C Arm O.T. Table Manufacturer,Supplier and Exporter in India
Product Code : EL-OTF-2031
Jlab Export is a leading C Arm O.T. Table Manufacturer,and suppliers in India
Imaging with a C-arm during an operation needs a top that X-rays can pass through. Each of the five sections of this table carries a 12 mm radiographic sheet, with a 50 mm polyurethane mattress on top that lifts off for cleaning. The base is stainless steel, and an auto floor locking device holds the table still on the floor.
Specifications
| Table top | Five sections with a 12 mm radiographic sheet |
| Mattresses | Polyurethane, 50 mm thick, removable for cleaning |
| Base | Stainless steel |
| Floor lock | Auto floor locking device |
| Top size | 1890 x 510 mm |
| Height adjustment | 760–990 mm |
| Trendelenburg / reverse | 30° / 30° |
| Lateral tilt | 20° / 20° |
| Kidney elevator | 150 mm |
| Back, leg and head rests (up / down) | 80° / 25°, 15° / 90°, 20° / 90° |
| Minimum order quantity | 1 unit |
| Dispatch time | Usually 14–18 working days |
| Manufacturer | JLab (Jain Laboratory Instruments Pvt Ltd), Ambala, India |
Lab Exercises for Theatre and BME Students
A level check is a good first exercise. Students set the table to its zero position and lay a Spirit Level along and across each section. They then tilt the top to each end stop and measure the height of both ends from the floor. From the difference and the 1890 mm top length they work out the angle and compare it with the 30° tilts on the table sheet.
Theatre technician students practise the floor lock: lock it, push the table to see that it holds, release it and move the table to a new spot. They also strip and refit the mattresses, clean the radiographic sheets beneath them, and set an Instrument Trolley where it will not block the C-arm path.
Frequently Asked Questions
Does the mattress spoil the X-ray image?
The mattress lies over the radiographic sheet and is part of what the beam passes through. Keep it flat, dry and free of folds. Remove pins, clips and other metal from the sheets, since these show on the image far more than the padding does.
Will our C-arm fit round this table?
Compare the C-arm with the table sheet. The top is 510 mm wide and rises from 760 to 990 mm, so check the arm’s opening and its reach under the top across that height range before you order.
What does the auto floor locking device do?
It fixes the table to the floor so that it cannot roll while staff lean on it or the C-arm is pushed against it. Release the lock before moving the table to another room or position.
How are the mattresses cleaned?
They are built to come apart from the top. Lift each one off, wipe it and the radiographic sheet underneath with the hospital’s disinfectant, and let both dry fully before refitting. Check the covers for cuts, since liquid can soak in through a split.
How far does the head rest fold down?
The head rest goes 20° up and as far as 90° down, further than on many general tables. With the back rest at 80° up or 25° down and the leg rest at 15° or 90°, the top can be set for most positions.
Other Operation Theatre Tables
- Gear Matic Hydraulic O.T. Table (foot pedal hydraulics)
- Electromatic O.T. Table
- Super Deluxe O.T. Table
For a quote, use Add To Cart or send us a message through the contact page.
Last updated: 12 November 2026
