017 and based on Hargolal Road, Ambala, Haryana. This electric centrifuge is produced at JLab’s own works rather than bought from a trader, so schools, colleges, dealers and importers buy it factory-direct, every unit is visually inspected before it ships, and repeat orders and spares are handled by the manufacturer. JLab exports worldwide and ships to buyers in every region — for example the USA in North America, Angola in Central Africa, Moldova in Eastern Europe, Chile in South America and Sierra Leone in West Africa. For institutional purchasing, see the JLab lab tenders page.
Related Centrifuges and Tubes
- Centrifuge Manual (Hand Type) — a hand-driven 4-tube centrifuge for labs without a power supply.
- Centrifuge — a dome-type electric centrifuge with a built-in 5-speed regulator.
- Laboratory Centrifuge Machine — a microprocessor-based centrifuge with digital timer and lid lock.
- Centrifuge Tube Conical Bottom — polypropylene tubes in 15 ml and 50 ml sizes with printed graduations.
- Centrifuge Tube — 15 ml leak-proof centrifuge tubes.
See more items in the School Lab Equipment range.
Request a Quote
Quotes come direct from the manufacturer. Use the Add To Cart enquiry button on this page, or send the capacity (4 or 8 tubes), the quantity (minimum 10 units), your tube size and power supply, and your delivery location through the contact page.
Last updated: 4 October 2026
