Creep Testing Machine Manufacturer,Supplier and Exporter in India
Product Code : EL-SOMLE-8922
Jlab Export is a leading Creep Testing Machine Manufacturer,and suppliers in India
Creep Testing Machine (code EL-SOMLE-8922) is a table unit for studying the creep behaviour of materials, using flat lead and PP specimens of 2 × 5 mm cross-section and 25 mm measured length under tensile stresses of 5–25 N/mm². A position gauge measures extension over 0–10 mm with 0.01 mm resolution. This creep table unit is a JLab product, made in Ambala, India.
Specifications
| Parameter | Detail |
|---|---|
| Unit type | Table unit for creep experiments |
| Specimens | Flat, lead and PP |
| Specimen cross-section | 2 x 5 mm |
| Measured length | 25 mm |
| Tensile stress range | 5–25 N/mm² |
| Position measurement | 0–10 mm range, 0.01 mm resolution |
| Temperature | Above or below room temperature with a conditioning box |
| Quality check | Each creep testing unit is visually inspected before dispatch |
| Pack quantity | Each (sold individually) |
| Minimum order quantity | 1 unit |
| Dispatch time | Usually 14–18 working days |
| Product code | EL-SOMLE-8922 |
| Manufacturer | Jain Laboratory Instruments Pvt Ltd (JLab) — OEM |
| Country of origin | India (made in Ambala, Haryana) |
Plotting the Creep Curve
The specimen is held under a constant tensile load at a steady temperature, and its extension is read at intervals. Strain is the extension divided by the 25 mm measured length, and strain plotted against time gives the creep curve. After the instant elastic stretch, the strain rate falls during primary creep, settles to a near-constant minimum in secondary creep and rises again in tertiary creep as the specimen necks towards rupture. Repeating the test at other stresses within the 5–25 N/mm² range shows how strongly the creep rate depends on stress.
Why Lead and PP Specimens
Lead and polypropylene (PP) both creep noticeably at room temperature, so creep curves can be recorded without a furnace. With a conditioning box, the same specimens can be tested above or below room temperature to show how temperature speeds up or slows down creep.
Fatigue and Tensile Machines to Pair with Creep Tests
- Fatigue Testing Machine — counts cycles to failure under lever-applied repeated load.
- Tensile Testing Machine — electrically operated tensile strength and elongation testing.
- Universal Testing Machine — tensile and compressive properties with a roll autographic recorder.
For the other machines in this group, see Strength of Materials Lab Equipments in Mechanical Engineering Lab Equipment.
Request a Quote
Request a quote with Add To Cart or through the contact page, stating the quantity, the delivery address and whether tests above or below room temperature are planned.
Last updated: 30 October 2026
