Fire Extinguisher Manufacturer,Supplier and Exporter in India
Product Code : EL-SLE-4553
Jlab Export is a leading Fire Extinguisher Manufacturer,and suppliers in India
Fire Extinguisher (code EL-SLE-4553) is a 10 kg dry powder extinguisher, offered as a powder type or multipurpose unit, used to equip school, college and industrial laboratories against small fires. It discharges a fluidised, siliconised monoammonium phosphate powder that smothers the fire. It is made by Jain Laboratory Instruments Pvt Ltd (JLab) at its works in Ambala, India.
Get a quote: use the Add To Cart enquiry button below, or send your quantity and destination through the contact page.
Specifications
| Parameter | Detail |
|---|---|
| Type | Powder type or multipurpose |
| Extinguishing agent | Fluidised and siliconised monoammonium phosphate powder |
| Capacity | 10 kg |
| Quality check | Each extinguisher is visually inspected before dispatch |
| Pack quantity | Each (sold individually) |
| Minimum order quantity | 10 units |
| Dispatch time | Usually 7–10 working days |
| Product code | EL-SLE-4553 |
| Manufacturer | Jain Laboratory Instruments Pvt Ltd (JLab) — OEM |
| Country of origin | India (made in Ambala, Haryana) |
Where Is a Dry Powder Fire Extinguisher Used?
Laboratories combine open flames, flammable solvents and electrical equipment, so a fire extinguisher is part of every school lab setup alongside a fire blanket, first aid kit and eye wash. Monoammonium phosphate is the agent used in multipurpose (often called ABC) dry powder extinguishers, which are generally used on fires in ordinary combustibles such as paper and wood, flammable liquids and gases, and fires involving electrical equipment. Dry powder is not suitable for burning metals or for cooking-oil and fat fires, and it leaves a fine residue that has to be cleaned from benches and instruments afterwards. The fluidising and siliconising treatment keeps the powder free-flowing and resistant to moisture, so it does not cake inside the cylinder. Before relying on it for a specific risk, ask JLab for the fire ratings and the standard to which the current model is built, and follow your local fire regulations.
Mount extinguishers where they are easy to see and reach, close to exits and away from the most likely source of fire, so nobody has to pass the fire to fetch one. Train staff in the usual sequence — pull the pin, aim at the base of the fire, squeeze the handle and sweep from side to side — and remind students that their first duty is to raise the alarm and leave. Check each unit regularly for damage and an intact seal, and have it serviced and refilled after any use and at the intervals your local fire rules require.
What to Specify When Ordering
- Type — powder type or multipurpose.
- Quantity — the minimum order is 10 units; plan by lab, corridor and store room.
- Mounting and ratings — ask JLab about wall brackets and for the rating and standard details your safety officer needs.
- Other safety items — fire blankets, first aid kits and eye wash bottles can be quoted together.
Frequently Asked Questions
What powder does this fire extinguisher use?
A fluidised, siliconised monoammonium phosphate powder. Monoammonium phosphate is the agent in multipurpose dry powder extinguishers, and the treatment keeps it free-flowing.
What is its capacity?
The extinguisher holds 10 kg of powder.
Which fires can it be used on?
Multipurpose powder is generally used on fires in solids such as paper and wood, flammable liquids and gases, and electrical equipment. It is not for burning metals or cooking-oil fires. Ask JLab for the fire ratings of the current model before choosing it for a specific risk.
Where should extinguishers go in a school laboratory?
Near the exits, mounted where they are clearly visible and easy to lift down, so staff can reach one without moving towards the fire. Follow your local fire code for the number required.
Does it need maintenance?
Yes. Inspect it regularly for damage and an intact seal, and have it serviced and refilled after any use and at the intervals set by your local fire regulations.
What is the minimum order and dispatch time?
The minimum order is 10 units, sold individually, and orders usually leave within 7–10 working days after each unit is visually inspected. For export, send the destination port or city and your preferred delivery terms, such as FOB or CIF.
Who manufactures this fire extinguisher?
Jain Laboratory Instruments Pvt Ltd (JLab), at its works in Ambala, Haryana, India.
OEM Manufacturer
JLab is the trading name of Jain Laboratory Instruments Pvt Ltd, a manufacturer of laboratory equipment and lab safety items in India, incorporated in 2017 and based on Hargolal Road, Ambala, Haryana. The extinguisher is made in JLab’s own works rather than bought in from a trader, so schools, colleges, dealers and importers order it factory-direct; each unit is visually inspected before it is packed, and repeat orders are handled by the manufacturer. JLab exports worldwide and can ship to buyers in every region — for example the Maldives in South Asia, North Macedonia in Southern Europe, Mozambique in East Africa, Colombia in South America and Lesotho in Southern Africa. Tender details are on the JLab lab tenders page.
Other Lab Safety Items
- Fire Blanket — for smothering small fires, such as a burning beaker or clothing.
- First Aid Kit Box — a first aid box, in small and big sizes, to keep beside the extinguisher.
- Eye Wash Bottle — a soft eye-wash cap on a 500 ml reservoir bottle.
- Safety Goggles — impact- and splash-resistant goggles for practical work.
More items are listed in the School Lab Equipment range.
Request a Quote
Quotes come direct from the manufacturer. Use the Add To Cart enquiry button on this page, or send the type, the quantity (minimum 10 units), any other safety items and your delivery location through the contact page.
Last updated: 4 October 2026
