Magnetic Stirrer Manufacturer,Supplier and Exporter in India
Product Code : EL-HPWT-3989
Jlab Export is a leading Magnetic Stirrer Manufacturer,and suppliers in India
This magnetic stirrer range covers stirring volumes from 500 ml up to 50 litres. Every model turns a PTFE-coated paddle inside the vessel with a magnet under the top. It can be made with or without a hot plate. Heated models carry 500 W to 5 kW heaters, controlled by an energy regulator or a PID digital microprocessor controller.
Specifications
| Stirring capacity | 500 ml to 50 litres |
| Heater (hot plate models) | 500 W to 5 kW |
| Heat control | Energy regulator or PID digital microprocessor controller |
| Dimensions (W x D x H) | 190 x 190 x 170 mm, larger for higher capacities |
| Stirring paddles | PTFE coated, various sizes |
| Versions | With or without hot plate, digital, LED display, multi-station, ceramic coated |
| Minimum order quantity | 1 unit |
| Dispatch time | Usually 7–10 working days |
| Manufacturer | JLab (Jain Laboratory Instruments Pvt Ltd), Ambala, India |
Titration Practicals on the Stirrer
In the standard acid and base practical, students standardise Sodium Hydroxide solution against a weighed standard of oxalic acid. The flask sits on the stirrer under a Burette, and the turning paddle mixes each drop at once. With Phenolphthalein as indicator, the end point is the first pale pink that lasts.
For a conductometric titration, the cell of a Digital Conductivity Meter dips into a beaker of dilute acid on the stirrer. Students add the base in small portions and record the reading after each one. The plotted readings fall and then rise, and the lowest point marks the end point.
Frequently Asked Questions
Do I need the version with a hot plate?
Only if your work needs warm solutions, such as dissolving slow salts or warm titrations. For room temperature titrations and mixing, the plain stirrer is enough and the vessel stays cool.
What is a multi-station stirrer used for?
It has several stirring positions on one base, each turning its own paddle. A teacher can run several titration flasks or several solutions at once, which suits group practicals.
How does an energy regulator differ from a PID controller?
An energy regulator sets the heater to a chosen share of its full power, so the plate temperature changes with the load. A PID controller reads a sensor and adjusts the power to hold a set temperature, shown on a digital display.
Why are the stirring paddles PTFE coated?
PTFE does not react with most laboratory chemicals and little sticks to it. The coating also keeps the magnet inside out of contact with the solution, so it does not contaminate the sample.
Other Magnetic Stirrers and Stirring Bars
For a quote, use Add To Cart or send us a message through the contact page.
Last updated: 12 November 2026
