Measuring Cylinder Manufacturer,Supplier and Exporter in India
Product Code : EL-SLE-5611
Jlab Export is a leading Measuring Cylinder Manufacturer,and suppliers in India
The Measuring Cylinder (code EL-SLE-5611) is a graduated borosilicate glass cylinder with a pouring spout and a glass foot, used to measure volumes of liquids in school, college and university labs. It is listed in six capacities, from 25 ml graduated in 0.5 ml steps up to 1000 ml graduated in 10 ml steps, so each bench can have the size that suits its practical. It is made by Jain Laboratory Instruments Pvt Ltd (JLab) at its works in Ambala, India.
Get a quote: use the Add To Cart enquiry button below, or send your quantity and destination through the contact page.
Specifications
| Parameter | Detail |
|---|---|
| Material | Borosilicate glass |
| Graduations | Graduated |
| Spout | With pouring spout |
| Base | Glass foot |
| Capacities and graduation intervals (as listed) | 25 ml x 0.5 ml; 50 ml x 1.0 ml; 100 ml x 1.0 ml; 250 ml x 2.0 ml; 500 ml x 5.0 ml; 1000 ml x 10 ml |
| Graduation interval and tolerance class | Supplied to the customer’s requirement — specify the graduation interval and the class (for example Class A or Class B) in your enquiry |
| Calibration certificate | Supplied with Class A measuring cylinders |
| Quality check | Each measuring cylinder is visually inspected before dispatch |
| Pack quantity | Each (sold individually) |
| Minimum order quantity | 10 units |
| Dispatch time | Usually 7–10 working days |
| Product code | EL-SLE-5611 |
| Manufacturer | Jain Laboratory Instruments Pvt Ltd (JLab) — OEM |
| Country of origin | India (made in Ambala, Haryana) |
How Does It Compare with Other JLab Measuring Cylinders?
| Listing | Material | Base and spout | Other listed details |
|---|---|---|---|
| This cylinder (EL-SLE-5611) | Borosilicate glass | Glass foot; spout | 25 to 1000 ml with listed graduation intervals; class to order |
| Measuring Cylinder (100 ml, hexagonal base) | Borosilicate glass | Hexagonal base; spout | 100 ml; graduated; heat and chemical resistant |
| Measuring Cylinders (polypropylene) | Polypropylene | Broad base | Single piece; autoclavable; raised graduations |
| Measuring Cylinders Hexagonal | Polypropylene | Hexagonal base; tapered spout | Moulded plastic |
Choose this glass cylinder when you want borosilicate clarity and chemical resistance across a full range of sizes, with the tolerance class set at the order stage. The polypropylene cylinders avoid breakage in junior classes, and the 100 ml glass model with a hexagonal base suits buyers who prefer a base that resists rolling.
What Is a Glass Measuring Cylinder Used For?
A measuring cylinder is the everyday tool for measuring out a volume of liquid — water for a reaction, a solvent for an extraction, or a solution for a biology practical — when the precision of a pipette or burette is not needed. In class 6 to 10 science it is also used to find the volume of an irregular solid by displacement, and from that its density, while class 11 and class 12 chemistry and college labs use it to prepare approximate dilutions and measure reagents. Pick the smallest cylinder that holds the volume you need: 10 ml is measured far more closely in the 25 ml size than in a 1000 ml cylinder.
Stand the cylinder on a level bench, fill it to just below the mark, then add the last few drops with a dropping pipette, reading the bottom of the meniscus at eye level. Borosilicate glass resists most chemicals, but a measuring cylinder is not a heating vessel — heat liquids in a beaker or flask and let them cool before measuring. Rinse it with distilled water after use and drain it upside down.
What to Specify When Ordering
- Capacity — 25, 50, 100, 250, 500 or 1000 ml, and the quantity of each.
- Graduation interval and tolerance class — confirm the interval and whether you need Class A (supplied with a calibration certificate) or Class B; Class A suits analytical work and tenders that call for it, Class B is common for routine teaching.
- Quantity — the minimum order is 10 cylinders; allow spares for breakage.
- Related glassware — add beakers, flasks and dropping pipettes to the same enquiry if needed.
Frequently Asked Questions
Which capacities and graduation intervals are available?
The listing gives 25 ml x 0.5 ml, 50 ml x 1.0 ml, 100 ml x 1.0 ml, 250 ml x 2.0 ml, 500 ml x 5.0 ml and 1000 ml x 10 ml. State the capacity and interval you want for each size.
What is the maximum permitted error of this measuring cylinder?
It depends on the class you order. JLab supplies the cylinder with the graduation interval and tolerance class you specify, such as Class A or Class B, and the maximum permitted error is the limit that applies to that class at the cylinder’s nominal capacity.
Is a calibration certificate supplied?
Yes, with Class A measuring cylinders. Specify Class A in your enquiry if your laboratory or tender needs documented accuracy.
Can a glass measuring cylinder be heated?
No. Even in borosilicate glass, a measuring cylinder is made for measuring, not heating. Warm liquids in a beaker or flask and measure them once they are back to room temperature.
Should I choose glass or polypropylene cylinders?
Glass gives clear graduations and resists most chemicals and solvents. JLab’s polypropylene cylinders, linked above, are single-piece and autoclavable according to their own listings, and suit junior classes where breakage is the main concern.
What is the minimum order and dispatch time?
The minimum order is 10 units, supplied individually. Orders usually leave the works within 7–10 working days after every cylinder is visually inspected; transit time for export orders depends on the destination and shipping method.
What information is needed for an export quotation?
Send the capacities and quantities, the class required, the destination country and port or city, your preferred delivery terms such as FOB or CIF, any packing or labelling requirements, and the tender reference if there is one.
Who manufactures this measuring cylinder?
Jain Laboratory Instruments Pvt Ltd, trading as JLab, makes it at its works in Ambala, Haryana, India, and quotes for it directly as the manufacturer.
OEM Manufacturer
JLab is the trading name of Jain Laboratory Instruments Pvt Ltd, a manufacturer of borosilicate laboratory glassware and teaching equipment in India, incorporated in 2017 and based on Hargolal Road, Ambala, Haryana. These measuring cylinders are made in JLab’s own works rather than bought from a trader, so schools, colleges, dealers and importers buy factory-direct, every cylinder is checked visually before dispatch, and repeat orders in matching sizes and classes are handled by the manufacturer. JLab exports worldwide and ships to buyers in every region — for example Eswatini in Southern Africa, Kyrgyzstan in Central Asia, Sri Lanka in South Asia, Canada in North America and Taiwan in East Asia. Laboratory tender details are on the JLab lab tenders page.
Glassware Used with Measuring Cylinders
- Beakers — graduated borosilicate beakers with a pouring spout for mixing and heating.
- Narrow Neck Conical Flasks, Erlenmeyer, Borosilicate Glass — for reactions and titrations with measured volumes.
- Dropping Pipettes — for adding the last drops up to the graduation mark.
- Wash Bottles — LDPE squeeze bottles for rinsing with distilled water.
See more in the School Lab Equipment range.
Request a Quote
Quotes come direct from the manufacturer. Use the Add To Cart enquiry button on this page, or send the capacities and quantity (minimum 10 units), the graduation interval and class you need, and your delivery location through the contact page.
Last updated: 4 October 2026
.jpg)
