Equipment For Studying Centrifugal Force Manufacturer,Supplier and Exporter in India
Product Code : EL-TWL-9177
Jlab Export is a leading Equipment For Studying Centrifugal Force Manufacturer,and suppliers in India
This rig measures the force needed to keep a mass moving in a circle. A low-friction truck runs on a 40 cm rail turned by a 24 V geared motor. An inextensible wire over a pulley links the truck to a force sensor. Students change the mass, the radius and the speed, and test F = m ω² r.
Specifications
| Rail | 40 cm, with graduated scale |
| Truck | Low friction, with weight holder |
| Weights | 10 g and 50 g |
| Drive | Geared DC motor, 24 V, 170 rpm, variable speed |
| Force link | Inextensible wire over a pulley to a force sensor |
| Sensor supports | For a photogate sensor and a force sensor |
| Guard | Polycarbonate safety protection |
| Base | 64 x 30 cm |
| Minimum order quantity | 1 unit |
| Dispatch time | Usually 7–10 working days |
| Manufacturer | JLab (Jain Laboratory Instruments Pvt Ltd), Ambala, India |
Centripetal Force Experiments for Students
Three runs make up the usual practical. First the radius and speed stay fixed while the truck carries the 10 g and 50 g loads, and the force rises in step with the mass. Next the truck is set at different radii read on the graduated rail. Last, the motor speed is changed and the force is plotted against ω², which gives a straight line.
The force sensor and the photogate sensor connect to a Datalogger, which records force and rotation speed together. Before a run, students can hang a known load from the wire with Hangers with Slotted Weights to check the force reading. A simpler, hand-turned version of the same study is the Centripetal Force apparatus.
Frequently Asked Questions
Is the force measured centrifugal or centripetal?
In the turning frame the truck seems to be pushed outwards by a centrifugal force. Seen from the bench, the wire pulls the truck inwards with a centripetal force of m ω² r. The sensor reads that wire tension, which has the same size in both descriptions.
How is the rotation speed measured?
A photogate sensor on its support detects the turning rail and passes the timing to a datalogger. The period of one turn gives ω = 2π / T, which goes into F = m ω² r.
What protects students while it turns?
A polycarbonate guard covers the turning rail, and the system has mechanical protection. Keep the guard in place, start at low speed and stop the motor before changing the masses.
How does it differ from the rotational motion set?
This rig is built only for circular-motion force, with a force sensor on the wire and a graduated rail. The Equipment For Studying Rotational Motion covers moment of inertia and angular momentum with a disk and ring, and has centrifugal force accessories.
What loads come with the truck?
Weights of 10 g and 50 g fit the weight holder on the truck. Changing them while the radius and speed stay fixed shows that the force is proportional to the moving mass.
Other Sensors and Rotation Apparatus
- Force Sensor (analog output, up to 3 kg)
- Timer with Two Photogates
- Precision Gyroscope
For a quote, use Add To Cart or send us a message through the contact page.
Last updated: 6 November 2026
