Wing Divider Manufacturer,Supplier and Exporter in India
Product Code : EL-CLE-9095
Jlab Export is a leading Wing Divider Manufacturer,and suppliers in India
A wing divider has two pointed legs that scribe arcs and circles on metal and step off equal distances. On this one the legs are box jointed and fine polished. A wing and locking screw hold the legs at the spread you set, so the size does not creep while you mark.
Specifications
| Joint | Box jointed |
| Finish | Fine polished |
| Setting | Wing and locking screw |
| Use | All metal work in the workshop |
| Minimum order quantity | 10 units |
| Dispatch time | Usually 4–6 working days |
| Manufacturer | JLab (Jain Laboratory Instruments Pvt Ltd), Ambala, India |
Workshop Practice: Marking Out a Template
A good marking-out exercise is a flange or gasket template on sheet steel. Students set the divider from a Steel Rule, make a light dot at the centre with the Punch Tool, and scribe the outside circle and the bolt circle.
With the divider still set to the radius of the bolt circle, stepping round it gives six equal points, the corners of a hexagon. The hole centres are then punched, and straight lines are drawn with a Single Ended Scriber.
Frequently Asked Questions
How do I set the divider to a size?
Put one point in a graduation line on a steel rule, such as the 10 mm mark, not on the worn end. Open the other leg to the size needed, then tighten the locking screw on the wing.
Why make a punch mark before scribing a circle?
The fixed point needs somewhere to sit. A light centre punch dot holds it, so the leg does not skid across the metal while the other point is swung round.
What does a box joint do on a divider?
One leg is forked at the top and the other fits inside it, with a pin through both. This gives the joint a wide bearing, so the legs open smoothly without wobbling sideways.
How do I make lines easier to see on bright metal?
Coat the area with marking blue, or with chalk on a rough surface, before marking out. The scribed arc then shows as a fine bright line on a dark ground.
How are the points kept sharp?
Rub them lightly on an oilstone, turning the leg as you go, and keep the two legs the same length. Store the divider closed, or with the points pushed into a cork.
Other Marking-Out Tools
- Protractor (steel, graduated both ways)
- Universal Surface Gauge (scriber with clamps on a spindle)
- Scriber (double ended, hardened steel)
- Engineers Square (hardened and ground blade)
For a quote, use Add To Cart or send us a message through the contact page.
Last updated: 5 November 2026
