Centrifuge Manual (Hand Type) Manufacturer,Supplier and Exporter in India
Product Code : EL-SLE-4774
Jlab Export is a leading Centrifuge Manual (Hand Type) Manufacturer,and suppliers in India
Centrifuge Manual (Hand Type) (code EL-SLE-4774) is a hand-driven 4-tube centrifuge used to separate solids from liquids in school, college and field laboratories, with no electricity needed. It has a swing-out head with polyamide buckets, clamps to fix it to a table, and is set to give 1500 to 2500 revolutions per minute when the handle is turned. It is made by Jain Laboratory Instruments Pvt Ltd (JLab) at its works in Ambala, India.
Specifications
| Parameter | Detail |
|---|---|
| Drive | Hand driven (manual) |
| Tube capacity | 4 tubes |
| Head | Swing-out head |
| Buckets | Polyamide |
| Speed | 1500 to 2500 revolutions per minute |
| Mounting | Clamps provided to fix it to a table |
| Quality check | Each centrifuge is visually inspected before dispatch |
| Pack quantity | Each (sold individually) |
| Minimum order quantity | 10 units |
| Dispatch time | Usually 7–10 working days |
| Product code | EL-SLE-4774 |
| Manufacturer | Jain Laboratory Instruments Pvt Ltd (JLab) — OEM |
| Country of origin | India (made in Ambala, Haryana) |
How Does It Compare with Other JLab Centrifuges?
| Model | Drive | Tubes | Other listed details |
|---|---|---|---|
| This centrifuge (EL-SLE-4774) | Hand driven | 4 | Swing-out head; polyamide buckets; table clamps; 1500 to 2500 RPM |
| Hand Centrifuge (4 Tube) | Hand driven, single speed | 4 x 15 ml | Screw clamps to lock it to the bench; die-cast parts; steel pinion and worm drive |
| Hand Centrifuge Machine | Operated manually | 4 buckets | Table mounted |
| Centrifuge Electrical | Electric, 230 V 50 Hz single phase | 4 or 8 | Swing-out rotor head; speed regulator; up to 3600 RPM |
Choose this model when you want a hand centrifuge with a stated working speed range and polyamide buckets. The other hand models are listed with 15 ml tube capacity or simply as table-mounted 4-bucket units, while the electric centrifuge gives regulator control, a higher top speed and an 8-tube option where mains power is available.
What Is the Hand Centrifuge Used For?
A hand centrifuge separates a suspension into a settled pellet and a clear liquid much faster than leaving it to stand. In school and college chemistry it is used to bring down precipitates in qualitative analysis; in biology and environmental science it settles sediment from water or soil samples and other suspended matter; and because it needs no power it is practical in rural schools, field stations and rooms without bench sockets. How fast it spins depends on how quickly the handle is turned.
Clamp the centrifuge firmly to the edge of a sturdy table, load the tubes in balanced pairs opposite each other with equal volumes, and turn the handle steadily, building up speed rather than jerking it. When the run is over, stop turning and let the head slow down on its own before lifting the tubes out. Keep fingers, hair and sleeves clear of the swinging buckets, and rinse and dry the polyamide buckets if anything spills into them.
What to Specify When Ordering
- Tube size — give the tube volume you will use so the buckets suit your tubes.
- Model — this hand type, or the electric centrifuge if you have a mains supply.
- Tubes — centrifuge tubes are separate items and can be added to the same enquiry.
- Quantity — the minimum order is 10 units.
Frequently Asked Questions
How fast does the hand centrifuge spin?
It is set to give 1500 to 2500 revolutions per minute; the actual speed depends on how fast the handle is turned.
How many tubes does it take?
Four, carried in polyamide buckets on a swing-out head. Load them in balanced pairs.
Which tube size fits?
The listing does not state a tube size. Tell JLab the volume of the tubes you use and confirm the fit before ordering.
How is it fixed to the bench?
Clamps are provided to fix it to a table, which keeps it steady while the handle is turned.
When should I choose the hand type over an electric centrifuge?
Choose it where there is no reliable power supply or for simple teaching separations. The electric model runs up to 3600 RPM with a speed regulator and holds 4 or 8 tubes.
Who manufactures it?
Jain Laboratory Instruments Pvt Ltd, trading as JLab, makes this hand centrifuge at its works in Ambala, Haryana, India, and quotes for it directly.
OEM Manufacturer
JLab is the trading name of Jain Laboratory Instruments Pvt Ltd, a maker of school and college laboratory equipment in India, incorporated in 2017 and based on Hargolal Road, Ambala, Haryana. The hand centrifuge is made at JLab’s own works and not bought in from a trader, so schools, colleges, dealers and importers get it straight from the factory, each unit is visually checked before dispatch, and repeat orders are handled by the manufacturer. JLab exports worldwide and ships to buyers in every region — for example Sweden in Northern Europe, Qatar in the Middle East, Morocco in North Africa, Taiwan in East Asia and Guatemala in Central America and the Caribbean.
Related Centrifuges and Tubes
- Centrifuge Electrical — the mains-powered option with 4- or 8-tube capacity and a speed regulator.
- Hand Centrifuge (4 Tube) — a single-speed hand centrifuge with worm drive for 15 ml tubes.
- Hand Centrifuge Machine — a table-mounted manual centrifuge with 4 buckets.
- Centrifuge Tube Conical Bottom — graduated polypropylene centrifuge tubes.
- Centrifuge Tube — leak-proof 15 ml centrifuge tubes.
See more items in the School Lab Equipment range.
Request a Quote
Quotes come direct from the manufacturer. Use the Add To Cart enquiry button on this page, or send the quantity (minimum 10 units), your tube size, any tubes you need and your delivery location through the contact page.
Last updated: 4 October 2026
