Refrigerant Hose Manufacturer,Supplier and Exporter in India
Product Code : EL-RACLE-12754
Jlab Export is a leading Refrigerant Hose Manufacturer,and suppliers in India
Each hose in this set is only 10 cm long, for joints where the gauge, pump or adapter sits right beside the service port. The set has one red, one blue and one yellow hose, with 1/4 in flare fittings and a 600 psi working pressure. No compact ball valves are fitted, and a short hose leaves very little refrigerant in the line.
Specifications
| Length | 10 cm |
| Flare fitting | 1/4 in |
| Working pressure | 600 psi |
| Ball valve | Not fitted |
| Set includes | Red, blue and yellow hose, one of each |
| Minimum order quantity | 10 units |
| Dispatch time | Usually 4–6 working days |
| Manufacturer | JLab (Jain Laboratory Instruments Pvt Ltd), Ambala, India |
Workshop Practice with Short Hoses
Students can work out how much gas a hose holds. They measure the bore, then find the inside volume of this 10 cm hose and of a hose from the longer Refrigerant Hose set without valves. The longer hose holds several times more, and all of that gas is either evacuated or lost at each disconnection.
On a bench trainer, a short hose can join one of the Small Vacuum Pumps to a service port when the pump stands right beside the unit. The pump inlet is 1/4 in, so it takes the flare end directly. After a pressure test with the Nitrogen Pressure Test Kit, students check both flare nuts with Bubble Solution For Leak Detection.
Frequently Asked Questions
What are 10 cm hoses used for?
They make short links between fittings that sit close together, such as a pump placed beside a service valve or a gauge fitted on an adapter. A short line holds little refrigerant, so little is lost when it comes off.
Can they replace the hoses on a manifold gauge set?
Only when the manifold sits right at the service ports. For normal work, with the manifold hung on the unit or held in the hand, use a full-length set and keep these hoses for short links.
Do these hoses have ball valves?
No, the ends are plain. Where a hose must be shut off before it is disconnected, use the Refrigerant Hose set that has a compact ball valve on each hose.
Is a short hose better for pulling a vacuum?
Yes. A vacuum pump pulls down faster through a short path, and a 10 cm hose adds little length or inner surface for moisture to cling to. The 1/4 in bore and any core depressor in the hose end still limit the flow. These hoses carry 600 psi, so keep them off systems that run above that.
Other Hoses and Fittings
- Refrigerant Hose (higher-pressure set)
- Hose Adapters
- Liquid Charging Adapters 1/4
- Valve Core Remover
For a quote, use Add To Cart or send us a message through the contact page.
Last updated: 5 November 2026