• +91-85699-09696

Magnetic Stirrer Cum Hot Plate Manufacturer,Supplier and Exporter in India

Magnetic Stirrer Cum Hot Plate

Product Code : EL-HPWT-3992
Jlab Export is a leading Magnetic Stirrer Cum Hot Plate Manufacturer,and suppliers in India

On this unit one stainless steel top plate does two jobs. A simmerstat sets how hard the plate heats, and a PMDC motor underneath turns the stirring bar at up to 1200 rpm on a stepless speed control. The body is powder-coated CRC sheet. Two sizes are made: 2.0 litres on a 6 x 6 inch plate and 5.0 litres on an 8 x 8 inch plate.

Specifications

BodyCRC sheet, powder coated
Top plateStainless steel
MotorPMDC (permanent magnet DC)
SpeedUp to 1200 rpm, stepless control
Heat controlSimmerstat
Models2.0 litres with 6 x 6 inch plate; 5.0 litres with 8 x 8 inch plate
Power supply220/230 V AC
Minimum order quantity1 unit
Dispatch timeUsually 7–10 working days
ManufacturerJLab (Jain Laboratory Instruments Pvt Ltd), Ambala, India

Warm Titrations and Solution Practicals

Oxalic acid is titrated with Potassium Permanganate only when warm, because the reaction is slow in the cold. Students warm the Oxalic Acid solution with dilute sulphuric acid in a conical flask on the plate, keep it stirring and run in the permanganate. A faint pink that stays marks the end point.

The same plate is used to make starch indicator for iodine titrations. A paste of Starch Powder Water Soluble is stirred into hot water, and the bar keeps it from settling and forming lumps while it clears.

Frequently Asked Questions

What does a simmerstat do?
It switches the heater on and off in a repeating cycle, and the knob sets how long it stays on in each cycle. It has no sensor in the liquid, so check the solution with a thermometer when the temperature matters.

Why is a PMDC motor used for the stirring?
A permanent magnet DC motor gives strong torque from the moment it starts. The bar therefore begins turning smoothly at low speed instead of jerking, and the stepless control lets you raise the speed gradually.

Can I titrate on the plate while it heats?
Yes. Clamp the burette above the flask and keep the solution stirring at a low speed. Turn the simmerstat down once the liquid is warm enough, so it stays warm without boiling during the titration.

How do I clean the stainless steel top plate?
Let it cool, then wipe it with a damp cloth and a mild detergent and dry it. Wipe up spilt acid or salt solution at once, and avoid scouring powders that scratch the steel.

Other Hot Plates and Stirrers

For a quote, use Add To Cart or send us a message through the contact page.

Last updated: 12 November 2026


   

Office Address

Works: 2475-84,
Hargolal Road,Ambala, Haryana

[email protected]

+91-85699-09696

Follow Us