Conductivity Meter Manufacturer,Supplier and Exporter in India
Product Code : EL-CLE-11074
Jlab Export is a leading Conductivity Meter Manufacturer,and suppliers in India
Conductivity Meter (code EL-CLE-11074) is a portable, battery-powered meter with a remote probe that measures the electrical conductivity of solutions on two ranges, 1.999 mS and 19.99 mS, with an accuracy of ±(3% F.S. + 1 digit) (model JL249). The reading refreshes about every 0.4 seconds on an LCD that stays clear in bright light. JLab builds it in Ambala, India, and ships it with standard electrodes and accessories.
Specifications
| Parameter | Detail |
|---|---|
| Model | JL249 |
| Measuring ranges | 1.999 mS and 19.99 mS |
| Resolution | 0.001 mS on the 1.999 mS range; 0.01 mS on the 19.99 mS range |
| Accuracy | ±(3% F.S. + 1 d) |
| Sampling time | Approx. 0.4 s |
| Display | LCD |
| Probe | Remote probe |
| Housing | ABS plastic, water-resistant front panel, rubber keys |
| Power supply | 9 V battery, built-in low battery indicator |
| Supplied with | Standard electrodes and accessories |
| Quality check | Each meter is visually inspected before dispatch |
| Pack quantity | Each (sold individually) |
| Minimum order quantity | 5 units |
| Dispatch time | Usually 7–10 working days |
| Product code | EL-CLE-11074 |
| Manufacturer | Jain Laboratory Instruments Pvt Ltd (JLab) — OEM |
| Country of origin | India (made in Ambala, Haryana) |
Choosing the Range
Start on the 19.99 mS range, which reads to 0.01 mS. If the value falls below 1.999 mS, switch to the lower range for a resolution of 0.001 mS, the better choice for tap water, rainwater and dilute solutions. Rinse the probe with distilled water between samples so one solution does not carry over into the next, and compare samples at the same temperature, because conductivity rises as a solution warms.
Where It Is Used
Conductivity depends on the ions dissolved in a sample, so the meter shows the difference between strong and weak electrolytes, follows the end point of a conductometric titration and checks water from a still or deioniser. The ABS case, water-resistant front panel and rubber keys suit sampling away from the bench, and the low battery indicator warns when the 9 V battery needs changing.
Related Water Testing Items
- pH Meter — measures the acidity of the same samples.
- Microprocessor Conductivity/TDS Meter — adds total dissolved solids readings.
- Wash Bottle — for rinsing the probe with distilled water.
Other meters and bench instruments sit in Chemistry Lab Equipment, one of the groups in the chemistry equipment section.
Request a Quote
Use Add To Cart or the contact page to send the number of meters, any spare electrodes you want and your delivery location.
Last updated: 25 October 2026
