DC Power Supply Manufacturer,Supplier and Exporter in India
Product Code : EL-PL-12573
Jlab Export is a leading DC Power Supply Manufacturer,and suppliers in India
DC Power Supply (code EL-PL-12573) is a high-current bench supply with a digital display, giving 0–16 V and 0–10 A with continuous coarse and fine adjustment of both voltage and current. It runs as a constant-voltage source with current limiting or as a constant-current source with voltage limiting, and is protected against short circuits, excess current and excess voltage. JLab manufactures the unit in Ambala, India.
Specifications
| Parameter | Detail |
|---|---|
| Model | SCK955/032 |
| Output voltage | 0–16 V |
| Output current | 0–10 A |
| Fine adjustment range | 800 mV (voltage); 2 A (current) |
| Stability at 0–100% load | < 12 mV |
| Residual ripple | < 1 mV |
| Operating modes | Constant voltage with current limiting; constant current with voltage limiting |
| Protection | Short circuit, excess current, excess voltage |
| Display | Digital |
| Mains supply | 115 V / 230 V, 50/60 Hz |
| Quality check | Each power supply is visually inspected before dispatch |
| Pack quantity | Each (sold individually) |
| Minimum order quantity | 1 unit |
| Dispatch time | Usually 7–10 working days |
| Product code | EL-PL-12573 |
| Manufacturer | Jain Laboratory Instruments Pvt Ltd (JLab) — OEM |
| Country of origin | India (made in Ambala, Haryana) |
Choosing Constant-Voltage or Constant-Current Mode
In constant-voltage mode the output holds the set voltage and the current control acts as a ceiling: if the circuit tries to draw more, the supply holds the current at that limit and lets the voltage fall instead, which limits the damage from a wiring slip. In constant-current mode the roles swap. Set the current and the supply raises its voltage, up to the voltage limit, to keep that current flowing, a convenient way to run electrolysis cells, coils and electromagnets at a fixed current.
What the Control and Stability Figures Mean
The coarse controls cover the full range quickly, and the fine controls, spanning 800 mV and 2 A, make the last small adjustment easy. Stability under 12 mV from no load to full load means the output hardly shifts when a circuit is switched in, and ripple below 1 mV keeps the output smooth enough for electronics and sensor work.
Related Supply and Circuit Items
- AC/DC Power Supply — stepped AC and DC outputs in one-volt steps for general experiments.
- Battery Eliminator 12 Volt — tapped low-voltage outputs chosen with a rotary switch.
- Rheostat — heavy-duty 10 Ω variable resistor for current control in a circuit.
- Digital Multimeter — checks voltage and current in the circuit being powered.
Other power supplies and meters are in Physics Lab.
Request a Quote
Add the supply with Add To Cart, or send the number of units, your mains voltage and the delivery address through the contact page.
Last updated: 26 October 2026
