Water Circuit Board Manufacturer,Supplier and Exporter in India
Product Code : EL-SLE-5792
Jlab Export is a leading Water Circuit Board Manufacturer,and suppliers in India
Water Circuit Board (code EL-SLE-5792) is a teaching model that explains how electric current flows by analogy with water moving through tubes, for school electricity lessons. The tubes are fitted on a base and filled with water, an electric water pump drives the flow, and the listing states operation on 220 V AC. Students can watch a “current” they cannot see in a wire. It is made by Jain Laboratory Instruments Pvt Ltd (JLab) at its works in Ambala, India.
Specifications
| Parameter | Detail |
|---|---|
| Purpose | Shows the principles of electrical flow by analogy with water in tubes |
| Construction | Water-filled tubes, all fitted on a base |
| Drive | Used with an electric water pump |
| Operating supply | 220 V AC |
| Quality check | Each board is visually inspected before dispatch |
| Pack quantity | Each (sold individually) |
| Minimum order quantity | 10 units |
| Dispatch time | Usually 7–10 working days |
| Product code | EL-SLE-5792 |
| Manufacturer | Jain Laboratory Instruments Pvt Ltd (JLab) — OEM |
| Country of origin | India (made in Ambala, Haryana) |
What Is the Water Circuit Board Used For?
The water circuit is one of the most familiar ways to introduce electricity. The pump plays the part of a cell or battery: it creates the pressure difference that keeps water moving, just as a potential difference drives charge. The rate of water flow stands for current, and narrow or long sections of tube resist the flow as a resistor does. In a single loop the same amount of water passes every point, as current is the same everywhere in a series circuit; where a path divides, the flow splits and then recombines, as current does in parallel branches. The model suits introductory lessons on electric current and circuits in classes 6 and 7 and helps older students in class 10 picture current, potential difference and resistance before they work with meters. Point out where the analogy stops — for example, a broken wire stops current at once, while an open tube leaks.
Because the pump runs on 220 V AC mains close to water, keep the plug, socket and pump connections dry, switch off at the mains before filling, emptying or moving the board, and let a teacher handle the mains connection. Drain the tubes or top them up with clean water as needed so the flow stays easy to see.
What to Specify When Ordering
- Quantity — the minimum order is 10 boards.
- Pump and plug — confirm whether the electric water pump is supplied with each board and which mains plug type you need.
- Electrical follow-up — circuit boards, ammeters and rheostats for the matching electrical experiments are separate catalogue items.
Frequently Asked Questions
What does the water circuit board demonstrate?
The principles of electrical flow, shown by analogy with water flowing through tubes. The pump stands for the cell, the flow rate for the current and narrow sections of tube for resistance.
What power supply does it need?
The listing states that the circuit operates on 220 V AC, which powers the electric water pump. Tell JLab your mains voltage and plug type if they differ.
Is the water pump included?
The listing says the board is used with an electric water pump but does not say whether the pump is supplied with every board. Confirm this in your enquiry so the quotation covers everything you need.
How is the analogy useful in class?
Students cannot see electric current, but they can see water moving. Seeing water move through the tubes makes ideas such as current being the same all round a series loop, and dividing at junctions, easier to picture before students measure them with an ammeter.
What details are needed for an export quotation?
The quantity, destination country and port or city, delivery terms such as FOB or CIF, packing or labelling needs, mains plug type and any tender reference.
Who manufactures the water circuit board?
JLab — Jain Laboratory Instruments Pvt Ltd — makes it at its Ambala works in Haryana, India, and quotes for it directly as the manufacturer.
OEM Manufacturer
JLab is the trading name of Jain Laboratory Instruments Pvt Ltd, a manufacturer of science teaching models and school laboratory equipment in India, incorporated in 2017 and based on Hargolal Road, Ambala, Haryana. The water circuit board is assembled at JLab’s own works rather than sourced from a trader, so schools, colleges, dealers and importers buy factory-direct, each board is visually inspected before dispatch, and repeat orders are handled by the manufacturer. The company is registered for GST under GSTIN 06AADCJ9848D1ZE and holds Legal Entity Identifier 549300DTGS77DGYD6N03. JLab exports worldwide and ships to buyers in every region — for example Brunei in Southeast Asia, Romania in Eastern Europe, Panama in Central America and the Caribbean, Egypt in North Africa and Sri Lanka in South Asia. Tender details are on the JLab lab tenders page.
Electric Circuit Apparatus
- Circuit Board — a circuit-building board with connectors, lamp holders, a rheostat and push switches.
- Worcester Circuit Board — a terminal board with pillars, clips and accessory units for many circuits.
- D.C. Ammeter — a dual-range meter for measuring the current the water model illustrates.
- Rheostats (Nichrome Type) — sliding-contact variable resistors for real circuits.
See the full School Lab Equipment range.
Request a Quote
Quotes come direct from the manufacturer. Use the Add To Cart enquiry button on this page, or send the number of boards (minimum 10 units), your mains plug type, whether you need the pump with each board, and your delivery location through the contact page.
Last updated: 4 October 2026
