Dropping Pipettes Manufacturer,Supplier and Exporter in India
Product Code : EL-SLE-5599
Jlab Export is a leading Dropping Pipettes Manufacturer,and suppliers in India
Dropping Pipettes (code EL-SLE-5599) are rubber-teat pipettes with a capacity of 1.7 cm3 (1.7 ml) and an overall length of 110 mm, used to draw up a small amount of liquid and release it one drop at a time — indicator into a titration flask, or a reagent into a test tube or spot plate — in school and college science labs. They are made by Jain Laboratory Instruments Pvt Ltd (JLab) at its works in Ambala, India.
Specifications
| Parameter | Detail |
|---|---|
| Capacity | 1.7 cm3 (1.7 ml) |
| Teat | Rubber teat |
| Length | 40 mm (as listed — ask JLab which part this measurement refers to) |
| Overall length | 110 mm |
| Quality check | Each dropping pipette is visually inspected before dispatch |
| Pack quantity | Each (sold individually) |
| Minimum order quantity | 10 units |
| Dispatch time | Usually 7–10 working days |
| Product code | EL-SLE-5599 |
| Manufacturer | Jain Laboratory Instruments Pvt Ltd (JLab) — OEM |
| Country of origin | India (made in Ambala, Haryana) |
How Does It Compare with Other JLab Droppers?
| Listing | Details given on its page |
|---|---|
| These dropping pipettes (EL-SLE-5599) | Rubber teat; 1.7 cm3 capacity; 110 mm overall |
| Dropping Pipette Glass | Glass pipette with a teat; about 75 mm long |
| Dropper | Glass medicine dropper with a rubber handle; 1 ml capacity |
| Glass Dropper | Glass droppers with plastic bulbs |
Choose these when you want a longer dropper with a stated capacity, for example to reach into a conical flask or a tall test tube. The shorter glass pipette and the 1 ml medicine-type dropper suit small vials and slide work, and the plastic-bulb dropper is the option for buyers who prefer a non-rubber bulb.
What Are Dropping Pipettes Used For?
In school chemistry a dropping pipette adds a few drops of indicator such as phenolphthalein or methyl orange before a titration, and delivers reagents drop by drop in qualitative tests and spot-plate reactions; in biology practicals it places a drop of water or stain on a microscope slide. It is a transfer tool, not a measuring one — use a graduated pipette or burette when a volume must be measured. Squeeze the teat before dipping the tip, release it slowly to draw up liquid, and hold the pipette upright so the drops are even. Do not let liquid run into the teat, rinse the pipette with distilled water between reagents to avoid cross-contamination, and replace a rubber teat once it hardens or cracks.
Frequently Asked Questions
What is the capacity of these dropping pipettes?
1.7 cm3, which is 1.7 ml. That is the volume one filling holds; the pipette is not graduated for measuring, so use a graduated pipette or burette for measured volumes.
What does the 40 mm length refer to?
The listing gives a length of 40 mm alongside the 110 mm overall length but does not say which part the 40 mm describes. Ask JLab to confirm it if a particular stem or teat length matters for your use.
Are they glass or plastic?
The listing states a rubber teat but does not name the pipette material. Say which you need in your enquiry and JLab will confirm before quoting.
How do they differ from the Dropping Pipette Glass?
That listing is a glass pipette with a teat, about 75 mm long. These are 110 mm overall with a stated capacity of 1.7 cm3, so they reach deeper into flasks and tubes.
OEM Manufacturer
JLab is the trading name of Jain Laboratory Instruments Pvt Ltd, a maker of school chemistry and biology lab equipment in India, incorporated in 2017 and based on Hargolal Road, Ambala, Haryana. These dropping pipettes are produced at JLab’s own works instead of being sourced from a trader, which lets schools, colleges, dealers and importers order them factory-direct, with every pipette visually checked before packing and repeat orders handled by the manufacturer. JLab exports worldwide and ships to buyers in every region — for example Lithuania in Northern Europe, Namibia in Southern Africa, Rwanda in East Africa, Ireland in Western Europe and Bangladesh in South Asia.
Items Used Alongside Dropping Pipettes
- Dropping Bottle — a narrow-mouth glass bottle for keeping indicators and reagents ready on the bench.
- Spot Plates — a porcelain plate with 6 cavities for drop-scale colour tests.
- Test Tubes Borosilicate — rimmed borosilicate test tubes for the reactions the pipette doses.
- Dropping Pipette Glass — a shorter glass pipette with a teat.
See more in the School Lab Equipment range.
Request a Quote
Quotes come direct from the manufacturer. Use the Add To Cart enquiry button on this page, or send the quantity (minimum 10 units), the pipette material you prefer and your delivery location through the contact page.
Last updated: 4 October 2026
