Digital Oscilloscope Manufacturer,Supplier and Exporter in India
Product Code : EL-O-10372
Jlab Export is a leading Digital Oscilloscope Manufacturer,and suppliers in India
Digital Oscilloscope (code EL-O-10372) is a four-channel scope with 16 digital channels for embedded design and test, offered at 50, 70 or 100 MHz analog bandwidth with sampling of up to 1 GSa/s. A two-channel 25 MHz waveform generator is built in, and a 7-inch WVGA display shows the traces with multi-level intensity grading. Its maker is JLab, which produces this four-plus-sixteen-channel scope in Ambala, India.
Specifications
| Parameter | Detail |
|---|---|
| Analog bandwidth | 50, 70 or 100 MHz |
| Channels | 4 analog, 16 digital |
| Maximum sample rate | Up to 1 GSa/s |
| Memory depth | Up to 12 Mpts; 24 Mpts optional |
| Waveform capture rate | Up to 30,000 wfms/s |
| Vertical range | 1 mV/div – 10 V/div |
| Display | 7-inch WVGA (800 x 480), multi-level intensity grading |
| Built-in waveform generator | 2 channels, 25 MHz |
| Interfaces | LAN, USB host and device, AUX, USB-GPIB (optional) |
| Options | Real-time waveform record up to 60,000 frames; serial bus trigger and decode (RS232, I2C, SPI) |
| Quality check | Each oscilloscope is visually inspected before dispatch |
| Pack quantity | Each (sold individually) |
| Minimum order quantity | 1 unit |
| Dispatch time | Usually 7–10 working days |
| Product code | EL-O-10372 |
| Manufacturer | Jain Laboratory Instruments Pvt Ltd (JLab) — OEM |
| Country of origin | India (made in Ambala, Haryana) |
Analog and Logic Inputs for Embedded Boards
Embedded work usually means watching a few analog nodes while firmware toggles digital lines. Here the four analog inputs and 16 logic inputs share one time base, so a chip-select pulse can be lined up with the analog response it causes. With the serial bus option, RS232, I2C and SPI traffic can trigger the scope and be decoded on screen.
Using the Built-In Two-Channel Generator
The 25 MHz generator can feed a test signal into the circuit while the scope measures the result, so a filter or amplifier stage can be checked without a separate signal source. Memory of 12 Mpts comes as standard with 24 Mpts as an upgrade, and the low noise floor lets the vertical range start at 1 mV/div for small signals.
Other Four-Channel Scopes at Up to 100 MHz
- 50MHz Digital Oscilloscope — four channels with FFT and mask testing as standard.
- 100 MHz Digital Oscilloscope with 4 Channels — four channels plus a built-in two-channel 25 MHz generator.
The full range sits in Oscilloscopes, a branch of Test and Measurement Equipment.
Request a Quote
Choose 50, 70 or 100 MHz and add the scope via Add To Cart, or reach us through the contact page with the memory and decode options, the quantity and the delivery address.
Last updated: 30 October 2026
