True RMS General Purpose Clamp Meter Manufacturer,Supplier and Exporter in India
Product Code : EL-M-10472
Jlab Export is a leading True RMS General Purpose Clamp Meter Manufacturer,and suppliers in India
True RMS General Purpose Clamp Meter (code EL-M-10472) is a handheld clamp meter that combines true RMS and average-sensing measurement, so current is read through the jaw without breaking the circuit, even when the waveform is not a clean sine wave. It also tests diodes, reads frequency and takes conductors up to 1.5 in across. This true RMS clamp meter is produced by JLab in Ambala, India.
Specifications
| Parameter | Detail |
|---|---|
| Sensing | True RMS and average sensing |
| Functions | Current through the clamp jaw; frequency measurement; diode test; peak hold |
| Zero adjustment | DC A zero adjustment thumbwheel |
| Maximum conductor size | 1.5 in (about 38 mm) |
| Protection | Surge (transient) voltage protection; protective hand guard |
| Indicator | Low-battery annunciator |
| Operation | Single-handed |
| Quality check | Each clamp meter is visually inspected before dispatch |
| Pack quantity | Each (sold individually) |
| Minimum order quantity | 5 units |
| Dispatch time | Usually 7–10 working days |
| Product code | EL-M-10472 |
| Manufacturer | Jain Laboratory Instruments Pvt Ltd (JLab) — OEM |
| Country of origin | India (made in Ambala, Haryana) |
Why True RMS Matters on Distorted Current
The RMS value of a current is the steady DC value that would heat a resistor by the same amount. An average-sensing meter assumes a sine wave and scales the rectified average by 1.11, which holds only for a pure sine. Currents drawn by rectifiers, drives and other electronic loads are distorted, so an average-sensing reading of them can be wrong; a true RMS meter computes the RMS value from the waveform itself.
Using the Jaw, Zero Wheel and Diode Test
Close the jaw around a single conductor: the meter senses the magnetic field of the current, so nothing is disconnected. Before a DC current reading, turn the DC A zero thumbwheel until the display reads zero with the jaw empty. Peak hold keeps the highest reading on the display, the hand guard keeps fingers back from the conductor, and the diode test checks that a diode conducts in one direction only.
Clamp Meters to Compare With This Model
- 3-3/4 Digit General Purpose Clamp Meter — average-sensing model taking conductors up to 1.5 in.
- Digital Clamp Meter — auto/manual ranging, 4000-count meter with a backlit display.
- Clamp On Meter — reads AC voltage and current up to 500 V and 500 A.
Browse Meters, under Test and Measurement Equipment, for more meters of this range.
Request a Quote
Order via Add To Cart, or send the quantity and the delivery address through the contact page for a quotation.
Last updated: 30 October 2026
