Halogen Moisture Balance Manufacturer,Supplier and Exporter in India
Product Code : EL-CE-6150
Jlab Export is a leading Halogen Moisture Balance Manufacturer,and suppliers in India
Halogen Moisture Balance (code EL-CE-6150) is a laboratory moisture analyser that dries a sample under a halogen lamp while an E.M.F.C. weighing system follows the loss in mass, so the moisture content can be read directly. Results appear on an easy-to-read VFD display. JLab manufactures this moisture balance in Ambala, India, as part of its chemistry equipment line.
Specifications
| Parameter | Detail |
|---|---|
| Capacity | 100 g / 50 g |
| Readability | 0.01% (1 mg) / 0.1 mg |
| Weighing technology | E.M.F.C. (electromagnetic force compensation) |
| Heating | Halogen heating system (halogen lamp) |
| Temperature range | 50 °C to 200 °C |
| Testing modes | Automatic, timing, manual |
| Time setting | 1–120 min, in 1 min steps |
| Display | Easy-to-read VFD showing % moisture, time, temperature and weight |
| Pan size | 90 mm diameter |
| Tare range | Full |
| Interface and data output | Standard RS 232 C |
| Operating temperature | 10 °C to 40 °C |
| Housing dimensions | 350 x 200 x 260 mm |
| Weight | Approx. 7.5 kg |
| Power supply | AC adaptor, 220 V, 50–60 Hz |
| Quality check | Each balance is visually inspected before dispatch |
| Pack quantity | Each (sold individually) |
| Minimum order quantity | 10 units |
| Dispatch time | Usually 7–10 working days |
| Product code | EL-CE-6150 |
| Manufacturer | Jain Laboratory Instruments Pvt Ltd (JLab) — OEM |
| Country of origin | India (made in Ambala, Haryana) |
How Does It Compare with Other JLab Moisture Balances?
| Model | Heat source | Sample size or capacity | Other details |
|---|---|---|---|
| This balance (EL-CE-6150) | Halogen lamp, 50–200 °C | 100 g / 50 g capacity | Automatic, timing and manual test modes |
| Infra Red Moisture Balance | 250 W infrared lamp | Samples from 5 to 25 g | For materials that do not change chemically under infrared radiation; used for paper |
| Accurate Moisture Measurement | Mid-wave infrared quartz heater | 90 mm sample pan; measures down to 0.001 g | Rapid and slow drying modes; backlit LCD; vaporisation rate shown on a graph |
All three dry a sample by heating it and measure the moisture it loses; the main difference is the heat source — a halogen lamp here, an infrared lamp or a mid-wave infrared quartz heater on the other two.
What Is the Halogen Moisture Balance Used For?
It applies the loss-on-drying method: the sample is weighed, heated until its moisture has been driven off, and the fall in mass is reported as percentage moisture. Laboratories use this kind of moisture analyser to check the water content of samples such as powders, granules and grains faster than an oven-drying test, and the result is meaningful only when the sample loses water rather than decomposing at the chosen temperature.
What to Specify When Ordering
- Capacity — the 100 g or the 50 g version.
- Quantity — how many balances are needed.
- Other items — balances or weighing bottles from the links below are separate items that can join the same enquiry.
Frequently Asked Questions
What testing modes does it have?
Automatic, timing and manual. In timing mode the test runs for a set time between 1 and 120 minutes, adjustable in 1-minute steps.
What drying temperatures does it cover?
The temperature range is 50 °C to 200 °C.
What does the display show during a test?
Percentage moisture, elapsed time, temperature and weight.
Why use halogen heating?
A halogen lamp reaches its working temperature quickly, which shortens drying times compared with slower-heating methods such as a drying oven.
Can results be exported?
Yes, through the standard RS 232 C interface for data output.
What should an export enquiry state?
The capacity and number of units, the destination country and port or city, the delivery terms you prefer (for example FOB or CIF), any packing or labelling instructions and, for a tender, its reference.
Who manufactures the Halogen Moisture Balance?
JLab (Jain Laboratory Instruments Pvt Ltd) builds it in Ambala, Haryana, and supplies it to buyers directly.
OEM Manufacturer
JLab is the trading name of Jain Laboratory Instruments Pvt Ltd, a manufacturer of moisture balances, electronic balances and chemistry lab equipment in India, incorporated in 2017 and based on Hargolal Road, Ambala, Haryana. The moisture balance is produced in JLab’s own works rather than sourced from a trader, so laboratories, colleges, dealers and importers can order it factory-direct and go back to the same maker for spares and repeat units. JLab exports worldwide and ships to buyers in every region — Finland in Northern Europe, Gambia in West Africa, New Zealand in Oceania, Cyprus in Southern Europe and Congo in Central Africa are some examples. Tender details are on the JLab lab tenders page.
Related Moisture and Weighing Equipment
- Infra Red Moisture Balance — a digital moisture balance heated by a 250 W infrared lamp.
- Accurate Moisture Measurement — a moisture analyser with a mid-wave infrared quartz heater and rapid or slow drying modes.
- High Precision Balance — an electronic balance reading to 0.001 g.
- Weighing Bottle — a stoppered borosilicate glass bottle, the usual vessel for oven loss-on-drying tests.
See the complete Chemistry Equipment range, or browse JLab’s Chemistry Lab Equipment.
Request a Quote
Press Add To Cart on this page to raise an enquiry, or write via the contact page with the capacity, the number of units and the delivery destination.
Last updated: 24 October 2026
